The stamping process and mould design of baggage frame are introduced.
介绍了行李架的冲压方案确定及模具设计。
The roll forming process and mould design of wheel rim are introduced.
分析了滚形轮辋的制造工艺，并提出了合理的成形工艺和模具结构。
Review the content of each working procedure in the process of mould design.
评审模具设计过程中各工序内容；
Technology and mould design have been introduced with practical parameters design.
通过生产实践对其模具进行了参数设计。
It is also equipped with the strong mould design, manufacture and developing capabilities.
还具备很强的模具设计，制造开发能力。
It is mainly due to the low level of mould design and manufacture and the low produce speed.
而这主要是由国内模具设计制造水平低、速度慢引起的。
The tribological problem was discussed for the mould design by invalidation analysis of mould.
通过模具的失效分析，讨论了模具设计中的摩擦学问题。
The cold extrusion process and mould design have been introduced of the pressing drill sleeve.
介绍了冲钻套筒的冷挤压工艺、模具设计。
Appoint a design engineer to take charge of the mould design and inform manufacturing engineer.
指定一名设计师统筹此模具的设计工作，并知会制造工程师。
The way in this paper is of great significance in the mould design for complex shaped die-casting.
所采取的修改方案以及研究方法对形状复杂的压铸件的模具设计有重要的指导意义。
The applications and mould design of injection mould computer aided engineering(CAE) are introduced.
着重介绍了注塑模具计算机辅助制造（CAE）的应用和模具设计。
The injection mould design of pressure head is introduced, and the points of design are also elaborated.
对押头注塑模设计的实例介绍，详细阐述了其中的设计要点。
The application showed that the mould design was simplified, the cost was lowered and the efficiency was raised.
实践证明，强制脱模的模具结构简单，成本低，使用效果好。
My company has mould design, mould processing, precision stamping diversified combination of supporting capacity.
我公司拥有模具设计、模具加工、精密冲件等多元化相结合的产能配套。
Basic principles of rotational moulding, process features and mould design criteria are introduced in this article.
本文概述了滚塑成型的基本原理、工艺特点和模具设计要点。
Basic principles of rotational moulding, process features and mould design criteria are introduced in this article.
白文概述了滚塑成型的根本原理、工艺特性和楦子设想要端。
Structure design, mould design and manufacturing, injection forming and second processing of thin lens are introduced.
介绍薄型透明片的结构设计及模具设计制造、注射成型、二次加工。
The difficulty in the mould design is how to form a number of apertures in four side face by side core-pulling mechanism.
该模具设计的难点是四个侧面都需要通过抽芯成型多个侧孔。
The characterteristic, molding process of injection-compression molding and the key points of mould design were described.
阐述了抑制塑料透镜变形所采用的注射-压缩成型技术的特点、成型过程及其模具设计的要点；
The forming process of TPU was discussed and both the mould design and manufacturing method were introduced in this article.
分析了TPU(热塑性聚氨脂材料)的成型工艺，并详细介绍了TPU注射模的设计和制造方法。
In this paper, critical technology and forming process of platform plate mould design are stated by way of platform plate products.
以大型平台板产品为例，介绍了矿用大型平台板模具设计中的关键技术及成形工艺。
Though mold CAE technology has already been used in injection mould and die casting mould design recently, there are still many problems.
近年来，模具CAE技术虽然已在注塑模、压铸模设计中得到应用，但仍存在不少问题。
Taking a typical model for example, the mould design and fabrication process for vacuum assisted RTM with a flexible mould are introduced.
以一个典型构件缩比件为例，介绍了软模及真空辅助rtm工艺用模具的设计和制备过程。
The influence factors of mould life was analysed by invalidation analysis of mould. The tribological problem was discussed for the mould design.
通过实用模具的失效分析，讨论了影响模具寿命的主要因素，并探讨了在模具设计中的摩擦学问题。
Forming technology of PVC decoration panel is introduced and points for attention in the course of extrusion mould design and manufacture presented.
介绍了PV C装饰板的成型工艺，指出了挤出模具设计与制造过程中要注意的问题。
The general design principle of gas-assisted injection mould design is discussed. The working principle and selection method of gas pins are introduced.
阐述了气体辅助注射模具设计的一般原则，介绍了气针的工作原理和选择方法。
The general design principle of gas-assisted injection mould design is discussed. The working principle and selection method of gas pins are introduced.
阐述了气体辅助注射模具设计的一般原则，介绍了气针的工作原理和选择方法。
应用推荐