The moves in chess are not only manifold, but involute.
下棋的走法不但多种多样，而且错综复杂。
Helical rotor is the most important part of rotor flow meter, and its section shape is normally formed by involute and cycloid.
螺旋转子是转子流量仪表中的心脏零部件，其截面形状一般由渐开线和摆线组合而成。
The application of extrusion processing in involute profile can not only raise the production efficiency but also enhance the strength and accuracy of involute profile.
采用挤压加工方法对渐开线齿形部分进行加工，不仅能显著地提高生产效率，而且还能提高齿形的强度和齿形精度。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
We invent the spherical gear with ring involute tooth.
发明了渐开线环形齿球齿轮机构。
Cycloid was used to modify the involute tooth profile.
用摆线对渐开线齿轮齿形进行修形。
Involute Spline is one having teeth with involute profiles.
花键的键齿的齿形为渐开线形式的花键。
The standard involute cylinder gear is studied in this paper.
本文以标准渐开线直齿圆柱齿轮作为研究对象。
At last, the result of the involute gear driving design is described.
最后给出了渐开线齿轮传动设计的计算结果实例。
The optimum design method of involute internal gear slotting cutter is introduced.
介绍了渐开线直齿内齿轮插齿刀的优化设计方法。
The parameter equation of involute tooth profile on any angular position is presented.
提出了任意转角位置的渐开线齿轮齿廓的参数方程。
The relative sliding ratio formulas of an involute internal spur gear pair are developed.
推导了渐开线内齿轮副相对滑动率的计算公式。
This paper advanced a practical and succinct formula for tooth number choice of involute gear.
从等强度概念出发，推出一个据以选取渐开线齿轮齿数的简单、实用公式。
Internal gear pump has two kinds of tooth profile namely: involute profile and cycloidal tooth profile.
内啮合齿轮泵有两种齿形即：渐开线齿形和摆线齿形。
For the involute screw surface enveloped worm indexing CAM mechanisms, the contact area was calculated.
并对渐开线螺旋面包络蜗杆分度凸轮机构的接触域面积进了实例分析计算。
On the base of principle of involute gear and its property, the formation of tooth surface are introduced.
根据渐开线齿轮的原理和渐开线的基本性质，介绍渐开线齿轮齿廓的形成。
To model involute gears accurately, a formula for calculating the involute curve of gear profile is presented.
为解决渐开线齿轮的精确造型问题，提出了齿廓渐开线曲线的计算公式。
The design of involute planetary gear pair with a slightly different tooth number of zero restraint is introduced.
文中还介绍了零约束渐开线少齿差行星齿轮传动的机构设计。
The stub gear tooth is often adopted in the involute planetary gear transmission with a few tooth number difference.
在渐开线少齿差行星传动中通常使用短齿，其齿根高与正常齿相同，而齿顶高小于正常齿。
This paper discussed the relationship between the involute pitch of tooth root and tooth profile involute in hobbing.
本文阐述了滚刀滚齿时齿轮齿根过渡曲线的延长渐开线的等距线与齿轮齿形渐开线的关系。
This paper studies the measurement of involute master on SIP three-coordinates measuring system by programming control.
本文主要研究在SIP三座标测量系统上程控测量渐开线样板。
The article described the rolling forming of the little modulus involute spline, designing and manufacturing of the roller.
阐述了小模数渐开线花键的滚轧成形，滚轮的设计及制造。
In this paper, an approximate method of using three tangent arcs to substitute the involute gear profile curve is put forward.
提出用圆弧来代替渐开线齿形的近似方法，实现了渐开线齿轮三维实体造型的直接编程生成技术。
The dynamic contact finite element models of standard involute gear and modification gear are established in the software of ANSYS.
在ANSYS软件中建立了标准渐开线齿轮与修形齿轮的动力接触有限元模型。
A novel reflector is proposed, which is simile in form to involute, and has advantages of smaller width than that of standard involute.
提出一种新的反射器几何构型仿渐开线型，其外形与标准渐开线相似，但翼展宽度短于标准渐开线反射器。
A novel reflector is proposed, which is simile in form to involute, and has advantages of smaller width than that of standard involute.
提出一种新的反射器几何构型仿渐开线型，其外形与标准渐开线相似，但翼展宽度短于标准渐开线反射器。
应用推荐