Cover the hole with the plastic sheet.
用塑料薄片把洞盖上。
Next, you can cover the hole with the plastic sheet, securing the edges of the plastic with dirt.
接下来，用塑料薄膜封住洞口，并用泥土固定住塑料膜边缘。
Lunch was spread out on a long plastic sheet.
午饭就摊在一个长塑料单上。
Their answer is to get rid of the plastic sheet.
他们的方法就是除去塑料片。
Ligeia prepared a fine plastic sheet for the picnic.
莉吉为野餐准备了一条结实的塑料单。
A plastic sheet that can be colored on and then wiped clean.
一个塑料板。这是用来涂颜色的，并且容易擦拭干净。
We also own processing based on the PETG plastic sheet products.
我们还自行加工基于PETG板材的吸塑制品。
They now live under a plastic sheet held up by some rescued furniture.
他们现在住在由一些营救的家俱所支撑的一个塑料片下面。
A plastic sheet was pegged down over the compost heap to hasten decomposition.
把塑料布覆盖在肥堆上，并用木桩固定好，以加速肥料的分解。
In this way he can print as many of the fuel cells as he needs onto a plastic sheet.
他能用这种方法把他所需要的所有燃料电池都引在一块塑料板上。
A plastic sheet is printed with bold black lines and then placed under an infrared lamp.
把一张印着粗黑线的塑料纸放在红外线灯下。
NOTES: Modern automotive windshields contain a thin plastic sheet between two layers of glass.
注意：新一代的汽车前挡玻璃是以两片玻璃中间夹著一层薄薄的塑胶膜而成。
An electrically-sensitive transparent material is deposited on glass or a plastic sheet that covers the panel.
把一种涂有对电很敏感的透明材料的玻璃或塑胶薄片覆盖在太阳能板上。
It is found that the method of production of plastic sheet has influence on uniformity of tensile performance.
本文认为塑料片材的生产方式对其拉伸性能的均匀性有影响。
Two techniques during the construction are introduced including ZY over-long structure without joint and complex plastic sheet.
并介绍施工中采用的ZY及超长结构不设缝工艺和复合塑料防水板工艺。
Plastic principle: the flat plastic sheet heating soft, using vacuum adsorption in the surface of the die, formed after cooling.
吸塑原理：将平展的塑料硬片材加热变软后，采用真空吸附于模具表面，冷却后成型。
According to technical requirements of filming plastic sheet for leakproof saline, a soil cutting and throwing device was developed.
根据盐田防渗塑膜铺底所需覆土量的技术要求，设计了盐田防渗塑膜铺底专机(简称：盐田铺膜机)的切抛土部件。
The area of the ulceration was copied on a transparent plastic sheet and the relative integral was recorded in a computerized system.
溃疡区域用一个透明塑料布来测量它的大小，在计算机上记录相对大小。
They successfully constructed a prototype of a bag made from a number of stainless steel plates, stuck on to a light, flexible plastic sheet.
他们成功的制造了利用轻质可伸缩塑料片连接的不锈钢袋子原型。
Put the lid on. Cover the container with a big plastic sheet and tie it closed with some string or twine around the middle of the container.
盖上盖子。用大塑料布盖住容器，并用绳子将塑料布固定在容器上。
Concrete structure strengthened with carbon fiber reinforced plastic sheet (CFS) is a new retrofit method in the field of civil engineering.
碳素纤维布加固混凝土结构是一种新型结构加固方法。
Concrete structures strengthened with carbon fiber reinforced plastic sheet (CFS) is a new retrofit method in the field of civil engineering.
碳纤维布加固混凝土结构是一种新型结构加固方法。
This product is mainly used to produce tires, plastic sheet, rigid plastic, and thick-walled rubber products, is a universal basic additives.
本品主要用于制造轮胎、胶板、硬质胶和厚壁橡胶制品，是一种通用的基本助剂。
An electrically-sensitive transparent material is deposited on glass or a plastic sheet that covers the panel. Sensors monitor the dust levels.
在覆盖电池板的玻璃或塑料片上沉积一种电敏透明材料，传感器监测灰尘等级，当灰尘达到额定等级时，系统发生作用，利用电池板所发电流产生一个电荷。
The dots, composed of a semiconductor called indium phosphide, are sprayed onto a transparent plastic sheet that is then covered with a second sheet.
这些微晶是一种叫作磷化铟的半导体化合物，它们被喷撒在一张透明塑料薄片上，然后用另一张薄片盖好。
Plastic sheet can be widely used in many fields, such as chemical, architecture, and its applications in many new fields are constantly increased.
塑料板材广泛应用于化工、建筑等领域，在许多新领域中的需求也在不断增加。
E ink's flexible displays combine a thin stainless steel foil transistor substrate with electronic-ink display material that is coated on a plastic sheet.
EInk的弹性显示器以一薄层不锈钢箔晶体管为基层，结合涂覆电子墨水显示材料的一片塑料基材。
This full-automatic forming equipment for thermoforming plastic sheet includes feeding, heating, forming, cooling, mold unloading, cutting at one blow.
本产品是以送片、加热、成型、冷却、脱模、切断一次性完成的全自动、高效塑料片材成型设备。
This full-automatic forming equipment for thermoforming plastic sheet includes feeding, heating, forming, cooling, mold unloading, cutting at one blow.
本产品是以送片、加热、成型、冷却、脱模、切断一次性完成的全自动、高效塑料片材成型设备。
应用推荐