研究了固体催化剂机械强度测试与表征技术。
Secondly, the mechanical-strength measurement and characterization of solid catalysts are investigated.
电介质强度测试者应该按照UL 745-1规范。
Dielectric strength tester shall conform to UL 745-1 specifications.
旨在提供井架强度测试及其数据处理的一般理论和方法。
The purpose is to present a common theory and method of shaft frame hardness testing and data processing.
对挤条产品有侧压强度的测试，堆积强度测试和耐磨测试。
For extrudates there are side crushing strength tests, bulk crushing strength tests, abrasion tests.
对共混切片进行DSC、扫描电镜以及纤维拉伸强度测试。
The blend was characterized by DSC and SEM, and the strength of PP composite fibers was tested.
提出一种新的电镀金刚石工具镀层与基体结合强度测试方法。
A new method for measuring bonding strength between electroplated layer and substrate of diamond tool is proposed.
同时对钛基吸气剂进行了形貌观察、孔隙度测试和强度测试。
At the same time, the Ti-based getters were studied by means of scanning electron microscopy, porosity test and mechanical strength test.
试件制作及粘接强度测试：每个试件由两个合金铸件粘接而成。
Making of specimens and measurement of shear bonding strength(SBS): Each specimen was composed of two kinds of casting.
聚乳酸类时间依靠强度材料的植入物强度测试标准应该被重新审阅。
The standards for mechanical testing of implants made of strongly time-dependent materials like polylactide should be reconsidered.
本文介绍Msp430内部资源以及它在球团矿抗压强度测试中的应用。
This paper presents an application of MSP430 to test the pressure strength of iron ore pellet.
研究用这样的方式进行：每辆接受测试的汽车的乘客开启声音强度测试仪。
The study was undertaken using a sound level meter operated by a passenger in each car tested.
根据粘接接头的特点和需要，自行设计和制造了异种材料粘接强度测试平台。
According to the characteristics and requirements of the adhesive joint, the authors design and set up the testing platform of bonding strength for different materials.
应用热膨胀测试、抗折强度测试和可见光透过率测试分析了微晶玻璃的性能。
The performances are studied by means of heat expansion testing, intension testing and visible light transmission testing and so on.
对焊接接头进行了拉伸强度测试、断口分析、金相组织分析、显微硬度分析。
Tensile testing, fracture analysis, microstructure analysis, hardness test were carried out on the welded joint.
针对沥青路面层间推移问题，设计开发了路面材料剪切仪用于层间抗剪强度测试。
Aiming at the phenomenon of cutting slippage between the layers of the asphalt pavement, a machine is designed to test the shear-strength between pavement layers.
通过试验分析比较铣槽深度的改变对中密度纤维板表面结合强度测试结果的影响。
This paper analysed the influence of specimen thickness on test results of surface bonding strength of thin MDF.
碳纤维增强复合材料层剪强度测试结果表明，基体适用于纤维热熔法缠绕复合材料。
ILSS result of carbon fiber reinforced composite shows that the matrix is suitable for hot-melt carbon fiber winding composite material.
介绍了一种高强度光敏胶拉伸剪切强度测试方法，分析了影响测试结果的几种主要因素。
An introduction to the testing method for tensile and shear strength of high strength photosensitive glue is given and the main causes that have influence on the testing result is analyzed.
环境光线测试仪主要用于环境光线强度测试，借以发现光线强弱是否符合我们生理需要。
Environmental light testing equipment is mainly used to test intensity of ambient light. Its purpose is to find out whether intensity of the light meets our physiological needs.
介绍一种针对专门用于火灾损伤后混凝土强度测试的智能超声诊断系统的原理和硬件设计。
The principle and hardware design of an intelligent diagnosis system used in the testing of concrete intensity damaged after fire are introduced.
研究了水灰比制度对强度测试结果的影响。讨论了现行国标中水灰比制度存在的一些问题。
The effect of water -cement ratio on the test result is studied, and a few problems involved in water - cement ratio test in National Standard (GB) is also discussed.
阐述了试样尺寸，温度、湿度、缺口以及缺口加工方式等因素对塑料冲击强度测试结果的影响。
It expatiated the effects of the factors, such as sample size, temperature, humidity, notch and etc, on the result of the plastic impact strength test.
催化剂的扫描电镜分析、侧压强度及抗拉强度测试证明，炭纤维使催化剂的机械强度明显提高。
Scanning electronic microscopy analysis, the side pressure and the tensile strength tests provided that mechanical strength of catalysts were obviously enhanced.
各项测试包括椅背正反面强度测试、椅背动作耐久测试、座面强度测试及座面动作耐久测试等。
Testing include seat right side and back side strength testing, seat surface strength testing and seat surface activity endurance testing.
对瓦楞纸板边压强度测试进行均匀性分析，介绍了破坏性比对测试样品的选用和均匀性分析方法。
The selection and analysis of uniformity of devastating contrastive test sample were introduced and the uniformity of corrugated cardboards marginal pressure strength was analyzed.
根据试验目的和要求，设计研制了颗粒强度测试装置，并对不同粒径的钙质砂颗粒强度进行了测试。
The testing device of individual particle strength was designed and individual calcareous sand particles with various sizes were tested.
插头完成了要求的弯曲周期，没有出现上文所提到的最后结果，并且通过了电绝缘强度测试，没有损坏。
The cord set completed required cycles of flexing with no occurrence of end results and also successfully completed the Dielectric Strength Test without breakdown.
乘客带有八到十个声音强度测试仪，在旅途中放在距离驾驶员左耳不同的位置，在不同的车速下，进行测试。
The passenger took a series of between eight to 10 sound level measurements at various points in the journey from the position of the driver's left ear, at various speeds.
乘客带有八到十个声音强度测试仪，在旅途中放在距离驾驶员左耳不同的位置，在不同的车速下，进行测试。
The passenger took a series of between eight to 10 sound level measurements at various points in the journey from the position of the driver's left ear, at various speeds.
应用推荐