Refrigerated container simulation chamber create a circumstance for simulate temperature and humidity condition outside the refrigeration container.
冷藏集装箱环境室模拟冷藏集装箱在运行环境中的外部温度和湿度条件。
This paper introduced the measure and control principle of refrigerated container simulation chamber, analyzed the composing of the closed loop control system.
本论文介绍了冷藏集装箱环境室测控系统原理，分析了闭环控制系统的构成。
Application of these technologies to refrigerated container simulation chamber can enhance management level, decrease labor intensity and achieve satisfactory economic and social benefits.
把这些技术综合应用于冷藏集装箱环境室测控系统，可以提高运行管理水平，并减少运行管理劳动强度，取得良好的经济效益和社会效益。
Combining with simulation of arc phenomena, a corresponding arc chamber sample is made to testify the arc mathematical model.
结合理论研究，制作了相应的灭弧室模型，对该电弧数学模型进行了实验验证。
According to the structure characteristics of high-low pressure chamber launcher, the interior ballistics of launcher is discussed by using the numerical simulation and experimentation.
针对高低压室发射系统结构特点，采用数值模拟与试验相结合的方法对其内弹道特性进行了研究。
Obtained numerical simulation results of three types of pulverization chamber flow field consisting of the gas phase and discrete phase.
对三种不同结构雾化室流场进行数值模拟，获得了包括气相和离散相在内的流动特性计算结果。
The numerical simulation result has promulgated in the combustion chamber the transient state mobile detail.
数值模拟的结果揭示了燃烧室内瞬态流动的细节。
A heat and mass transfer relation in a solar still was established and the steady state simulation experiments in a multi stage stacked tray distillation chamber were conducted.
建立了盘式太阳能蒸馏器中一组传热传质关系式，并用多级迭盘式蒸馏室进行稳态模拟实验。
With mechanism analysis and simulation study, the controlling mechanism of the chamber shape and the shape-controlling techniques of gas storage building are discussed in the paper.
通过机理分析与模拟实验研究，探索了溶腔形状控制机理，以及在盐层中建设储气库的形状控制技术。
The statistic model of the dusting efficiency for the sedimentation chamber is established. The computational method of the computer simulation is introduced.
建立了沉降室除尘效率的统计模型，并介绍了计算机模拟计算的方法。
The simulation result indicates that the simulation of the engine chamber performances by using Monte-Carlo method is feasible and that the non linear model is accurate enough.
仿真结果表明，利用M - c方法对推力室进行数值仿真是完全可行的，所用的非线性模型是足够准确的。
Using the analogy simulation, an experimental study of physical simulation about semisolid slurry's out flow from the stirring crucible and the filling state of the die chamber is carried out.
利用相似模拟的方法，进行了半固态浆料自搅拌坩埚的出流及压室充填状况的物理模拟实验研究。
The hydraulic characteristics of the throttled surge chamber under various hydraulic transition processes are analyzed through combination of numerical simulation and model test.
通过带调压室水电站的模型试验和数值仿真计算，分析了阻抗式调压室在各种水力过渡过程下的水力工作特性。
A large number of simulation tests for chamber blasting with concentrated or sub-concentrated charges were carried out in a site.
在现场进行了集中药包与分集药包硐室爆破的大量模拟试验。
Calculation and simulation measurement have been done in two dimension fashion for the electric field of the pictorial drift chamber.
对图象漂移室电场作了二维模拟测量和计算。
The article discusses the working principle, numerical simulation on the hydraulic transients and applications of safety membranes in lieu of a surge chamber.
简述了爆破膜工作原理，水力过渡过程数值模拟，并介绍若干水电站应用实例。
Numerical simulation was conducted to study the internal blast loading of explosion chamber with flat end using TVD schemes.
用TVD格式数值模拟了带平板封头爆炸容器的内部爆炸载荷的分布规律。
The simulation by adding stable state fault was used to study the effect of flow resistance coefficient of oxidant pipe in gas generator and chamber and oxidant temperature on the engine parameters.
用添加稳态故障的方法分析了燃气发生器和燃烧室氧化剂管路流阻系数，以及氧化剂温度对发动机参数的影响。
The combustion process in ceramic burner and chamber was studied by means of computer simulation.
应用计算机模拟技术研究了热风炉陶瓷燃烧器的燃烧过程。
Laser reconnaissance and warning radiation lab simulation test mode in laser extinctive chamber is analyzed. A simulation test project using laser designating simulator is proposed.
研究了利用激光暗室进行的激光侦察告警辐射式仿真测试模式，提出利用激光指示信号模拟装置的仿真测试方案。
The simulation results show that the heat transfer of rocket chamber will be enhanced when increasing the aspect ratio, but the pressure drop will increase simultaneously.
计算结果表明：增加通道深宽比对推力室壁面能够起到强化传热的作用，但同时也增加了冷却通道的进出口压差。
Mathematic model simulation indicated that mass based transfer model is more appropriate than experiential decay model to explain the results of chamber test.
经验衰减模型与物质传输模型的对比分析表明，物质传输模型比衰减模型更有利于解释环境箱试验结果。
The effects of combustion chamber pressure and mixture ratio on engine performance were analyzed based on simulation.
并根据结果分析了燃烧室压强和混合比对发动机性能的影响。
The effects of the clearance between the valve and resonance chamber and the valve opening on charging coefficient are also analyzed by simulation;
通过模拟计算分析了控制阀泄漏和开度对充量系数的影响；
The 2D unsteady simulation of the nozzle chamber has been done and the analyses prove the early results.
对脉冲喷嘴腔内流场进行了二维非定常数值模拟，通过对腔内压力和流场的分析，验证了上述结论；
This paper presents a finite-volume method for flow characteristics simulation in a combustion chamber with a flat-topped piston during the compression stroke.
本文提出压缩冲程期间计算平顶活塞燃烧室流动特性摸拟的有限容积法。
To this end, it is detected from the simulation results that the equivalent valve damping length and decompressing chamber volume significantly affect the outlet pressure.
分析结果表明：阀内流道的等效阻尼长度和压力反馈腔体积是影响阀出口压力的重要因素。
The result of numerical simulation indicates that a small circular flow occurs in RH vacuum chamber.
模拟结果表明RH真空室内流场中存在小环流现象。
A simulation method for fuel distribution and impinging in DID engine combustion chamber was proposed to realize 3-d visualization.
本文提出一种能够实现三维可视化的燃烧室内燃油分布和喷雾着壁特性计算的方法。
A simulation method for fuel distribution and impinging in DID engine combustion chamber was proposed to realize 3-d visualization.
本文提出一种能够实现三维可视化的燃烧室内燃油分布和喷雾着壁特性计算的方法。
应用推荐