Worn crankcase piston rod seals.
曲轴箱连杆密封件损坏。
把活塞杆移开。
So how does the piston rod to be plated?
那么活塞杆是如何进行电镀的呢？
Burnished 303 stainless steel piston rod.
温润303不锈钢活塞杆。
The piston is connected with a piston rod.
活塞与活塞杆连接。
Replace piston rod and add flow passage on piston rod.
更换活塞杆，在活塞杆上增设流道。
This will result in the fatigue fracture of the piston rod.
这样活塞杆就会产生疲劳断裂。
Dye-penetrant testing of the disc trunnions and piston rod heads.
对阀盘、耳轴活塞杆头的染料渗透剂测试。
The orientation of the lip and the direction of the piston rod are same.
所述唇边的朝向与活塞杆的方向相同。
So stainless steel piston rod after finishing processing, still need to electroplating?
那么不锈钢活塞杆在完成加工后，还需要电镀吗？
The invented stopper is composed of slide oil cylinder, piston rod units and outer housing.
一种铁路全液压制动顶，由滑动油缸，活塞杆组件，及外壳组成。
The locking sleeve is provided with an adjusting device automatically aligning the piston rod.
所述止动套设有对活塞杆自动找正的调节装置。
It's typical lip seal, which is able to gain good seal effect no matter in piston or piston rod.
U型圈是液压缸中最常用的油封，它是一种典型的唇口密封件，无论用于活塞还是活塞杆都能获得良好的密封效果。
An oscillating lever connected to an engine piston rod and used to transmit power to the crankshaft.
传动杆：可摆动的杠杆，与引擎之活塞相连，用以向机轴传送能量。
This offered the basis for designing the section reasonably and analysing the failure of piston rod.
为合理设计活塞杆的截面及研究活塞杆的断裂因素，提供了依据。
After the piston rod of the cylinder is in complete contraction, slip blocks are totally fallen down.
当油缸活塞杆完全收缩后，滑移座也完全落下。
When the motor stops, the piston rod can self-lock at any locations, in the state of pressure keeping.
电机停止，活塞杆能自锁在任意位置上，处于保压状态。
As the piston descended, a ratchet engaged the piston rod and engine shaft and thus power was transmitted.
当活塞下行时，棘轮连接活塞杆和发动机轴，因此将功率输送出去。
The piston rod of family sedan's rear snubber fractured duringearlier stage of rotary bending fatigue test.
家轿后减振器活塞杆在进行旋转弯曲疲劳试验时出现早期断裂。
The airtight function of chromium plating for piston rod is a knotty technical problem for aircraft factories.
活塞杆镀铬层的气密性问题，是航空工厂长期存在的一个老大难问题。
A hydraulic lock is installed on the vertical leg cylinder to avoid extending of the leg piston rod in operation.
在支腿垂直油缸上装有液压锁，能可靠地防止行驶时支腿活塞杆伸出。
After the stainless steel piston rod is complete, it is necessary to inspect the quality and size of the coating.
在不锈钢活塞杆完成电镀后，还需要对镀层的质量、尺寸等进行全方面的检查。
In general, stainless steel piston rod plating, generally require the use of at least 3 times the chromium plating.
总的来说，不锈钢活塞杆的电镀，一般都需要采用至少3次的镀铬。
The type of surface finish applied to the rod determines to a great extent the corrosion resistance of the piston rod.
此种表面防护层的应用，使得活塞杆具有相当的耐腐蚀性。
The fracture of piston rod of new hydrogen compression pump is studied by metallography and electron probe in this paper.
用金相显微镜和电子探针对新氢压缩机活塞杆断口进行了分析。
Apply to reciprocating motion of hydraulic cylinder piston rod sealed device can also be used to cover the static flange seal.
适用于液压缸活塞杆往复运动用密封装置，也可用于法兰端盖的静密封装置。
When the piston is moved by the pressurized fluid, the piston rod imparts a force or moves an object through a desired distance.
当活塞由高压流体驱动时，活塞杆传递力，推动负载移动一段设定的距离。
The steering engine is steered through the position of the cylinder on the piston rod which is controlled by hydraulic pressure.
利用油压控制油缸在活塞杆上移动的位置进行操舵。
The problems such as overheat and blackening of the piston rod are solved by means of improving the composition of packing in the sealing box.
通过改进密封函填料配方解决了活塞杆过热发黑的问题。
Each end of the piston rod, before and after the need to go through grinding, electroplating, polishing... and other multi-channel processing.
每个成品的活塞杆，前后都需要经过研磨、电镀、抛光……等多道加工工序。
应用推荐