利用电刷镀技术对塑料模具进行修复。
Brush plating technology for repairing the plastic dies has been adopted.
电刷镀镍后的零件疲劳强度下降约30%。
When the parts are brush plated with nickel, their fatigue strength decreases by 30%.
采用电刷镀技术具有省时、精确度高等优点。
The application of the plating has advantages of saving time, high accuracy and etc.
研究了电刷镀镍的工艺、镀层微观形貌与镀层性能。
The process of the brush plating Ni, the microstructure and the properties of the plating layer are studied and analyzed.
阐述电刷镀铁液贮存期间和刷镀过程中防氧化的方法。
The ways to prevent iron brush plating solution from being oxidized during storage and working are described.
并介绍了电弧喷涂和电刷镀一体化快速模具制造设备。
An equipment for rapid die manufacture with the combination of electric arc spraying and brush plating was introduced.
本文简要介绍电刷镀新技术的原理，工艺特点和应用范围。
The fundamentals, the process characteristics and the ranges of utilizing the new technology of electric brush plating are briefly introduced in this paper.
介绍镍、钴、二氧化锆电刷镀复合镀液的组成和电刷镀工艺参数。
This paper introduces the component of Ni-Co-ZrO_2 composite brush solution and the technological parameters for brush electroplating, expounds the effect and economical value.
采用新型的内孔电刷镀技术对失效的发动机缸套内表面进行了再制造。
Abstract :A novel bore brush electroplating technology was applied in remanufacturing for internal surface of failed engine cylinder body.
综述了近年来用电刷镀方法制备复合材料镀层的最新进展及研究动态。
The state-of-the-art study and development of electro-brush in recent years are reviewed.
分析了飞机起落架电刷镀后产生裂纹的原因，并通过试验的方法提出改进措施。
This article analyses the cause of cracks after brush-plating on undercarriage and brings forward ameliorative measures by experimentation.
本文详细阐述电刷镀技术的工作原理、特点以及它在塑料模具中的应用与前景。
Principle and Character of Brush-electroplate has been expounded particular, and applications of its in repair and protect plastic mould has been brought forward.
电刷镀是利用电化学沉积的新型电镀方法，可显著提高模具的性能和使用寿命。
Brush_plating is a new electroplate method which introduces the electrochemical deposition technology. It can improve the capability and duration greatly.
前言：介绍三种常用表面强化技术即电火花沉积、电刷镀和热喷涂的原理和特性。
Describes the principles and characteristic of several surface field repair technology: electro-spark deposition, thermal sprays, brush plating.
详细给出了齿轮喷丸电刷镀复合修复工艺的流程、镀液配方和主要工序工艺参数。
The flow, the components of plating liquid and the parameters of master working procedures for renovating gears by shot-peening and brush-plating were detailedly presented.
进口汽车的曲轴价格昂贵，磨损后在没有配件的情况下可采用电刷镀技术来修复。
Since a spare part of crankshaft of an imported motor vehicle is very expensive, a worn crankshaft can be rehabilitated by brush-plating if there is no spare part.
可以根据客户要求提供以上产品的定制服务，还根据客户要求研发新的电刷镀产品。
Based on customer requirements to provide more customized service products, according to customer research and development of new products, brush.
过去电刷镀都用镍镀层代替铬镀层，但镍镀层的耐磨性、硬度等性能不如铬镀层。
In conventional brush plating, Ni plate is used to replace Cr one, but the former is not as good as the latter in wear resistance, hardness and so on.
研究了刷镀参数、底镀层种类和电源输出方式等对电刷镀铁层光洁镀与结合力的影响。
The effects of parameters, subbase deposit and power output on surface roughness and adhesion of the brush plated iron film were studied.
现场应用情况表明，采用电刷镀镀层的光杆，无腐蚀使用寿命已经达到原来的两倍以上。
The field application proves that the corrosion free service life of plain rod with brush plating is more than two times as long as that of the original one.
现场应用情况表明，采用电刷镀镀层的光杆，无腐蚀使用寿命已经达到原来的两倍以上。
The field application proves that the corrosion free service life of plain rod with brush plating is more than two times as long as that of the original on...
在合适的电刷镀工艺下，镀层表面平整、光滑，具有较高的显微硬度、耐蚀性和结合强度。
The layer is smooth with higher microhardness, corrosion and bonding strength by using the proper process.
分析了直升机主减速器齿轮电刷镀修复后产生裂纹的成因，通过试验提出了喷丸强化改进措施。
The cause of cracks after brush-plating on the main speed reducer of helicopter was analyzed and the ameliorative measures by shot-peening were brought forward consolidation.
相对于手动电刷镀镀层，自动化镀层表面形貌更加均匀细化，组织更加致密，显微硬度更高。
Comparing with the manual coating, the auto coating had smoother surface, denser structure and higher hardness.
采用纳米颗粒复合电刷镀技术维修船用柴油机气阀导管，并解决了电刷镀工艺的多项技术难点。
The complex brush electroplating technology using nano particles is applied to maintain air valve spindles of marine diesel engines. Difficult technical key problems of the technology are solved.
介绍了镍钨镀层、镍钨硼（磷）镀层、含钨复合镀层和含钨电刷镀镀层等的研究与开发的近期进展。
The paper present the new developments of Ni-W coat, Ni-W-B coat, tungsten composite coat and tungsten brush coat etc.
在逆变脉冲电刷镀技术修复后，使用扫描电镜观察刷镀表面形貌，得到菜花头状的致密、均匀组织；
In the invert and variable pulse electrical brushing plating technology experiment, after repair there are many Cauliflower-like organization dense and uniform under the metallurgical microscope;
基于此，本文创造性地将复合电刷镀技术和纳米粉材料有机结合，成功制备了含纳米粉复合电刷镀层。
Base on these, a composite coating containing nano-powder is prepared by brush plating in this thesis.
在展览的电力水晶宫在伦敦，他们报告说，霍德森引擎被认为是驾驶的发电机，电刷镀，克，西门子等。
At the Exhibition of Electricity at the Crystal Palace in London, they reported that the Hodson engine was seen driving generators by Brush, Gramme, and Siemens.
介绍了综合运用电刷镀、热喷焊技术对德国制造的三叶罗茨鼓风机密封筋、型面进行“再生”的工艺过程。
Technological process of regeneration of seal rib and profile on tri-lobe Roots blower made in Germany is introduced comprehensively using the technique of electric brush plating & hot spray welding.
应用推荐