Servo control system is one branch of motion control system.
伺服控制系统属于一种更为狭义的运动控制系统。
Motion controller is the core of opening motion control system.
运动控制器是开放式运动控制系统的核心。
The core of the motion control system is a microcontroller, MSP430.
运动控制系统的核心是单片机MSP430。
Motion control system is the important component of the mobile robot.
控制系统是移动机器人的重要组成部分。
Open motion control technology is the kernel of the motion control system.
开放式运动控制技术是开放式控制系统的核心技术之一。
Motion control system is composed of the motor, driver, controller and sensor.
运动控制系统包括电机、驱动器、控制器和传感器。
A design scheme of motion control system based on parallel port of computer was proposed.
提出了一种基于计算机并行口的运动控制系统的设计方案。
A completed mathematical model of vector control in motion control system was established.
建立了运动控制系统矢量控制完整的数学模型。
A design of the open motion control system based on PC and motor control card was presented.
提出一种基于PC和运动控制卡的开放式运动控制系统的设计方案。
In motion control system, interpolation calculation and tracking control are hard real-time tasks.
在运动控制系统中，插补计算与跟踪控制算法是强实时任务。
The motion control card is extensively applied in the high-level control unit of the motion control system.
运动控制卡是可以广泛应用于运动控制系统的上位控制单元。
The learning of motion control system focuses on the relation of fundamental theories, devices and algorithms.
这门课程的学习应把握基本原理、器件、算法及三者的内在联系。
The problems associated with motion control system and data processing system in plane measurement were studied.
主要研究了测量运动控制系统和数据处理系统在平面测量时的相关问题。
The application of FPGA device in high speed and high precision motion control system is introduced in this paper.
介绍了FPGA器件在高速高精运动控制系统中的应用。
This paper designs a DC servo control system based on DSP, it is a part of industry scene level motion control system.
本文设计开发了一套基于DSP的直流伺服控制系统，它是工业现场级运动控制系统的一部分。
Motion control system of an ultra precision wafer stage with application to integrated circuit production was presented.
描述一种应用于集成电路制造的超精密硅片台系统及其运动控制。
A tracked mobile robot has been investigated in this paper, and TMS320F2812 is used as system core to build its motion control system.
本文以履带式移动机器人为研究对象，以TMS320F 2812为系统核心，构建了履带式移动机器人的运动控制系统。
The main works are listed as follows:1. A distributed multi-axis motion control system, based on DSP and FPGA techniques, is proposed.
基于DSP和FPGA技术，提出了一种分布式多轴交流伺服运动控制系统。
This paper introduces a double freedom degree motion control system of satellites antenna based on dual-redundancy hybrid stepping motor.
介绍了一种基于双余度混合式步进电动机的双自由度卫星天线运动控制系统。
This paper introduces the software and hardware design of CAN intelligent sensor node, which is used in a distributed motion control system.
介绍了应用于某分布式运动控制系统的CAN智能传感器节点的软硬件设计。
A new type mobile robot motion control system based on EPOS motion controller is designed, and the software for its application is also developed.
设计了一种新型的基于EPOS运动控制器的移动机器人运动控制系统，并对EPOS运动控制器进行了应用开发。
This paper presents an open software design of a DSP - based high - speed motion control system, which is applied in laser rapid - prototyping system.
描述以基于DSP处理器为核心，用于激光快速成型系统的高速运动控制系统软件的体系结构及其开放式设计。
The software includes the modeling, probe qualification, coordinates-setting, design of motion control system, path-planning of measurement and so on.
测量机的软件部分又包括测量数学模型的建立、测头的校正、坐标系的建立、测量运动的控制、测量路径的规划等等。
In addition, the air cushion is used to provide a powerful motion control system to stabilize the T-Craft during cargo transfer operations at the sea base.
另外，气垫也被用来提供强有力的运动控制，以使t - Craft在海洋基地运输过程中保持稳定。
Then the circuit and program of on-board motion control system are designed according to the needs, including chief MCU circuit and motor control circuit.
其次，根据设计要求，进行底层运动控制系统硬件电路和软件程序的设计，主要包括了主控制器电路和电机控制电路。
Multi-axis coordinate control strategy is the core of the multi-axis motion control system. It influences performances of the motion control system directly.
多轴协调控制策略是多轴运动控制系统的核心，它直接决定了运动控制系统的性能。
An adaptive fuzzy integral type sliding mode control method based on GA was proposed to control single-axis motion control system with nonlinear dynamic friction.
提出一种基于GA的自适应模糊积分型滑模控制策略，并将其用于具有非线性动态摩擦力的单轴运动控制系统中。
For the decision motion control of the CT machine, this paper analyzed the key technology, including the network communication, the application of opening motion control system.
文章针对工业CT机床所需要的精密运动控制作了关键技术的分析实现，包括信息的网络通讯、开放式运动控制系统的应用开发。
Motion control system, with the characteristics of high practice, rapid update and great teaching difficulty, etc, is the core curriculum of electrical automation major in college.
《运动控制系统》是高等院校电类自动化专业的一门核心专业课程，具有实践性强、内容更新快、教学难度大等特点。
Motion control system, with the characteristics of high practice, rapid update and great teaching difficulty, etc, is the core curriculum of electrical automation major in college.
《运动控制系统》是高等院校电类自动化专业的一门核心专业课程，具有实践性强、内容更新快、教学难度大等特点。
应用推荐