Level ride rear suspension helps to maintain good road manners even with a full load.
平液后悬挂可保证即使满载情况下也能保持良好的公路性能。
Rear suspension system under light load has higher supporting frequency than under deadweight.
而后悬架系统在轻载荷下较之重载荷时具有较高的支承频率。
It also has a front and rear suspension for a more comfortable biking experience even on a rough road.
它还拥有一个前方和后方悬挂的一个更舒适的骑车经验，即使在崎岖道路。
I had a big shunt again that same year at Suzuka, when the rear suspension broke and I went into the tyre wall.
在同年的铃鹿我再一次逃过了一截，那时后悬挂断了，撞向了轮胎墙。
Positions 3 to 5 increase spring preload for a stiffer rear suspension, and can be used when the motorcycle is more heavily loaded.
岗位3日至5日增加弹簧预紧一项更为严厉的后悬挂系统，可以用来当摩托车是越来越重装货。
The rear suspension , derived from the hatchback, consists of a torsion-beam, two rear suspension arms and an integral anti-roll bar.
该悬架，从掀背式，共分一个扭束，两个悬架武器和不可分割的防滚棒。
This paper presents the repair of rear suspension for HINO TOKYU TLE trailer, the substitution and remaking methods of its spare parts.
介绍了日本日野tokyu、TLE型挂车后悬架修理、配件代用加工及改进方法。
We have an empirical knowledge that the rear suspension should have a higher spring rate than front one, in order to reduce pitching motion.
为了减少俯仰运动，后悬架应该比前悬架有较高的弹簧刚度。
The structure can increase the dynamic travel of a rear suspension frame and reduce the height from the upper surface of the frame to the ground.
本实用新型的这种结构可增加后悬架的动行程，降低车架上表面离地高度。
The engine is a stressed component within the car, bolting to the carbon fibre 'tub' and having the transmission and rear suspension bolted to it in turn.
引擎是赛车上最重要的部件，与碳纤维的“盆”闩锁在一起，并依次连接变速器和齿轮。
The principle of laser detecting technology was introduced while detecting toe and camber angle of wheels during rear suspension subpackage process of M6.
阐述了马自达M6轿车后悬架分装过程中， 对其车轮的外倾和前束进行激光检测的原理及应用。
For example, you can consider a longer rear suspension beams in the middle of Okanagan disconnect, between about 2 can be connected with a flexible hinge.
例如，可以考虑将后悬架中那根较长的横梁中间断开，左右两根之间就可以用一个柔性铰连接。
The results show that the research program improves design efficiency of the rear suspension structure, optimizes the structure of parts and reduces costs.
结果表明本研究方案提高了后悬架结构的设计效率，优化了零部件的结构，降低了成本，也为其它机械产品的研制和开发提供了一种手段。
But there's an all new double wishbone rear suspension set-up to offset this, with much less intrusion into the load area than the previous strut configuration.
但有一个全新的双叉骨后悬挂的设定，来抵消这种与低得多侵入负荷面积比前麦弗配置。
Secondly, the actuator prototype is designed based on the rear suspension structure of a typical passenger car with consideration of actual structure and work characteristics.
其次，以一个典型的轿车后悬架为例，考虑其实际结构要求及工况，设计了电机作动器原理样机。
We had a new rear suspension for Hungary but unfortunately we couldn't rig test it before because of lack of time and in these two weeks we could see that there was a big margin for improvement.
在匈牙利我们在尾部有个新部件，但很不幸之前我们没有能够测试他因为时间不够，在这两周中我们了解到还有很大的进步空间。
In the light of the poor anti-dive and anti-lift performances of a certain SUV, virtual prototype models of its front and rear suspension systems were built using the virtual prototype technique.
针对某SUV车抗点头和抗抬头性能较差，运用虚拟样机技术，建立其前后悬架虚拟样机模型。
Perfect suspension Balance Front-to-Rear Since ABP allows the rear suspension to work efficiently in both braking and non-braking situations, the front and rear shocks can work together all the time.
由前到后的完美避震平衡由于ABP允许后避震系统在制动和非制动情况下高效率地运行，任何情况下前后冲击均会同时发生。
Calm walk, extended trot, with a good front suspension and a powerful rear propelling.
平静的步行，小跑扩展，具有良好的前悬架和一个强大的后方推进。
Overall suspension action is extremely smooth due to a friction-reducing Kashima Coat treatment on the inside surfaces of the outer fork tubes and the rear shock reservoir.
全部暂停行动是非常平稳由于减摩涂层对鹿岛外叉管内表面和水库的避震器治疗。
They include a wider track front and rear, suspension knuckles that lower the roll center, larger anti-roll bars, and revised bushings and shocks.
这些措施包括更广泛的轨道前方和后方，暂停关节，降低轧辊中心，大型防倾杆，并修订衬套和冲击。
The suspension, with double wishbones at both the front and rear, is optimized for a neutral self-steering response and maximum ease of control.
同在这两个前后双叉骨悬挂，是优化一个中立的自我转向反应和控制的最大方便。
A handling simulation multibody model of a midibus is built using ADAMS/VIEW after we consider the steer system, front and rear air suspension.
在详细的考虑转向机构、前后空气悬架、车身等部件的基础上，利用ADAMS/VIEW软件建立了某中型客车的操纵稳定性多体模型。
The suspension of the front wheels is more complicated than the suspension of the rear wheels.
前轮的悬架结构比后轮的悬架结构更为复杂。
A coordinated control scheme of 4ws and active suspension based on yaw rate tracking is proposed, which distributes the control force between front and rear active suspensions and hen.
提出了基于横摆率跟踪控制的4ws和主动悬架的协调控制方法，对前后轴主动悬架控制力进行了分配，提高了大侧向加速度时的横摆率响应。
By means of spectral analysis method, the problem of dynamic loads acting on the load-carring components of rear bogie suspension system of a truck is analysed in this paper.
本文采用功率谱分析法讨论了作用在三轴汽车平衡悬挂承载部件上的动载荷问题。
And the rear shock adopts new bottom linkage for optimum suspension characteristics.
与后方底部休克采用新的联系，以实现最佳的悬浮特性。
And the rear shock adopts new bottom linkage for optimum suspension characteristics.
与后方底部休克采用新的联系，以实现最佳的悬浮特性。
应用推荐