The paper provides a scheme to control AC servo-motor using single chip-computer AT89C51, including hardware design and software design.
介绍了一种由at89c 51单片机控制交流伺服电机的系统方案，包括系统硬件设计和软件设计。
Servo motor has a long overload ability, have smaller rotary inertia and big plugging around moment.
伺服电机有较长的过载能力，有较小的转动惯量和大的堵转转矩。
Servo motor has small start frequency, can quickly from the lowest revolution accelerated to the rated speed.
伺服电机有很小的启动频率，能很快从最低转速加速到额定转速。
Can be connected with any servo motor around the world.
可适配全球任何一台伺服电动机。
Based on direct drive servo motor CNC bending machine technology is an emerging technology.
基于伺服电机直接驱动的折弯机数控技术则是一门新兴的技术。
From the lowest to the highest speed, speed servo motor can smooth running, torque ripple is small.
从最低转速到最高转速，伺服电机都能平滑运转，转矩波动小。
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
目前常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
Remove longitudinal interlock servo motor.
拆下纵向互锁伺服电机。
Standard configuration is sidle frequency conversion motor drive & dec optional configuration is servo motor drive.
标准配置横行变频马达驱动，可选购横行伺服马达驱动。
A servo motor accurately controls the fluid level in the tank.
伺服电机可精确控制箱中的液位。
Auto suction outlet system. Suction outlet controlled by servo motor precision, following the knife edge automatic adjustment.
吸风口由伺服电机精准控制，跟随边自动调整。
Servo motor has a long overload ability, have smaller inertia and the big plugging around moment.
伺服电机有较长的过载能力，有较小的转动惯量和大的堵转转矩。
A motion controller interchangeable for servo motor and step motor constructed by motion control chip PCL240AS is introduced.
提出一种用运动控制芯片PCL240AS构造的伺服电动机和步进电动机通用的运动控制器。
Servo motor control system Imported from Japan Panasonic, provide accurate displacement and speed control.
进口松下电机伺服控制系统，提供精确位移及速度控制。
The cam controller allows the AC servo motor to run at different speed for different angles, and to turn on and turn off twi.
设计的凸轮控制器可实现对AC伺服电动机进行分段变速控制以及凸轮一周中的两通两断的控制功能。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
Design a servo motor control system.
设计一种伺服电机控制系统。
In the meantime, by using an AC servo motor as the driving parts and based on the MPC02 motion control card, the open control system was formed.
同时采用交流伺服电机作为驱动元件，基于MPC02运动控制卡作为上位控制单元构建了开放式控制系统。
The exact rotor position is required while a permanent magnet brushless servo motor (PMBSM) is under commutation and control. Howere, position sensors have some fatal defects.
永磁无刷伺服电机的换相和控制都需要准确的转子位置信息，然而位置传感器有其难以克服的缺点。
This paper describes performance indexes, structure features, design method and experimental investigation of electrohydraulic servo motor with super-low-speed, wide speed control and high precision.
本文介绍了超低速、宽高速、高精度电液伺服马达的性能指标、结构特点、设计方法和试验研究。
The paper introduces the hardware and software design of an AC servo motor control card based on 80C196KC.
介绍自行研制的基于80C196KC单片机的交流伺服电机控制卡的硬件设计及其软件实现。
SVC(TND)SERIES single phase high precision full automatic ac voltage regulator composable of contact auto voltage regulator, servo motor automatic control circuit etc.
系列单相高精度全自动交流稳压器，由接触式自耦调压伺服式电动机、自动控制电路等组成。
From the lowest speed to the highest speed, servo motor can smooth running, torque ripple is small.
从最低转速到最高转速，伺服电机都能平滑运转，转矩波动小。
The dynamic hybrid, using a new type of mixer, servo motor control, speed adjustable, and the noise is very small.
选用动态混合时，采用新型混合器，伺服电机控制，转速可调，而且噪音很小。
The control system of the manipulator consists of servo motor control unit, motion control unit and top management unit.
机械臂的系统控制硬件主要包括伺服电机系统﹑控制单元﹑运动控制单元﹑上层管理单元。
In the past for a long time, step motor to take up a large market, but China is gradually replaced for servo motor.
在过去很长一段时间里，步进电机占很大的市场，但目前正逐步为伺服电机所取代。
The whole project design of the AC servo motor control system based on TMS320F2812 is introduced.
介绍了基于TMS320F2812交流伺服电机控制系统的整体方案设计。
Rotate frequency conversion regulating speed, drive servo motor or stepper motor, drive ball screw.
旋转变频调速，驱动伺服电机或步进电机，传动滚珠丝杆。猈。
Commonly used servo motor is ac servo motor, the motor shaft with in the photoelectric encoder, by detecting the rotor Angle to frequency conversion control.
常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
Commonly used servo motor is ac servo motor, the motor shaft with in the photoelectric encoder, by detecting the rotor Angle to frequency conversion control.
常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
应用推荐