Electrohydraulic control unit whose performance has direct effect on rudder's characteristics is the key component of ship rudder position control system.
电液控制单元是船用舵机电液位置伺服系统关键部件，其性能的优劣直接影响舵机的性能。
Chapter three is concentrated on position control system identification.
第三章主要讨论位置控制系统的辨识。
Precise forging machine control system belongs to automatic position control system.
精锻机控制系统属于位置自动控制系统。
This graduation project topic is based on the PLC fluid position control system design.
本次毕业设计的课题是基于PLC的液位控制系统的设计。
Mechanism characteristics and position control system of a heavy and medium plate mill are introduced.
介绍了某中厚板厂轧机的机械特性及位置控制系统。
The controller for swash plate of aircraft inlet is a typical hydraulic serve position control system.
飞机进气道斜板控制系统是一种典型的电液位置伺服系统。
The experiment shows hat the position control system has ideal performance and simple algorithm suitable for real-time control.
实验表明，构建的位置控制系统具有理想的性能，且由于算法简捷，适合于实时控制。
This paper introduced a position control system method that used the digital and electronical technique to improve the old type panel saw .
介绍了一种利用数字电子技术改造老式裁板锯机位置控制系统的方法。
This paper introduced the constitution and specific design of robot with six DOF and researched the position control system of single joint of robot.
本文主要阐述了六自由度机械手本体的总体构成及其具体的结构设计，并对机械手单关节位置伺服系统进行了研究。
From the angles of mechanism and control, the functions, structure and characteristics of hydraulic position control system of a factory are introduced.
从机械和控制的角度介绍了某厂液压位置控制系统的功能、结构和特点。
As to demands of automatic position control system, a model of system mathematics was set up. Control algorithm of precise forging machine orientation is studied.
针对位置自动控制系统的要求，建立了系统数学模型，研究了精锻机控制系统的定位控制算法。
The technology was applied to fault diagnosis of a satellite position control system, and the result proved that the diagnosis efficiency and accuracy was increased.
把此技术应用在了卫星姿控系统的故障诊断中，结果表明提高了诊断效率和诊断的正确率。
In chapter 4 we stress the application of fuzzy adaptive PID controller which combines fuzzy control and PID control technology in cutting line position control system.
其中在第四章重点论述了模糊控制方法与PID控制技术相结合的模糊自适应PID控制器在剪切线位置控制系统中的应用。
A two-folded sliding modes approach of pneumatic muscle actuator (PMA) position control system was proposed, and the controller was designed by using Lyapunov stability theory.
针对气动人工肌肉位置控制系统，提出了两层滑模的变结构鲁棒控制策略，控制器的推导基于李亚普诺夫稳定性理论。
By the detection result, the adjuster's parameter of position control system can be online regulated automatically, and excellent position response performance can be achieved.
通过检测结果，位置控制系统可以实施控制参数的在线自动调整，以保证控制对象获得优异的位置响应性能。
In order to overcome the influence of this negative factor on electro-hydraulic position control system, more and more scholars have begun to pay attention to the controller study.
为了克服这种不利因素对于电液伺服控制系统的影响，越来越多的学者开始关注对控制器的研究。
In view of the weak nonlinearity and time-delay characteristics of AMT clutch engagement position control system, DMC-PID cascade predictive control algorithm is applied to the system.
针对AMT离合器接合位置控制系统具有的时滞弱非线性特性，采用DMC-PID串级预测控制算法应用于该系统。
Based on the theory of magnetorheological pneumatic control technology, a new type of pneumatic position control system was constructed and its power-mechanism mathematics model was modeled.
本文根据磁流变气动控制技术，构建了新型的磁流变气动位置控制系统，建立了其动力机构的数学模型。
To satisfy high requirements for position follow accurateness and location precision of ac servo system at present. This paper researches and develops ac servo position control system based on DSP.
为了满足当前交流伺服位置跟随精度和定位精度高的要求，本文研究并开发了基于DSP的交流伺服位置控制系统。
Through a rational derivation, nonlinear mathematical model of electro-hydraulic position control system is built up. The system dynamic and stability analysis is obtained with the use of the model.
通过合理的推导，建立了电液伺服位置控制系统的非线性数学模型，利用该模型对系统进行相关的动态和稳定性分析。
It is suggested in this paper that a kind of contact-free circuit for comparison and control should substitute for the conventional contact one in the back-forth wrapper web position control system.
提出在卷筒包装纸进退式光电定位系统中，采用无触点（全电子式）比较判别及控制电路，替代目前常用的触．点式同类电路。
As an important component of control field, hydraulic serve position control system with big power, rapid reflection and high accuracy characteristics, is being used widely in many industrial fields.
电液位置伺服系统是控制领域中一个重要的组成部分，具有功率大、响应快、精度高等特点，在国民经济的各个领域得到了广泛的应用。
To satisfy high requirements for position follow accurateness and location precision of robot system, this paper sets up F2812 DSP-Based robot position Control system.
为了满足机器人位置跟随精度和定位精度高的要求，建立了基于F2812DSP的机器人位置控制系统。
Investigates a method for increasing the positioning accuracy of electric APC (auto position control) system for plate mill while assuring its positioning speed.
研究在保证中板轧机电动APC(自动位置控制)系统定位速度的同时提高定位精度的方法。
Investigates a method for increasing the positioning accuracy of electric APC (auto position control) system for plate mill while assuring its positioning speed.
研究在保证中板轧机电动APC(自动位置控制)系统定位速度的同时提高定位精度的方法。
应用推荐