Squeeze flow between two parallel disks is considered for rigid-plastic materials with partial wall slip.
两平行刚性圆盘挤压理想刚塑性介质时,通常考虑圆盘与介质的界面之间存在部分滑移。
The strain distributions of four kinds of radial forging processes have been simulated by rigid-plastic FEM.
采用三维刚塑性有限元法对四种径向精锻变形道次的变形分布进行了数值模拟计算;
The constrained superplastic bulging process is investigated by a large rigid-plastic finite element method.
采用大变形刚塑性有限元法模拟超塑性材料轴对称锥形模约束胀形过程。
The improved mesh generator can be applied in initial mesh generation and remeshing for the rigid-plastic FE…
实例表明该方法适用性强,可以用于有限元网格的初始划分和网格重分。
We discuss the dynamics problems of ideal rigid-plastic material in the flow theory of plasticity in this paper.
本文讨论了塑性流动理论中的理想刚塑性材料的动力学问题。
The validity of the new model was examined by the bar rolling experiment and the 3D rigid-plastic FEM simulation.
为了验证新模型,进行了棒材轧制试验并且利用三维刚塑性有限元法对轧制过程进行了模拟。
The validity of the new model has been examined by the bar rolling experiment and the rigid-plastic FEM simulation.
为验证新模型,完成了棒材轧制试验,并且利用刚塑性有限元法对轧制过程进行了模拟。
In this paper, the preforming processes of 915kkd train wheels was simulated using rigid-plastic FEM software TFORM2.
采用刚塑性有限元模拟软件TFORM 2模拟了915kkd快速车轮的预成形过程。
Squeeze flow between two parallel disks is considered for small gaps for rigid-plastic material with partial wall slip.
研究了存在壁面滑移时两刚性圆盘间刚塑性介质的挤压流动。
The rigid-plastic model can be used to simulate the deformation behavior of the interface between two granular materials.
两种散粒体间的接触变形特性可通过刚塑性模型来描述。
Using the principle of virtual displacement and a rigid-plastic constitutive model, the stiffness matrix of the new contact element was deduced.
采用虚位移原理和刚塑性本构模型,推导了接触单元的刚度矩阵。
Three-dimensional rigid-plastic finite elements, elastic finite elements and influential function method for the analysis of deformation of rolls system are combined.
它耦合了三维刚塑性有限元法,弹性有限元法和计算辊系变形的影响函数方法。
According to the characteristic of hydroforming for rear axle housing, rigid-plastic material model is elected as tube blank material model process simulation analysis.
根据后桥壳液压胀形的特点,选择刚塑性材料模型进行模拟分析。
A 3d rigid-plastic FEM simulation coupled thermal model for TC4 titanium alloy by warm shear spinning is founded and the temperature boundary condition of heating by flame is applied.
针对TC 4钛合金锥形件建立了三维热力耦合有限元模型,在有限元模拟过程中叠加了火焰加热边界条件。
The model of cutting process is established based on the rigid-plastic FEM, and the transient stress distribution of cutting tool in cutting process is obtained through the simulation.
基于刚塑性有限元方法建立了切削加工过程仿真模型,通过模拟获得了切削加工过程中刀具应力的分布和变化情况。
The billet deformation behavior, the magnitude and distribution of effective strain and damage value were investigated by rigid-plastic finite element method during multi-axial compressions.
采用刚塑性有限元法研究了多轴压缩过程中的坯料变形行为、等效应变大小、分布以及损伤值。
A generalized variational principle involving conditions of the rigid-plastic interface and the discontinuous surface of a velocity field has been put forward for the mixed-boundary value problem.
提出了一个包括界面条件及间断面条件在内的混合边值问题的广义变分原理,建立了极限载荷乘子的变分解析公式。
This paper's main content is the Study of Fibre Rigid-Plastic Bolt (FRPB) and Timbering Parameter.
本文的主要研究内容为纤维硬塑锚杆及其支护参数的研究。
Some IOLs are rigid plastic and implanted through an incision that requires several stitches (sutures) to close.
一些人工晶体是刚性塑料的,植入之后需要对切口进行缝合。
The rigid plastic finite method is applied to deal with the new power spinning process of the counter roller spinning.
针对对轮旋压新工艺进行了刚塑性有限元分析。
Moreover, if the surface moves from the plastic region into the rigid region, the strain rate is continuous and equals to zero.
此外,当界面的运动方向是由塑性区向刚性区扩展时,界面上的应变率也将保持连续并等于零。
This paper reviews the reason and mechanism of polymer toughened by rigid particle and stresses on the mechanism of plastic deformation and crystalline shape change.
综述了刚性粒子增韧聚合物的由来及增韧机理。重点介绍了塑性形变理论及晶型转变理论。
The existence of rigid etch stop layer helped to reduce the thermal stress and plastic strain.
刚性蚀刻停止层的存在,有助于减少互连线的热应力和塑性应变。
Advances an improving rigid nonlinearity hardening approximate model of the constitutive relations using the traditional theory of plastic limit analysis.
应用传统的极限分析理论,对可简化为刚塑性的材料本构关系提出了一种改进的“刚性-非线性强化”近似模型。
Based on the rigid plastic constitutive equation of lead, the damping force model of lead extrusion damper was deduced from the even plastic deformation energy method.
本文根据铅的刚塑性本构关系,利用均匀塑性变形能法,推导了铅挤压阻尼器的阻尼力滞回模型。
Dynamic plastic response of a simply supported circular plate made of a rigid - perfectly plastic material under uniformly step Loading is investigated in this paper.
本文研究了理想刚塑性简支圆板在均布阶跃载荷作用下的塑性动力响应。
A distance sleeve in the main drive gear of LZ110 minicar has been improved by using a plastic sleeve instead of a rigid one, and it has been supported by test and calculation.
LZ110型汽车主传动器主动齿轮轴隔套改进设计时,采用了塑性套,并做了一些试验和计算。
This paper studies the bounding problems of the complete solution of limit analysis for a rigid-perfectly plastic medium, allowing for discontinuity of plastic flow.
本文研究了非连续流动场中,刚塑性介质极限分析完全解的界限问题。
This paper studies the bounding problems of the complete solution of limit analysis for a rigid-perfectly plastic medium, allowing for discontinuity of plastic flow.
本文研究了非连续流动场中,刚塑性介质极限分析完全解的界限问题。
应用推荐