The finite element analysis software of MSC.
使用有限元分析软件MSC。
The finite element analysis model of truss structures was established.
建立了桁架结构的有限元分析模型。
The finite element analysis of reel structure of automobile crane is studied.
对汽车起重机卷筒结构的有限元分析方法进行了研究。
Experimental results verify the correctness of the finite element analysis results.
实验分析结果验证了有限元分析的正确性。
The method is tested by the finite element analysis for a single-layer latticed shell.
利用有限元模拟，应用上述方法对一单层球面网壳结构进行了损伤诊断。
At the same time, the finite element analysis of metallic mirror model is also presented.
同时给出了金属反射镜有限元分析模型。
The finite element analysis model of cylinder and vessel head structures was established.
建立了高压容器筒体与封头结构的有限元分析模型。
The up-to-date research progress of the finite element analysis of soil cutting is reviewed.
阐述了用有限元法分析土壤切削问题的研究进展情况。
The finite element analysis and calculation of heat transfer in ablating bodies are presented.
本文采用有限元法，分析和计算了有热解的再入烧蚀体的传热问题。
Furthermore, the fixture structure is optimized by using the finite element analysis software ANSYS.
并利用有限元分析软件Ansys进行辅助设计，对其结构进行优化。
And import the model into the finite element analysis software of ANSYS for modal calculation and analysis.
进而将齿轮的参数化模型导入通用有限元分析软件ANSYS，对其模态进行计算分析。
The finite element analysis method is used to check the mechanical characteristic of the mainly structures.
在设计中应用了有限元方法对结构的主要受力部件进行了力学分析。
Finally, a series of conclusions significant to the finite element analysis for the connecting rod are given.
文中给出了连杆有限元分析的一系列结论。
The finite element analysis and optimization design of piezoelectric intelligent beam was made based on ANSYS.
运用ANSYS软件进行压电智能梁结构的有限元分析和优化设计。
The initial stress field is very important in the finite element analysis of geotechnical engineering structure.
岩土工程问题的有限元分析一般需要考虑初始应力场。
Based on the finite element analysis, the plastic response chart of typical pressure bearing structures were built.
在有限元分析的基础上，建立典型承压结构塑性载荷响应图谱。
Meanwhile, it applies the finite element analysis to make strength check, the result satisfies the strength requirement.
同时采用了有限元的分析方法对其进行强度校核，结果满足强度要求。
To examine the monitoring results, the finite element analysis is used to calculate the effect between jacked piles and soil.
为了测斜仪技术检验监测结果的准确性，采用有限元分析方法计算静压桩与土的相互作用效果。
The finite element analysis was carried on to a ATP installment, and obtained this equipment structure modality characteristic.
对某atp装置进行了结构的有限法元动力分析，得到了该装置的结构模态特征。
In this paper, the mode character of MWM395 engine block is analyzed with the finite element analysis on the platform of I DEAS.
本文应用有限元法在I - DEAS软件平台上对MWM395柴油机机体进行了模态分析。
The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.
本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；
Combining the nonrestrictive and nonlinear optimizing method with the finite element analysis, the optimum design can be obtained.
应用非线性无约束的优化技术，结合有限元计算，得到良好的优化设计。
This paper describes the finite element analysis model, load condition and results of C37-type hopper car body exported to Australia.
介绍了出口澳大利亚c37型漏斗车车体有限元分析模型、载荷工况和结果。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
The finite element analysis showed that the normal stress distribution of the grillage wall was about the same as that of the solid wall.
有限元计算表明，网格墙在轴力和水平力作用下的正应力分布与实体墙总体上一致；
Based on analyzing the wall thickness design and stability checking method of drum, the finite element analysis of the crane 'drum is studied.
在分析传统卷筒壁厚设计与稳定性校核方法的基础上，对起重机卷筒进行了有限元分析。
The secondary stresses of typical planar steel frames due to the rigidity of panel points are calculated by the finite element analysis program.
应用有限元分析软件，对两种跨度下典型平面钢屋架节点刚性所产生的次应力进行了分析计算。
The rule of earth pressure varying with displacement presented in this paper is well comparable with the results of the finite element analysis.
用该方法描述的土压力随位移的变化规律与有限元法计算结果具有很好的可比性。
The rule of earth pressure varying with displacement presented in this paper is well comparable with the results of the finite element analysis.
用该方法描述的土压力随位移的变化规律与有限元法计算结果具有很好的可比性。
应用推荐