Plasma spraying technology is widely used to modify the surface of biomedical materials, such as titanium and its alloys.
等离子喷涂是一种常用的生物医用材料表面改性技术,被广泛应用于钛等金属人工骨的表面改性。
These layers are applied by flame or plasma spraying.
这些层已采用火焰或等离子喷涂。
The designing parameters of high frequency transformer and the protecting IGBT in plasma spraying inverter with high voltage and large current is analyzed in this paper.
分析了等离子喷涂逆变器在高电压大电流条件下,高频变压器参数设计和IGBT保护问题。
It also points out the matters needed to study, and exhibits the bright applied future of plasma spraying.
并提出需要研究的问题,展示了等离子喷涂更加广阔的应用前景。
The microstructure of zirconia coating deposited by plasma spraying technique was studied by means of FESEM, SEM, TEM and XRD.
利用透射电镜(TEM)、扫描电镜(sem)和X射线衍射仪(XRD)等分析技术,表征了等离子喷涂氧化锆涂层的显微结构。
The properties of the composite powders obtained were determined and the plasma spraying experiments were carried out to examine the properties of coating layers.
测定了所获得复合粉末的性能,进行了等离子喷涂试验,检查了涂层的性能。
Technical problems to which due attention should be paid in applications of the ceramic powder plasma spraying technique were expounded in this paper through practical examples.
通过实例,阐述了等离子喷涂陶瓷粉末技术应用中应注意的技术问题。
A plasma spraying welding robotic system using for repairing easily worn off parts assembled in dredge equipment on ship is developed to make the operation automated.
本系统应用等离子喷焊工艺对工程船舶设备中的易损零件进行修复。
METHODS: The antibacterial hydroxyapatite coating material which contained silver-zirconium phosphate antimicrobial was prepared on the Ti implant by using vacuum plasma spraying technology.
方法:采用真空等离子喷涂技术,在钛基材表面制备含磷酸锆载银抗菌剂的抗菌羟基磷灰石涂层材料。
A review is given on the research progress in nanostructured ceramic coatings prepared by plasma spraying at home and abroad.
等离子喷涂纳米陶瓷涂层是目前纳米涂层领域的研究热点之一。
Thermal plasma spraying is one of the important technologies in modern surface engineering.
热等离子体喷涂技术是现代表面工程的重要手段之一。
Many studies were carried on the technologies and properties of laser cladding on the seal face of valve, but lack of contrast data with plasma spraying Alloy applied at present.
气门密封面激光熔覆的工艺和性能研究较多,但激光熔覆的合金组织和性能与现在气门密封面生产应用的等离子喷焊合金的对比数据较少。
The paper summarizes the characteristic, some application fields and composite process technology of plasma spraying.
综述了等离子喷涂的特点,以及涂层的一些应用领域及其复合处理技术。
Oxidation resistance coatings prepared by plasma spraying process on the surface of workpiece can improve oxidation resistance.
利用等离子喷涂技术在工件表面制备抗高温氧化涂层,能显著提高工件的抗氧化性能。
The spraying technology of plasma is a widely used hot spraying technology, accounting for more than 40% of the spraying craft.
等离子喷涂技术是一项应用极广的热喷涂技术,占喷涂工艺的40%以上。
A distributed control system is designed for plasma spraying equipment and the configurations of system's software and hardware are discussed.
针对等离子喷涂设备设计出分布式控制系统,介绍了等离子喷涂分布控制系统的软、硬件结构。
The basic experimental researches on rapid manufacturing moulds by plasma spraying have been carried out.
对等离子弧喷涂法快速制模技术进行了基础实验研究。
In this paper, the axial-fed plasma spraying gun was used to obtain ceramic coatings on steels. Its parameters, properties and microstructure were compared with those of a traditional one.
对比研究了新型轴向送粉等离子涂枪和普通等离子喷涂枪的喷涂工艺参数和制备涂层的性能及其组织。
The effects of the plasma power, spraying distance and plasma gas flow rate on the microstructure and properties of the coatings were investigated.
研究了电弧功率、喷涂距离和等离子气体流量对涂层显微组织和性能的影响。
The plasma spraying experiments were carried out using various argon-nitrogen volume mixture ratios, and the corresponding coatings were obtained.
采用了不同的氩氮体积混合比进行等离子喷涂实验 ,并获得相应条件下的涂层。
In this paper, the nano iron sulfide plasma spraying feedstocks were made by oneself and the nano self-lubricating coatings on the steel were fabricated by plasma spraying.
本研究利用自制的纳米尺寸的硫化亚铁颗粒作为等离子喷涂的喂料,在钢基体表面制成了纳米硫化亚铁自润滑涂层。
A plasma gun for spraying welding inside surface of deep hole with powder is designed and developed which has the property worked continuously at high temperature.
设计并研制了深内孔等离子弧粉末喷焊枪,该枪具有在高温下连续稳定工作的优异性能。
RESULTS AND CONCLUSION:The surface modification methods include plasma spraying, micro-arc oxidation, sol-gel and biomimetic methods.
结果与结论:在表面生物活性改性的方法中,主要有等离子体喷涂法、微弧氧化法、溶胶-凝胶法及生物仿生法等。
Self-lubricating wear resistant coating is prepared by plasma spraying using chromium carbide, nickel chrome, fluoride-metal, and silver composite materials.
采用碳化铬、镍铬合金、氟化物共晶体和银的复合粉末为原料,通过等离子体喷涂方法制备高温耐磨自润滑涂层。
The up-to-date techniques of thermal spraying, e. g. low voltage plasma spraying, supersonic flame spraying, laser spraying, laser treatment of coatings, nondestructive inspection for coatings...
对于热喷涂的最新技术如低压等离子喷涂,高超音速火焰喷涂、激光喷涂,涂层激光处理,涂层的无损检验也作了说明。
The up-to-date techniques of thermal spraying, e. g. low voltage plasma spraying, supersonic flame spraying, laser spraying, laser treatment of coatings, nondestructive inspection for coatings...
对于热喷涂的最新技术如低压等离子喷涂,高超音速火焰喷涂、激光喷涂,涂层激光处理,涂层的无损检验也作了说明。
应用推荐