The arrangement of the ribs has important effects on the rigidity of molded plastic part too.
加强筋的布置对注塑件的刚度也有重要影响。
A technical analysis was made on a plastic part used in the left and right wind outlet of Volkswagen cars.
对大众轿车左右出风口塑件进行了工艺分析，提出了合理的注射成型工艺。
The MPH (MDH) pump's plastic part is reinforced with fiberglass while that of MPH (MDH) -f with carbon fiber.
泵的塑料部件以玻璃纤维增强，MPH (MDH) -F泵的塑料部件以碳纤维增强。
With this mould automatic stripping of plastic part can be realized operation strength lowered, and production efficiency increased.
该模具可实现塑件自动卸料，降低了操作强度，提高了劳动生产率。
Injection molding is one of the key ways of thermoplasticity plastic molding which can mold precise plastic part with complex shape.
注射成型是热塑性塑料成型的主要方法之一，可以一次成型形状复杂的精密塑件。
When the load is removed, the elastic portion of the strain is recovered, but the plastic part (slip and creep) remains as permanent set.
当荷载被移走时，应变的弹性部分恢复，但塑性应变部分(滑移和徐变)却会永久呆留。
Expound the widely used mold structures of plastic part with thread, explain the requirements of these structures, the advantage and drawback.
指出常用螺纹脱模机构的应用条件及优缺点。
The concept and function of plastic part flow chart, and depicting method of flow chart for some basic geometrical objects are introduced respectively.
介绍了塑料零件流程图的概念、作用及一些基本几何体流程图的绘制方法。
Through an example, the key problems of the small precise thin-thickness plastic part molding in injection mold were discussed. The solution was put forward.
结合一个例子探讨了小型精密薄壁塑件成型模具设计中的一些关键性问题，并提出了一些可行的方法。
An ejection system was designed in the side core_pulling mechanism to improve the moulding quality and avoid deformation of the plastic part during demoulding.
在侧抽芯机构中设计出一种顶出机构，改善塑件的成型质量，防止塑件脱模时的变形。
Having 5 years or above plastic part design experience and at least 3 years project management experience. One also having metal pars design experience will be more preferred.
至少5年以上塑胶件设计经验和至少3年以上项目管理经验。如果还有五金件设计经验者优先。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
通过对塑件工艺分析的人工神经网络模拟，建立了可供工艺优化计算的数学模型。
The injection machine pushed the knockout plate, and then the knockout plate drove the threaded rod, resulting in the rotation of the threaded core and the auto_demoulding of the plastic part.
模具的特点在于利用注塑机顶出动作，由推板驱动螺杆，经齿轮传动使螺纹型芯旋转，塑件自动脱出。
Based on the analysis of the technological characteristics of the plastic part, a compression model die structure was designed. The die characteristics and the operating process were discussed.
分析了塑件的工艺性，设计了新型的压模结构，论述了模具特点和工作过程。
Moulding technology of specular seat is analyzed and the injection mold of this plastic part gets designed furthermore working process and key points of die design and manufacture are provided.
分析了镜座的成型工艺，设计了该塑件的注射模，并介绍了该模具的工作过程和模具的设计与制造要点。
Moulding technology of specular seat is analyzed and the injection mold of this plastic part gets designed furthermore working process and key points of die design and manufacture are provided.
分析了镜座的成型工艺，设计了该塑件的注射模，并介绍了该模具的工作过程和模具的设计与制造要点。
应用推荐