The heart of any pneumatic system is the air compressor.
气动系统的动力源是空气压缩机。
Good knowledge and experience of hydraulic and pneumatic system.
有丰富的液压气动知识和实践经验。
The model was linearized for the qualitative analysis of the pneumatic system.
为便于进行定性分析，对该数学模型进行了线性化处理。
The utility model relates to a compressed air muffler used for a pneumatic system.
涉及一种用于气动系统的压缩空气消声器。
The automatic cleaning and dust-absorption pneumatic system prevent dust pollutions.
设备设有自动清尘和吸尘气动系统，无粉尘污染。
Electromagnetic valve of pneumatic system adopts conflux boards so as to reduce space.
气动系统电磁换向阀采用汇流板集装方式，减少了占用空间；
And the designing method has universal significance for optimal design of pneumatic system.
这种方法对气动系统的优化设计具有普遍意义。
The pneumatic system controls the temperature and the pressure of engine bleed air source.
增压引气控制发动机引气的温度和压力。
Electrical control system: electrical control cabinet, sub control station and pneumatic system.
电控系统：电气控制柜，分站及气动系统。
Adjustment for upper corrugating roller, pressure roller, and glue roller, is controlled by pneumatic system.
上瓦楞辊、压力辊及上浆辊升降以气压控制。
World famous brand pneumatic elements are adopted which make the pneumatic system works with high reliability.
采用国际名牌气动元件，气动系统稳定可靠。
Work with NPD manufacturing engineer on line setup, specially on power supply, pneumatic system and ESD system.
和新产品导入工程师一起完成生产线的布局建立，特别是电，气和防静电系统。
And basic design technique of pneumatic system of Automotive welding line is discussed combined with the practice.
结合实践，探讨了汽车焊装线气动系统的基本设计技术。
The design of pneumatic system and CAT system for integrative test stand are systematically presented in the paper.
本文较系统地介绍了测试台气动系统和CAT系统的设计。
The pneumatic system of the brake system consists of four air circuits according to the brake function requirements.
根据该制动器的功能要求，所研制的该制动方式的气路系统由四条气路组成。
It USES the high power IGBT high frequency equipment to provide heating power and the pneumatic system as the drive.
采用大功率IGBT高频设备作为加热电源，气压系统作为动力。
The machinery structure, pneumatic system, PLC controller system of pneumatic materiel conveying system were introduced.
介绍了采用气动元件的物料搬运系统的结构、气动系统及其PLC控制系统。
The working principle and the pneumatic system of this equipment were introduced. The pneumatic chart was also presented.
对该设备的工作原理和气动系统作了详细的介绍并给出了气路图。
The content of the paper can give some refernce for the research of the internal condensation of vapor in pneumatic system.
文章的研究为气动系统结露现象的内部结露研究提供了理论依据。
Design the principle of the pneumatic system of automatic work-piece carrying mechanism of the precise straightening press.
设计了精校机自动送料机构气动系统原理图，并进行了系统的设计计算和气动元件的选择。
The successful and effective operation of pneumatic system depends primarily on the appropriate selection of feeding device.
应用气力输送技术输送物料的成功并有效运转与否，首先取决于选定的供料装置是否恰当。
Air CLEANER, a component in the pneumatic system for removing dirt from the engine air supply to the air conditioning system.
空气清洁器，气源系统里的一个部件。用于去除供空调系统使用的发动机引气中的灰尘。
Air CLEANER, a component in the pneumatic system for removing dirt from the engine air supply to the air conditioning system.
气源系统里的一个部件。用于去除供空调系统使用的发动机引气中的灰尘。空气清洁器。
BLEED valve, a valve in the pneumatic system for air supply from the engine or auxiliary power unit to the pneumatic manifold.
引气活门，气源系统内，使来自发动机或辅助动力装置的空气进人气源支管的活门。
This essay describes the defects of pneumatic system of new anode furnace driving unit used in Guixi Smelter and how to solve these defects.
前言：本文叙述了贵溪冶炼厂新阳极炉驱动装置气动系统存在的缺陷及改进措施。
According to the technique request of pulp-mold produce line, the pneumatic system has been analyzed by the way of signal-action state graph.
根据全自动纸浆模塑生产线的工艺要求，采用信号—动作状态图法对气动系统进行分析与设计。
It adopts pneumatic system and special mechanism. It has features of high precise, no dislocation, faultless, easy maintenance and high efficiency.
采用气动控制系统和独特的机械结构，具有组角准确，不错位，故障点少，易维护维修，加工效率高等特点。
Pneumatic cylinders may not retain steady motion when driven at low speed because of the stick-slip which decreases the accuracy of the pneumatic system.
由于爬行现象的影响，气缸在低速驱动时不能保持平滑的运动状态，降低了气动系统的控制精度。
Pneumatic cylinders may not retain steady motion when driven at low speed because of the stick-slip which decreases the accuracy of the pneumatic system.
由于爬行现象的影响，气缸在低速驱动时不能保持平滑的运动状态，降低了气动系统的控制精度。
应用推荐