Laser oxidizing for titanium surface hardening was studied.
研究了钛及其合金的激光渗氧硬化方法。
Experiment has shown that it has good effect on partial surface hardening.
试验证明这种发生器对材料的表面局部硬化非常有效。
Induction surface hardening of the workpiece material is usually carbon steel.
感应加热表面淬火的工件材料一般为中碳钢。
Now the surface treatment methods are surface hardening, tufftride, plasma CVD, etc.
目前常常用的表面处理方法有表面淬火、软氮化和等离子CVD等。
A new laser surface hardening technology of aluminium alloy was examined in this paper.
研究了一种新的铝合金激光表面强化工艺。
Under these circumstances there would always be some finite depth of surface hardening regardless of size.
在这种情况下不管零件尺寸如何，其表面总归有一定深度被硬化。
This paper introduces the applications of the very high power laser in the surface hardening of materials.
本文介绍大功率激光器在材料表面强化中的应用概况。
The Super carburization process can provide outstanding performance in the surface hardening of high-alloyed steel.
过渗碳处理可以有效提升高合金工具钢的表面特性。
This paper briefly introduces the principle, the advantages, and the use of plasma arc surface hardening technology.
本文首先简要介绍了等离子弧表面强化处理技术的原理、优点和用途。
Generally used in quenched and tempered state, can also carry on the carbonitriding and high-frequency surface hardening.
一般在调质状态下使用，还可以进行碳氮共渗和高频表面淬火处理。
Derusting, oxide skin removing and surface hardening for copper castings, sheet metal, stainless steel strips, aluminum castings.
铜合金铸件，薄板、不锈钢带、铝合金铸件除锈、除氧化皮及表面强化。
The results indicated that using laser surface hardening could remarkably improve the wear resistance of Febased sintered materials.
结果表明，经宽带激光表面处理后，铁基烧结材料的耐磨性显著提高。
Process parameters were found to obtain optimum effect of surface hardening, according to material property and technology requirement.
可根据材料的特性及技术要求，通过改变工艺参数得到理想的加工表面。
The grind-hardening is a new technology that integrates grinding and surface hardening and enhances material capability of workpiece surface.
磨削强化技术是利用磨削加工过程中产生的大量磨削热对工件材料进行表面热处理的新工艺技术。
In this paper, the xenon lamp radiation light beam surface hardening technology, which was developed abroad in the early 1990's, was summarized.
本文介绍了国际上90年代初新兴的氙灯辐射聚焦光束表面强化技术。
Effects of process parameters of plasma beam surface hardening treatment on hardening layer of boron cast iron and its microstructure and properties are investigated.
研究了等离子束表面硬化工艺参数对硼铸铁淬硬层及其组织与性能的影响。
The study shows that there exist remarkable Ti catalysis effects, which can increase the depth of a nitrided layer, enhance its surface hardening and nitrocarburize rapidly.
研究结果表明；钛催渗具有明显的催渗效果，可使氮、碳原子的渗入速度显著加快，提高渗层深度和渗层硬度。
The laser hardening technology used for crankshaft is introduced and the investigation on surface hardening of a nodular iron crankshaft was carried out by using a kW CO 2 laser system.
本文介绍了曲轴激光淬火强化技术，采用千瓦级快速轴流式激光器对球铁曲轴进行了激光淬火试验。
The working principle, structure and parameters design of plasma arc generator for heat treatment are described. Experiment has shown that it has good effect on partial surface hardening.
论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。试验证明这种发生器对材料的表面局部硬化非常有效。
Grinding hardening, the technology of hardening steel piece surface with grinding heat instead of high or medium frequency induction hardening heat, can integrate grinding surface hardening.
磨削强化处理技术是利用磨削热替代高、中频感应淬火热源对钢件表层进行强化处理，将磨削加工与表面强化合为一体。
The three key techniques for laser surface hardening of gear have been proposed in this paper. With using these techniques, an uniform hardened case along the flank of gear has been obtained easily.
提出了齿轮激光表面强化的偏置技术、变速扫描技术和辅助冷却技术，因而，获得了沿齿廓分布的均匀硬化层。
Unfortunately, though flat tappets from China are cheap, their metallurgy is suspect-and the same goes for the quality of their machining, heat treatment and surface-hardening.
不幸的是尽管中国制造的平头挺杆物美价廉，但是其冶金技术遭到质疑，加工、热处理、表面硬化质量也遭质疑。
One of the first steps you should take when hardening a machine is to reduce its attack surface. The more code that's running on a machine, the greater the chance that the code will be exploitable.
进行系统加固应该采取的首要步骤之一是降低其受攻击面：机器上运行的代码越多，代码被利用的机会更越大。
In this paper, optimization of phase change parameter and hardening parameter of closed hierarchical single surface model is studied.
对封闭型分级单屈服面模型参数中的阶段改变参数和硬化参数的优化进行了研究。
Nitriding develops extreme hardness in the surface of steel. This hardness ranges from 900 to 1,100 Brinell, which is considerably higher than that obtained by ordinary case hardening.
渗氮在钢表面获得远远超出正常标准的硬度。其硬度范围为900到1,100布氏硬度，这远高于普通表面硬化所获得的硬度。
Surface induction-hardening offers the possibility to selectively harden a component's raceway, while leaving the remainder of the component unaffected by the hardening process.
表面感应淬火提供有选择地淬硬部件滚道而部件的其余部分则不受淬火过程的影响的可能性。
Surface induction-hardening offers the possibility to selectively harden a component's raceway, while leaving the remainder of the component unaffected by the hardening process.
表面感应淬火提供有选择地淬硬部件滚道而部件的其余部分则不受淬火过程的影响的可能性。
应用推荐