The fabrication process of the devices is simple.
器件制造工艺简单。
The fabrication process and application of silicon carbide mirror are presented.
综述了碳化硅反射镜材料常用制备方法的特点。
The design principle and the fabrication process of color separation gratings are studied.
介绍了色分离光栅的设计原理，并对其制作工艺进行了研究。
In the fabrication process, it is a crucial step to purify and modify the carbon nanotubes.
在纳电子器件的制备过程中，碳纳米管的提纯和化学修饰是一个很重要的处理步骤。
The fabrication process of glass and glass microsphere for laser cooperation target was studied.
阐述了目标的漫反射特性对非合作目标相位式激光测距仪中光功率探测的重要性。
The filter features high cut-off frequency and the fabrication process is compatible with MOS process.
该滤波器具有高截止频率、与MOS工艺兼容、便于单片集成等优点。
The fabrication process is simple, the production cost is low, and the utility model has wide foreground.
该灭蚊炮竹采用的灭蚊剂高效无毒，制作工艺简便，生产成本低廉具有广阔的前景。
The fabrication process, sealing method and structure characteristics of PDMS fiber chips were discussed.
对PD MS光纤芯片的加工工艺、封装方法和结构特征进行了探讨。
Chapter three: Presents the fabrication process of micro-switch with cantilever beam and designed the masks.
第三章给出了等截面悬臂梁微开关的微机械加工工艺，设计了掩膜版及具体的工艺参数。
A feasibility method of purification of cleaning liquids in the fabrication process is presented in this paper.
本文介绍一种机械加工过程中的清洗液化的可行方法。
Therefore, the fabrication process and formation mechanism of carbon nano-materials have been widely investigated.
同时，研究溶剂热合成过程的反应机理，并研究了所制备的纳米材料的物化性质。
On the other hand, the new structure hasn't complicated the fabrication process, therefore hasn't increased the cost.
本文在理论分析基础上设计了传感器的结构及加工工艺流程。
In the second part studied the fabrication process of dielectric resonator antenna model and high permittivity ceramic plate.
研究中的第二个部分，是对于微波介电陶瓷制备介电共振器天线与高介电陶瓷薄板之制程方面的研究。
A big challenge to the development of this type of ASICs is the fabrication process for high-voltage, high-frequency pair JFETs.
国内在这些专用集成电路的研制工作中所面临的主要困难，是高耐压高频结型场效应对管的工艺制作。
The results show that the fabrication process of the microfluided chip is simplified, and the electroosmosis property is steady.
结果表明，该芯片的制作工艺简单，且电渗性能稳定。
The fabrication process of a compact planar waveguide etched-grating(EDG) demultiplexer based on silicon-on-insulator(SOI) is studied.
研究了基于绝缘材料上的硅（SOI）材料的平面波导刻蚀光栅分波器的主要制作工艺。
The goals of testing are to discard defective devices and learn information to improve the fabrication process yield and reduce costs.
测试的目的是检测出有缺陷的器件并且获得改善制造工艺成品率的方法，从而降低器件的制造成本。
The fabrication process is carefully controlled so that the grating groove and multilayer-coating parameters well meet the design targets.
由于对离子束刻蚀工艺和镀膜工艺的精细控制，光栅的槽形参数及多层膜参数良好地满足了设计要求。
The article introduces the fabrication process of 350mw steam turbine outer cylinder, and describes the solution to every difficulty in detail.
介绍了350MW汽轮机低压外缸的制造过程，并对各个制造难点的解决作了详细的说明。
The porosity of porous Al-Si alloy is 40~80% and percentage of open-cell is above 85%, bom of which vary with the fabrication process of preform.
孔隙率在40～80%，孔隙连通率在85%以上，孔隙的大小和孔隙率取决于预制块的制备工艺。
The principle of eutectic bonding was analyzed. The fabrication process of eutectic bonding was discussed, the test result of eutectic bonding was given.
分析了金硅共晶键合的基本原理，讨论了键合实验的基本工艺，给出了键合的测试结果。
These techniques allow for the measurement of the composite properties during the fabrication process as well as during the use of the composite material.
这些技术允许在制造和使用复合材料的过程中进行复合材料性能的测量。
The main parameters of the fabrication process and the effect of the forming conditions on FRM sheet properties are emphatically discussed in this paper.
着重探讨了成形技术中的主要影响因素及成形条件对成形后金属基复合材料特性的影响。
In chapter3, some experiments are conducted to get the key parameters of the fabrication process, at the same time, the feasibility of the process is proved.
第三章对探卡工艺流程中的关键步骤进行了工艺试验，得到关键工艺参数，也同时验证了整个探卡工艺的可行性。
Integration project of array with CMOS signal circuit was brought forward according to the fabrication process of plane-array sensor and its structure characters.
根据制作阵列的工艺过程和结构特点，提出了阵列和CMOS信号电路的集成方案。
The structure and specifications for agitator made of Mo alloy clad with Pt Rh, as well as the fabrication process and the reward of using the products are presented.
介绍了铂铑包覆钼合金搅拌器的结构与技术要求，以及搅拌器的制作与使用效果。
The fabrication process and properties and applications of continuous fibers reinforced CVI SiC matrix composites by chemical vapor infiltration are presented in this review.
综述了化学气相渗透法制备连续纤维增强碳化硅陶瓷复合材料的过程，以及碳化硅陶瓷复合材料的性能及应用。
Its optical density, with help from a metallic layer, has been achieved at 5.5. Since this organic material is a negative photoresist, the fabrication process is rather simple.
借助金属层，其光学密度已达到5.5。由于这种有机材料是负性光敏抗蚀剂，所以加工过程相当简单。
Its optical density, with help from a metallic layer, has been achieved at 5.5. Since this organic material is a negative photoresist, the fabrication process is rather simple.
借助金属层，其光学密度已达到5.5。由于这种有机材料是负性光敏抗蚀剂，所以加工过程相当简单。
应用推荐