• youdao

  • Systems for automatic tool wear monitoring contribute to measures to reduce manufacturing costs considerably.

    刀具磨损状态自动识别系统能够显著地降低制造成本。

    youdao

  • Cutting temperature has direct effects on not only tool wear and tool life but also machining accuracy and quality of machined surfaces.

    切削温度不仅直接影响刀具的磨损和耐用度,而且也影响工件的加工精度和已加工表面质量。

    youdao

  • Causes of tool wear shield.

    盾构刀具磨损原因探析。

    youdao

  • The cutting force signals and vibration signals are good means to research tool wear.

    刀具的切削力和振动信号是研究刀具磨损状态的很好的手段。

    youdao

  • The on-line monitoring of tool wear and breakage is one of the basic functions of FMS.

    刀具磨损、破损的在线监控是FMS的基本功能之一。

    youdao

  • Finally, the validity of the method is tested by means of cutting tool wear experiment.

    通过刀具磨损实验验证了该方法的有效性。

    youdao

  • An application of PC and microcontroller in the system for tool wear detection is introduced.

    介绍一种以PC机为后台,以双单片机为前台的刀具磨损状态识别系统。

    youdao

  • The coat shed, tool tip breakage, diffusive wear have been observed as the main form of tool wear.

    发现涂层脱落、刀尖破损、扩散磨损为微径铣刀的主要磨损形式。

    youdao

  • New method for online tool wear estimation in spiral rod numerical controlled milling is presented.

    介绍了一种在线估算螺杆数控铣削中刀具磨损量的新方法。

    youdao

  • Good extreme pressure, abrasion resistance, reduce the tool wear, extending the service life of cutter.

    良好的极压、抗磨损性能,减少刀具磨损,延长刀具寿命。

    youdao

  • The experiment result proves that this system can be applied to the real-time tool wear monitoring successfully.

    实验结果证明该系统可成功应用于刀具磨损量的实时监测。

    youdao

  • With the increment of tool wear, the signal magnitude increases and the vibration energy increases correspondingly.

    随着刀具磨损的增加,振动信号的振幅增大,振动能量亦相应增加。

    youdao

  • In this paper based on image analysis theory the chip shape recognition and tool wear inspecting were analyzed and studied.

    本文以图像分析理论为基础,针对切屑形态识别和刀具磨损检测进行了研究。

    youdao

  • Therefore, the tool wear monitoring had important practical significance for high speed milling machining technology application.

    因此,刀具磨损的监测对高速铣削加工技术的推广应用有重要的实际意义。

    youdao

  • The characteristic values of vibration signals were used as testing parameters of tool wear for milling special shaped spiral rods.

    针对异型螺杆铣削加工,采用振动信号特征值作为检测刀具磨损的参量。

    youdao

  • However, HSM tool wear fast and service life is short. "Cutter breakage" phenomenon easily appears if not for real-time monitoring.

    但是,高速铣削刀具磨损快,使用寿命短,如不进行实时监测很容易出现“打刀”现象。

    youdao

  • This method is to control lapping parameters, make lapping tool wear well distributedly and thus assures lapping tool surface accuracy.

    通过控制研磨参数,使得磨具磨损均匀,从而保证磨具面形精度。

    youdao

  • Finally, the influence of cutting parameters and tool wear on burr formation are studied through the experiment of machining micro-flute.

    最后,本文针对微槽切削加工过程,分析了切削参数和刀具磨损对工件毛刺形成的影响。

    youdao

  • After survey of tool wear status online monitoring, the paper gives a new way to monitor the tool wear status based on speech recognition.

    分析了刀具在线监测研究概况,提出了基于语音识别技术的刀具工况在线监测方法。

    youdao

  • Cutting force signals come from the machining directly, which are highly relevant to the tool wear, and the vibration signals are easy to get.

    切削力信号直接来源于切削加工点,与刀具磨损相关程度高,振动信号容易获得。

    youdao

  • The Paper Presents a feasible study of modeling on tool life for the failure modes of tool wear and fracture based on methods of catastrophe theory.

    介绍了基于突变论的方法建立刀具磨损与破损失效寿命模型的可行性的研究结果。

    youdao

  • CNC tool wear monitoring has great importance in improving the utilization of machine tools and in reducing the economic losses due to the tool wear.

    数控机床刀具磨损监测对于提高刀具利用率,减小因刀具磨损而造成的损失具有重要意义。

    youdao

  • The maximal error is 7.4% in terms of two-dimension characteristic monitoring tool wear and the method can meet the need of generic project by the example.

    经过实例检验,根据二维特征检测刀具磨损的最大误差在7.4%之内,可满足一般工程要求。

    youdao

  • This paper researches on the tool wear condition monitoring by cutting sound signal and workpiece surface texture based on analysis of the relative situation.

    本论文在分析现状的基础上,从切削声信号和工件表面纹理这两个方面对刀具磨损状态监测技术进行了研究。

    youdao

  • It is proved that the tool wear mechanism of turn-milling (aluminum) alloy is felt wear, and that of turn-milling stainless steel is fatigue-exfoliative wear.

    研究表明,车铣铝合金的刀具磨损机理主要以刀具表层材料的黏结磨损为主,而车铣不锈钢的刀具磨损机理主要以刀具表层材料的疲劳—剥落磨损为主。

    youdao

  • Cutting force, cutting temperature and tool wear are the main indicators reflecting the cutting process, especially the cutting force, the use of wider range.

    切削力、切削温度和刀具的磨损是反映切削过程的主要指标,特别是切削力,其使用范围更广。

    youdao

  • Cutting force, cutting temperature and tool wear are the main indicators reflecting the cutting process, especially the cutting force, the use of wider range.

    切削力、切削温度和刀具的磨损是反映切削过程的主要指标,特别是切削力,其使用范围更广。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定