That slot left in the wood after a saw goes through is called the kerf.
锯过木头后留下的锯缝就叫做kerf。
Optimize further for equipment, raise kerf ability to lay a foundation.
为设备进一步优化，提高割缝能力奠定基础。
Range of kerf width and exposure may be changed for optimized performance.
一系列的切缝宽度和曝光可能会改为优化的表现。
Can cut conductive material in wantonly shape, get good kerf and smooth edge;
对各种导电材料可随意形状进行切割，可得到优良的切口和平整的表面；
The effects of laser process parameters on kerf width and quality were studied.
系统研究了工艺参数对切缝宽度和切缝质量的影响规律。
As a bonus, in researching this little factoid I discovered a new word I hadn't known before; kerf.
我在查询这个小词的时候，额外地发现了一个我以前不知道的新词：kerf。
And some thin kerf, but also are less likely to cut stone, cut so thin because of the stones will fracture stone.
而有些薄壁，也不太可能削减石，切割，因为薄的石头会断裂石材。
The results show that kerf width decreases with pulse frequency increases under the same average power and pulse width.
结果表明，当平均功率和脉冲宽度相同时，切缝宽度随着脉冲频率的增大而减小；
Laser cutting head coming with automatic touching system, adapt to the jagged materials and keep cutting kerf precision.
激光切割头配有自动高度跟随系统，适应材料高低不平，保证切割刀缝一致。
The results showed that the kerf width increases with the increase of the power density, pulse frequency and pulse width;
结果表明，缝宽随激光功率密度、频率以及脉宽的增加而加大；
The kerf is the outside boundary of the tunnel wall that a boring machine gouges out as it bores through the ground or rock.
切口在隧道壁边界的外面，隧道壁是由钻机在钻透土地或岩石时挖出的。
New clamping systems, low noise tooling, thin kerf saw blades, update cutters and their application were introduced in the paper.
本文将着重阐述刀具装夹、低噪声刀具、薄锯路圆锯片、新型刀具及应用。
In the same of average power, peak power and duty cycle constant, pulse width is the primary parameter which affects the kerf width.
在相同的平均功率、峰值功率和脉宽比下，脉冲宽度是影响切缝宽度主要参数。
An experimental study is presented to investigate the effects of cutting conditions on kerf geometry with variable process parameters.
采用连续改变激光切削参数的方法，研究了切割条件对切口形状和尺寸的影响及切口控制方法。
At last, the authors give a compensation principle for dimensional accuracy control of grooving kerf width with laser beam for seamless pipe.
最后提出了管材激光割缝时槽宽尺寸精度控制的补偿原则。
To reduce the kerf width and to improve the kerf quality, the experiments of ceramic cutting with water constricted plasma arc are carried out.
为减小切口宽度，提高切口质量，进行了水再压缩等离子弧切割陶瓷实验研究。
This system is applied to the profile lining and cutting robot system, which improves the precision of lining and cutting and makes the kerf smooth.
将该系统应用于船用型材划线切割机器人系统中，提高了划线和切割精度，且切口平整。
In order to reduce the kerf width and improve the kerf quality, the hydromagnetically confined plasma arc was used to cut engineering ceramic plates.
为减小陶瓷板件切口宽度，提高切口质量，采用水箍和磁场对附加阳极等离子弧进行综合二次约束。
Phenomenon of erosion delay in forming kerfs by abrasive waterjet will cause kerf incline in straight cutting or kerf taper in circular cutting process.
磨料水射流加工在切口形成过程中出现冲蚀延时现象，从而在直线切割时形成切口斜度，在圆形零件切割时形成切口锥度。
The wire sawing process has been applied to slice single silicon into thin wafers for its character of minimum warp, uniform thickness and low kerf loss.
由于线锯切割具有切片薄、表面翘曲变形小、厚薄均匀和切口损失小等优点，被广泛用于单晶硅切片加工。
Based on the theory of rock mechanics that applied in country rock kerf, and using bolt support can remove the heave of bottom, which gets good effect in practice.
施工中应用巷道围岩切缝法的岩石力学理论分析，采用锚杆支护法解决底板臌起现象，收到良好效果。
The effects on kerf width and quality made by laser facula diameter, focal point position, cutting speed, laser power and other technological parameters were studied.
研究了激光光斑直径及离焦量、切割速度、激光功率等工艺参数对齿轮切缝宽度及加工质量的影响。
As a bonus, in researching this little factoid I discovered a new word I hadn't known before; kerf. When you cut up a log into boards the thickness of your saw matters.
我在查询这个小词的时候，额外地发现了一个我以前不知道的新词：kerf .当你要把一根原木切割成一块块木板时，你的锯的厚度很关键。
The novel ring is characterized in that a kerf is arranged on the original ring, and the primary snap ring and the secondary snap ring are arranged at two ends of the kerf.
本实用新型提供一种由戒指和子母扣环组成的新型戒指环，其特征是：在原有的戒指上设置断口，断口两端设置有子母扣环。
At last, the authors regard that variable parameters are necessary for people to adopt in order to obtain a uniform kerf width for thin seamless steel pipe with a small diameter.
最后提出，为了获得均匀宽度的圆周切缝，对于薄壁小管径无缝钢管激光切缝，应采取变工艺参数的措施。
The basic principle, test device, and the regularity of cutting parameters affecting to the arc characteristics, kerf width, kerf Angle, and dross free cutting speeds are dealt with.
内容涉及基本原理、实验装置及加工参数对弧柱特性、切口宽度、切口角、无渣切速的影响规律。
The results show that the kerf width increases with the increase of laser power, pulse frequency, pulse width and assist gas pressure, but decreases with the increase of cutting speed.
结果表明：缝宽随输出功率、频率、脉宽及辅助氧压的增大而增加，随着切割速度的增加而减小。
This is achieved by using a unique multi beam technology, demonstrated in figure 2, which reduces the power density, minimizes the thermal load, and reduces the kerf width in the wafer.
这是采用独特的多光束技术实现的，图2显示了其工作原理，降低了功率密度，减小了热负载，缩小了刻线宽度。
The technology has the advantages of thin kerf, increased cutting speed, good quality, elimination of hazardous waste slurry and ability to machine harder brittle and bigger dimension materials.
该技术具有切缝窄、锯切效率高、切片质量好、对环境污染小、能加工大直径工件和超硬材料等优点。
The technology has the advantages of thin kerf, increased cutting speed, good quality, elimination of hazardous waste slurry and ability to machine harder brittle and bigger dimension materials.
该技术具有切缝窄、锯切效率高、切片质量好、对环境污染小、能加工大直径工件和超硬材料等优点。
应用推荐