Effect of melamine derivative as pungent odorless formaldehyde donor on bonding properties of adhesive was also described.
文章还介绍了蜜胺衍生物作为无刺激性气味的甲醛给予体对粘接性能的影响。
The method and adhesive process for Sodium-Naphthalene solution activating Polytetrafluorethylene (PTFE) surface were described, and the properties of adhesive were tested.
叙述了钠—萘溶液活化聚四氟乙烯表面的方法和粘接工艺，并测试了粘接件的主要性能。
The method preparation of finishing adhesive was studied. The effects of different amount of thickening agent, AA and initiator on the properties of adhesive were discussed.
研究了装演复膜胶的制备方法，探讨了引发剂用量与转化率的关系及AA用量、不同增粘树脂对粘接性能的影响。
The influence of the kinds of epoxy resin, the proportion of composite curing agent , and the content of accelerant on the adhesive strength and heat resistant properties of adhesive were discussed.
重点讨论了环氧树脂种类、复配合固化剂比例以及促进剂用量对胶粘剂粘接强度和耐热性能的影响。
With the natural adhesive properties of skin removed, the magnetism either works-or it doesn't.
如果皮肤的自然粘合性移走，磁性也应该起作用——否则就不具有磁性。
Formula, Preparation and properties of poisonousless and Quick drying adhesive used for decroate are described.
介绍了装饰用无毒快干胶粘剂的配方、制备方法及其性能。
The formulation, preparation technology and properties of neoprene adhesive for spraying are described in brief.
本文简述了一种用于喷涂的氯丁胶粘剂配方，制备工艺及性能。
The abrasion properties of wear-resistant adhesive coatings have been studied on self-created abrasion test facility.
利用自制冲蚀磨损试验装置，研究了耐磨胶粘涂层气固冲蚀磨损的特性。
Wood floor adhesives should have properties of highly adhesive strength and good durability, water resistance and impact resistance.
木地板粘结剂应具有足够的粘结强度和良好耐久性、耐水性和抗冲击性能。
The formulation, preparation, technology and properties of a spray neoprene adhesive are described in brief.
简述了一种用于喷涂的氯丁密封胶配方、制备工艺及性能。
This paper introduces the preparation, the properties of the adhesive and the selection of its working conditions.
文中介绍了该胶的制备方法和性能以及操作条件的选择等。
The formulation, physical properties and bonding strength of Adhesive DK-2 are described in this per.
本文叙述了DK-2抗磨胶粘剂的配方、物理性能和粘接强度。
Composition, formulation, properties and results of on-site application of the adhesive is described.
介绍了该胶的组成、配制方法、性能及现场应用的效果。
The paper also studies the properties of Al peelable shim and the stability of the adhesive.
并测试了铝可剥离垫片的各种性能及胶粘剂的稳定性能。
The effect of PVB structure, proportion of PVB and modifying resin and solvent type on adhesive properties was investigated.
对于PVB的结构、PVB与改性树脂的配比、以及溶剂的选择对胶粘剂性能的影响进行了研究。
This paper presents the chemical composition, properties and application of SY-P1A foam adhesive developed in BIAM, which can be used high temperature structural adhesive.
P1A是一种高温使用的结构发泡胶粘剂，本文介绍了这种胶的研制过程、综合性能及其应用情况。
The wear properties of antiwear adhesive coatings under solid particle erosion and slurry erosion condition were studied in this paper.
本文对气固冲蚀和浆体冲蚀条件下耐磨环氧胶粘涂层的磨损特性进行了研究。
The transmittance of smoke signal at high temperature and the bonding and technical properties of the adhesive were tested.
测试了该胶粘剂试样在高温状态下产生的烟雾信号的透过率以及常温粘接强度和工艺性能。
Besides, the formula of the adhesive was discussed and its properties were characterized.
讨论了该胶粘剂的配方并表征了该胶粘剂的性能。
This paper concisely introduced the effects of the choice of curing agent, the flexibilizer quality and the active filler on the mechanical properties of the adhesive.
简要介绍了固化剂的选择、不同增韧剂的优劣及活性填料等材料对胶粘剂力学性能的影响。
Composition, properties, and application of J-671 adhesive for automobile brake were introduced. Its cure mechanism was investigated.
介绍了J- 671汽车刹车片胶粘剂的组成、性能、应用，并对该胶粘剂的固化机理进行了研究。
The formulation, preparation technique and properties of the novel casein adhesive which using casein as the raw materials for interleaving aluminum foil paper are introduced in the paper.
介绍了一种以干酪素为主要原料研制的铝箔衬纸胶粘剂的配方、制备工艺及技术性能。
Besides the applications, classifications and properties of the structural foaming adhesive, the paper emphatically introduces its present developments at home and abroad.
概述了泡沫结构胶粘剂的应用、分类及性能，着重介绍了泡沫结构胶的国内外现状。
Preparation of phenolic aldehyde-epoxy structural adhesive was elaborated and the factors which effect the properties of this adhesive were primarily discussed.
论述了酚醛-环氧结构胶粘剂的制备原理及工艺，讨论了影响酚醛-环氧结构胶粘剂的性能因素。
The properties of paint and adhesive prepared from phenolic residuum resin are better than those from phenolic resin.
用酚渣油制备的涂料和胶粘剂的性能优于酚醛树脂。
In this paper, the preparation technique and properties of high speed casein labeling adhesive with super water resistant were introduced.
介绍一种强耐水贴标胶的制备方法，考察了助分散剂、交联剂、淀粉以及碱等原料对酪素胶性能的影响。
Properties, Production and application of 305 building decoration adhesive are presented.
介绍了305建筑装饰胶粘剂的性能、生产和应用。
Influences of quantity of phenolic resin, the kind of the solvents and the time of mastication of the rubber on the properties of the adhesive were discussed.
讨论了酚醛树脂含量、溶剂及橡胶的塑炼时间对胶粘剂性能的影响。
The results showed that dynamic mechanical and adhesive properties of TIPN prepared by conventional radical polymerization were worse than those of ATRP.
结果表明，采用A TRP法制备的TIPN的动态力学性能和黏结性能均优于常规自由基聚合制备的TIPN。
The results showed that dynamic mechanical and adhesive properties of TIPN prepared by conventional radical polymerization were worse than those of ATRP.
结果表明，采用A TRP法制备的TIPN的动态力学性能和黏结性能均优于常规自由基聚合制备的TIPN。
应用推荐