The whole ship slab under the thermal load is analyzed using the three dimensional finite element.
对温度荷载作用下整体滑动板块进行了三维有限元分析。
Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).
用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。
In this paper the deformations of abutment of the Goupitan Project are analysed by three dimensional finite element method.
采用三维有限元方法分析了构皮滩拱坝坝肩变形。
The automatic mesh generating principle and its algorithm are obtained successfully for some representive three dimensional finite element problems.
成功地获得了一些具有应用代表性的三维板壳和块体结构有限元计算网格的自动划分原理和算法。
Taking a transtibial residual limb as object, three dimensional finite element(FE) models of the residual limb and prosthetic socket were constructed.
以小腿残肢为研究对象，建立了残肢与接受腔三维有限元模型。
According to the actual structure characteristics of a cable-stayed pipeline bridge, a three dimensional finite element mathematical model is developed.
根据斜拉索管桥的实际结构特点，建立了三维有限元计算模型。
With three dimensional finite element method, the author analysed and calculated the stress of the dam section with erecting bay in the Zuojiang water resources pivotal project.
利用三维有限元法分析计算了左江水利枢纽安装间坝段的应力。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
Based on three dimensional finite element analyses of magnetic fields, the cogging torque of a prototype motor is calculated using the virtual work and Maxwell stress tensor methods.
在电机内磁场三维有限元数值分析的基础上，采用虚位移和麦克斯韦张量两种不同的方法计算了电机的脉动转矩。
The load analysis and calculation under wave action of this platform is developed, on this base, a three dimensional finite element strength analysis for main structural body is conducted.
展开了对该平台在波浪作用下载荷的分析计算，在此基础上对主体结构进行了三维有限元强度分析。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
Objective a three dimensional finite element model after total hip replacement was established to analytically study the stress distribution of the artificial stem, bone cement and human femur.
目的建立人工髋关节置换术后的三维有限元模型，分析研究人工股骨柄、骨水泥和人体股骨的应力分布。
Conclusion Three dimensional finite element analysis is a kind of convenient and practicable method to be used as the confirmation and supplement of experimental biomechanics study of human being.
结论三维有限元分析方法是一种简便实用的生物力学研究方法，可作为实验生物力学研究的验证和补充方法。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
Objective To establish a three-dimensional finite element model of normal human ankle as a foundation of finite element analysis in this area.
目的建立正常人踝关节的三维有限元模型，作为该部位进一步有限元分析的基础。
Based on the theory of the unsteady temperature field and stress field, three-dimensional finite element model is set up. The wall is analyzed by program of ANSYS finite element analysis.
本文根据瞬态温度场和应力场理论，建立地下室混凝土墙体的三维有限元分析模型，利用有限元分析程序ANSYS对基本工况下的墙体进行分析。
In this paper, vibration induced by flood release of Dongping Arch Dam is studied fully by a three-dimensional finite-element random vibration method.
采用三维有限元随机振动法对洞坪拱坝泄洪诱发振动进行了较为深入的研究。
This paper applies the three-dimensional finite element method to the analysis of the stress for steam expanding vessel with tangential pipe, and the stress distribution has been obtained.
采用三维有限元方法对蒸汽扩容器与切向接管联接的关键部位进行了应力分析，获得了该部位的应力分布。
Methods Spiral ct scanning, image processing and CAD technology and FEM software were employed in the study to construct the three-dimensional finite element model of maxilla with a palatal implant.
方法采用螺旋ct断层扫描、计算机图像处理、计算机辅助设计和有限元软件处理，建立含腭部种植体的上颌骨三维有限元模型。
Conclusion Establishment of three-dimensional finite element models of artificial lumbar intervertebral disc and analysis of its stress are feasible. The results are reliable.
结论建立人工腰椎间盘三维有限元模型并进行其应力分析是可行的，结果是可信的。
Objective: the three-dimensional finite element method models of the maxillary second molar was constructed.
目的：建立人上颌第二磨牙三维有限元模型。
The influence coefficients of the film are calculated by using the three-dimensional finite element method.
利用三维有限元方法得到基体的影响系数。
Objective: To establish a three-dimensional finite element model of normal human hip as a foundation of finite element analysis in this area.
目的：构建正常人体髋关节的三维有限元模型，作为该部位进一步有限元分析的基础。
The subsidence of foundation and stability of fill slope are analyzed by means of three-dimensional finite element and Relative Suggestions are put forward for the project construction.
本文利用三维有限元法对地基沉降、填方边坡稳定性等问题进行了分析，对工程施工提出了相应的建议。
This paper adopts the three-dimensional finite element model, analyses the mechanical tendency with the variety of the thickness and modulus of the pavement structure.
采用三维有限元计算模型，分析了路面结构厚度和模量变化时的力学响应变化趋势。
Methods The stress distribution and displacement of abutment were studied and analyzed by means of three-dimensional finite element when different loading was applied.
方法：用三维有限元法研究天然牙及中间种植体受力后的应力分布特点及位移规律。
Objective To develop a three-dimensional finite element model of human foot for studying stress distribution of the hind foot bones during the jumping moment.
目的建立足部三维有限元模型，对足后部骨骼在踏跳中的应力分布进行分析。
Objective To develop a three-dimensional finite element model of human foot for studying stress distribution of the hind foot bones during the jumping moment.
目的建立足部三维有限元模型，对足后部骨骼在踏跳中的应力分布进行分析。
应用推荐