When designing any product from the ground up, be it a Web application or a paper plate, the most important thing to consider is who will be using it.
在从头开始设计任何产品时，不管是Web应用程序还是简单的纸质盘子，最重要的一点是要考虑谁将会使用这个产品。
Glue leaves to the outside edges of a painted paper plate.
用胶水把树叶粘在一个图案的纸碟边缘上。
Dilute red food coloring with water and pour onto a damp paper towel on a plate.
将红色食用色素加水稀释后倒在铺有湿纸巾的盘子里，在烤饼干专用印章上面沾上食用色素，然后将印章盖在月饼表面。 重复以上做月饼的步骤把其它月饼做好。
Including paper, ink, plate and fountain solution, respectively, have different functions, and these functions will have a direct impact on the print.
包含纸张、油墨、版材以及润版液等都分别具有不一样的功能，而这些功能将对打印产生直接影响。
This paper gives a new analytical solution of the free vibration of an arbitrary-shaped plate with complex boundary conditions.
本文给出了复杂边界条件下任意形状板的自由振动分析的一个新的解析解法。
This paper presents application of PLC in a plate shearing machine control, and expounds the design the hardware and software of the system in detail.
介绍了可编程控制器(PL C)在自动剪板机控制中的应用，对系统的硬件和软件设计作了较为详细的阐述。
In this paper, the thermal deformation of a plate is measured by Phase shifting laser holography interference.
本文应用相位移激光全息干涉法研究板状结构的热应变。
In the paper, spear lag of beam plated construction and effective distribution width of flange plate are analysed through model test and research. It provides a reference in design.
本文通过大型试验的研究，分析梁板结构截面的剪力滞效应，及翼缘板的有效分布宽度，为设计提供参考。
This paper has studied a lot of method and theory about vehicle plate location, character divide and character recognition systemically.
本文对车牌识别系统的车牌定位、字符分割和字符识别进行了系统的研究。
This paper gives a method of computer aided digitization for map plate-making, introducing its working process and advantages.
本文主要介绍一种采用微机进行地图数字化处理并进行地图制版的方法，阐述了其优越性。
This paper presents an exact solution for a free rectangular plate on elastic foundation by the method of superposition.
本文以叠加法提供在弹性地基上的自由矩形板的精确解。
This paper stresses on introducing the contents and results of a bench-scale experiment of a new type counter current finned plate setter.
本文着重介绍了新型迷宫斜板小型试验研究的内容和结果。
To get the plate resolution, this paper brought a series of exposure on the tested plate through the plate control strip, detected and analyzed the micron line-area on the tested plate.
为了获得印版的分辨率，使用印版质量控制条对被测印版施加曝光系列，检测和分析已曝光印版上的微米线区。
The paper presents an analysis of the axisymmetric bending of a functionally graded circular plate under elastically supported boundary condition.
对周边为弹性支承边界条件下的功能梯度材料圆板轴对称弯曲问题进行了分析。
Prebent combined simple supported beam, combining steel plate with concrete, is a new type beam structure. This paper introduces the basic conception, design and construction of this combined beam.
预弯组合简支梁，是钢板与混凝土相结合的一种新型梁式结构，本文介绍该组合梁的基本构思及设计、施工等内容。
In this paper, according to the kirchhoff's plate continuance conditions, sample plate interpolation for functions, which is a new interpolating method, is constructed.
文章按照弹性薄板的光滑性要求构造样板插值函数，这是一种可普遍运用于各类问题的插值新方法。
This paper makes a detailed analysis on the causes of carly failure of the bed plate spring for the shuttle.
本文对武汉纺织器材厂生产的梭子底板弹簧早期失效的原因进行了全面的分析。
In this paper, an optical-sonde system for measuring the shape of a two-dimensional flying plate and the corresponding data treatment method are described.
本文介绍了一种测量二维形状飞片的光探测系统及其数据处理方法。
This paper introduces a non-contacted measurement method of steel plate based on optical image.
本文介绍一种基于光学影像的非接触钢板测量方法。
This paper presents a curvilinear boundary quadrilateral element for the problem of thin plate of bending with curvilinear boundary.
本文提出了曲边四边形薄板弯曲单元解决曲线边界薄板的弯曲问题。
In this paper, a thin ring plate mode is used, and more exact calculating formula is got for bending of the centrifuger vane.
本文采用环形薄板模型，得到关于卧螺离心机叶片弯曲问题的较为精确的计算公式。
In this paper a new simple boundary element method for solving polygonal thick plate bending problems is proposed.
本文对多边形厚板弯曲问题，提出了一种新的简单的边界元解法。
This paper introduces a ball-and-plate system developed in authors' laboratory. A fuzzy supervisory controller with multilayer control structure is designed aiming at the trajectory tracking problem.
本文介绍了研究室自主开发的板球系统实验平台，针对板球系统的轨迹控制问题设计了两层控制结构的监督模糊控制器。
In this paper, a new structure of the facing plate for the distributor of the hydraulic turbine is advanced by analyzing the abrasion of the traditional facing plate.
本文通过对水轮机导水机构抗磨板传统结构磨损情况的观察分析，提出了一种新结构的抗磨板。
In this paper, we derived a plate motion model based on space geodesy, called SGPMM1, from integrated VLBI and SLR data.
本文组合应用vlbi和SLR数据导出了一个完全基于空间技术实测数据的现时板块运动模型，称为SGPMM1。
This paper proposed a license plate locating method based on section and region shrinkage thinking.
本文提出了一种基于分块和区域收缩思想的车牌定位方法。
This paper presents a method of license plate recognition using gray images.
本文提出了一种基于灰度图像的车牌识别系统。
This paper presents a method of license plate recognition using gray images.
本文提出了一种基于灰度图像的车牌识别系统。
应用推荐