This increases the cost of weaving and tends to make air jet looms less attractive.
织造成本的提高使喷气织机有被忽视的倾向。
The weaving yarn for technical textiles places high demands on air jet weaving machines.
工业用织物的织造对喷气织机提出了很高的要求。
Specificity of air jet yarn and technology measures of each process in spinning is introduced.
介绍了喷气纱的特点以及针对原料特性纺纱时各工序采取的工艺技术措施。
Ignition energy of aviation ignition device is an important parameter for reliable launch of air jet.
航空点火器的点火能量是飞机发动机可靠启动的一个重要参数。
This paper discusses the effects of air jet in the leading edge of propeller on its hydrodynamics and radial noise.
讨论了螺旋桨导边充气对其水动力性能和辐射噪声的影响。
The air jet weaving machine employs the air picking-up, its weaving technology consisting in small shedding and large tension.
喷气织机采用气流引纬，其织造工艺为小开口大张力。
As a high velocity air jet, it supports and straightens the primary air stream and thus prevents slagging on the furnace walls.
作为一股高速射流，它对一次风气流起支撑作用，以防止炉壁结渣现象的发生。
When the process is complete and the material is set, the loose powder is blown away with an air jet to reveal the completed structure.
当制造过程结束，材料凝固，为凝固的粉末被喷气头吹掉，这样，整个的结构就显现出来了。
Discusses the similarity in solutions of air jet, buoyant plume and buoyant jet, and inducts and analyses the available experiment data.
论述了空气射流、浮力尾流和浮力射流的相同、相异性及解法特点，归纳分析了现有实验资料。
Objective: To study the influence of some process parameters on the product granularity in pharmaceutical air jet pulverization process.
目的：研究药品气流粉碎工艺中部分过程参数对产品粒度的影响。
The attenuated law of flow field inside the nozzle block of the air jet vortex spinning is investigated by the method of numerical computation.
通过数值计算对喷气涡流纺喷嘴内部流场衰减规律进行探讨。
The results show that NOx emission was abated when the nozzle with two circle air jet was converted into the nozzle with two rectangular air jet.
研究结果认为：在燃气喷口两侧布置两个矩形空气喷口的烧嘴，氮氧化物排放量低于圆形空气喷口烧嘴；
When an air jet is allowed to expand freely, the moving air is contained within an imaginary cone whose axis is coincident with that of the air jet.
当一股气流自由膨胀时，运动着的气流构成一个假想的圆锥体，其轴线与气流的轴线相重合。
The autocontrol and the process parameters influencing the product granularity by air jet pulverization according to GMP requirements are studied in this paper.
以符合GMP的超细气流粉碎工艺为研究对象，设计了相应的自动控制系统，并探讨了药品超细气流粉碎工艺中部分工艺参数对产品粒度的影响。
It discusses how to utilize systematic engineering to optimize the processes and technical standards of air jet loom, tries to improve the quality and efficiency.
探讨如何运用系统工程，优化各工序工艺和技术标准，提高半成品质量，确保喷气织机的效率和质量。
Ultrafine dolomite powders was prepared with ultrafine pancake air jet mill and ultrafine classification system. The relations among operation factors were analyzed.
采用扁平式超细气流粉碎机与超细离心式空气分级机组成的闭路系统对白云石进行超细加工，分析了操作参数对产品粒径的影响。
The paper introduces the faults of denim weaved by air jet loom, indicates its influence on quality, and analyse the reasons of faults emerged on denim and presents precauction measures.
介绍了喷气织机织造牛仔布产生的疵点，指出其对产品质量的影响。
In 1994, hijackers of an Air France jet reportedly considered crashing the aircraft into the Eiffel Tower.
据报道，1994年，法国航空公司的劫机者曾考虑将飞机撞向埃菲尔铁塔。
The supreme problem of disk air - jet mill in ultrafine pulverization operation is lower utilization of energy.
圆盘式气流粉碎机在超细粉碎作业中最大的问题是能量利用率低。
The quality of is directly influenced by the performance of air-jet loom nozzle, so it is necessary to measure the pressure of air field which is formed by the nozzle.
喷气织机主辅喷嘴性能的好坏直接影响到织机气流引纬的质量，因此了解喷嘴气流场的压力情况十分必要。
The method of add-on torsional spring is used in this paper to optimize the dynamical property of air-jet loom, and the good effect is achieved.
本文采用附加扭转弹簧的方法对国内某一型号的喷气织机四连杆打纬机构进行动平衡优化，取得了良好的效果。
Based on the related features of Richcel fiber, processing technology in producing Richcel fabric on air-jet loom and the attentions are explored in the article, resulted in good production.
根据丽赛纤维的相关性能，对在喷气织机上织造丽赛纤维织物的织部各工序工艺及注意事项作了探讨，取得了较好的效果。
To produce join stitch fabric which is combined plain weave with stain in single loom bean air-jet loom, higher demand for yarn strength and evenness CV were proposed.
为了在单织轴喷气织机上顺利生产平纹加缎纹条联合组织织物，对纱线的强力、条干CV等方面提出了更高的要求。
This paper analyses the reason of filling stop motion of air-jet loom and introduces some methods in adjustment and operation.
分析了喷气织机纬向停台的原因，介绍了与之相关的调整方法及操作方法。
On the basis of absorbing imported air-jet spinning ceramic noxxle, the design and manufacture process of domestic TJS-1 air-jet spinning ceramic noxxle is described in this paper.
本文论述了在消化吸收进口喷气纺纱喷嘴的基础上，进行国产化TJS—1型喷气纺纱喷嘴的设计与研制过程。
These results will be compared with different yarn properties and settings of the air-jet weaving machine.
结果表明，随着织机参数设置精确性的提高，所需的压缩空气量减少。
According to analyse the effect factors of vertical view warp line end end view warp line on air-jet looms, the author gives a set up principle of them.
通过对影响喷气织机顶向和侧向经位置线的因素的分析，得出喷气织机经位置线设定的原则。
The over feed and feeding method in air-texturing, the differential shrinkage rate and average shrinkage in differential shrinking can affect the CV value of air-jet textured yarn remarkably.
空气变形加工工艺参数中的超喂率和喂入方式，异收缩变形加工工艺参数中的异收缩率、平均收缩率对成纱的条干CV值有显著影响。
Using two types nozzle newly developed, the authors succeeded in spining a series of bast-fibre-blend air-jet yarns.
作者用自行设计的两种型号的喷嘴成功地纺制了一系列含麻纤维喷气纱。
The problems existed in the process of weaving two-stretch elastic fabric on air-jet loom are analyzed, and the solutions are presented.
文章分析了喷气织机在织造双向弹力织物时，各工序应注意的问题及解决措施。
应用推荐