The more the weld wire energy is, the worse the resistance corrosiveness of austenite stainless steel has.
焊接线能量大的奥氏体不锈钢耐腐蚀性差。
The feasibility, cost and theoretic basis of the continuous extrusion process for producing tin brass weld wire are studied with its technological process and the design of extrusion dies introduced.
本文论述了锡黄铜焊丝连续挤压工艺的可行性、成本和理论基础，介绍了连续挤压工艺的方案以及挤压模具系统的设计。
Weld penetration and wire melting speed of AC PMIG welding not only have relationship with welding current but also with electrode negative ratio.
交流脉冲MIG焊其焊缝熔深及焊丝熔化速度不仅与焊接电流有关，而且与负极性比率有关。
Processing sets include: punch, lathe, drilling machine, contouring machine, grinding machine, wire cutting machine, spot welding, gas shield weld, late shears, CNC machined and cutting center.
加工设备包含：冲床、车床、钻床、铣床、磨床、线切、氩弧焊机、点焊机、气体保护焊机、剪板机、数控加工中心、切削中心。
Regardless of torch orientation or part size or shape, the EA1400N robot prevents bent, pinched or stretched cables, minimizing wire feed problems and optimizing weld performance.
无论是在焊丝方位或部分大小或形状大小的问题上，为使电线尽量减少供给问题和优化焊接性能。EA1400N机器人都会防止弯曲，挤压或拉伸电缆。
The unique design of the output of the physical properties more suitable for filling wire welding, weld appearance.
独特的输出物性设计更适合填丝焊接，焊缝美观。
The effects of arc voltage, welding current and heat input on the weld appearance in submerged-arc welding(SAW) of A105 steel with small diameter welding wire were experimentally researched.
主要研究A105钢小直径焊丝埋弧焊时，电弧电压、焊接电流和焊接热输入对焊缝成形的影响。
When the wire being stopping, the welding power outputs high level voltage with wire burning back and forming a liquid weld metal drop.
开始送丝后，焊接电源输出低电平，熔滴依靠送丝动量向熔池过渡。
Introduce an automatic welding machine for platinum & iridium spark plugs, This machine is used to weld the fine platinum & iridium wire on the ignition end of spark plugs.
介绍了一种铂、铱金火花塞自动焊接设备，该设备用于将细小的铂、铱金丝焊接在火花塞的点火端上，全自动、焊接质量稳定可靠。
Basic flux-cored wire for backing weld to T91 tube was studied in this paper.
研究了用于T91钢管打底焊的碱性渣系药芯焊丝。
In this paper, the effect of copper content on the weld metal toughness in SAW of HSLA steels was studied by changing the copper content in welding wire.
采用埋弧焊方法，通过改变焊丝铜含量来改变焊缝金属中的铜含量，研究铜对高强度低合金钢焊缝金属韧性的影响。
The advanced development process flow of "converter-small billet continuous casting machine-high speed wire rod mill" is adopted in developing EH14 wire rod for weld.
青钢应用“转炉-小方坯连铸机-高速线材轧机”工艺流程试制EH14焊接用钢盘条。
ZL114A aluminum alloy sheet was tested by laser filler wire welding . Through the three different alloy compositions of aluminum alloy welding wire, to add different alloy element to the weld.
对ZL114A铝合金薄板采用激光填丝焊接，通过三种不同成分的铝合金焊丝，向焊缝中添加合金元素。
Flux-cored wire is applied to the austenitic stainless steel pipe by back weld, MAG for the filling and cosmetic weld, at horizontal fixed round welding vertically up.
采用药芯焊丝对奥氏体不锈钢管道进行打底焊接，MAG焊填充及盖面焊，立向上的水平固定全位置焊接。
When electrode negative ratio is zero, which is using MIG welding with DC ami welding wire being positive polarity, weld penetration is maximum , wire melting speed and deposition rate are minimum;
当负极性比率等于零即直流且焊丝为正极性的MIG焊时，其焊缝熔深最大，焊丝熔化系数最小，熔敷速度最小；
Two groups of matching relation of the weld speed and the wire feed rate were found in a condition of invariable laser power and focus position.
前者试验获得了一定激光功率和离焦量条件下两组焊接速度和送丝速度的匹配关系，并发现填充焊丝的加入对焊缝咬边现象确有改善；
Compared with cored wire, the solid wires have not so good welding usability showing oxidized and crinkled weld appearance as the welding parameters are greater.
而对于实心焊丝，在较大焊接工艺规范下，很容易出现焊缝表面的氧化起皱，焊缝成型不良。
Due to its simply-designed controlling circuit and convenient operation, it can be used effectively in end-weld of bar steel and realize the welding of wire rod tag.
该点焊机控制电路简单，操作方便，既能用于棒材的端面又能实现线材标牌挂件的焊接。
Reducing content of hydrogen effect of fluoride, carbonate, active chide and rare earth oxide in weld by self-shielded flux-cored wire with CaF2-TiO2 MgO slag system is investigated.
探讨氟化物、大理石、高价氧化物和稀土氧化物在氟钙钛渣系自保护药芯焊丝中的降氢机理。
Reducing content of hydrogen effect of fluoride, carbonate, active chide and rare earth oxide in weld by self-shielded flux-cored wire with CaF2-TiO2 MgO slag system is investigated.
探讨氟化物、大理石、高价氧化物和稀土氧化物在氟钙钛渣系自保护药芯焊丝中的降氢机理。
应用推荐