Electric arc welding or cutting is performed.
电焊或电切割时。
Pipe arc welding robot is one of the advanced devices.
管道弧焊机器人就是其中一种较为先进的设备。
Argon arc welding of copper alloys and surfacing of steel.
铜合金氩弧焊及钢的堆焊用。
Electrode for arc welding consists of the core and the coat.
电弧焊的焊条是由焊芯和药皮两个部分组成的。
It gives a reference to automatic arc welding tracking technique.
为电弧焊的自动跟踪技术提供参考。
AN arc welding robot control system based on CAN bus is introduced.
介绍了一个基于CAN总线的弧焊机器人控制系统。
A new type of rapid shaping by means of arc welding was introduced.
介绍了一种新型的快速成形方法——利用焊接电弧进行成形。
The achievement is in the lead of arc welding automation in the world.
研究成果在国内外弧焊过程自动化方面处于领先地位。
It is perfect phase trigger circuit for arc welding power source of SCR.
该相控触发电路是晶闸管整流弧焊电源的理想触发电路。
Products are mainly used for arc welding, argon arc welding and other fields.
产品主要用于电弧焊、氩弧焊等领域。
Gas metal arc welding (GMAW) is the main welding method in welding production.
熔化极气体保护焊(GMAW)是焊接生产中常用的焊接方法之一。
The definitions of welding pose parameters of arc welding robot were discussed.
讨论了弧焊机器人焊接位姿参数的定义。
The manual arc welding normally refers to the manual welding using coated electrode.
手工电弧焊通常是指采用药皮焊条的手工焊接法。
The problems of the peculiarities of arc welding and the estimation of weld quality are discussed.
主要考虑了弧焊特性的提取以及焊接质量的估计。
Fracture toughness of both shielded metal arc welding and gas metal arc welding is almost the same.
焊条电弧焊焊缝的断裂韧性与气体保护焊焊缝的断裂韧性相当。
This paper analyzes the common breakdown of submerged arc welding machine and parameters' adjustment.
继续分析了自动埋弧焊机的常见故障和相关参数调整。
Equipments for manual arc welding consist of power source, current regulator, electrode holder and cables.
手工电弧焊的设备包括焊接电源、电流调节器、焊钳及电缆线。
Therefore, it always has good welding properties when carrying out manual arc welding at different position.
因此在各种不同位置进行手工弧焊时，均有良好的焊接性能。
The established equation provides a theoretical foundation for the study and application of CO_2 arc welding.
文中所建的表达式，为CO_2电弧焊的研究和应用提供了理论依据。
Helium is used for arc welding and leak detection, mostly, although NASA USES it to pressurize space shuttle fuel tanks.
虽然美国宇航局用它来给航天飞船的燃料箱加压，氦主要还是用来做弧焊和裂纹检测。
Pulsed arc welding power source by thyristor DC chopper consists of common DC arc welding power source and DC chopper.
采用晶闸管直流斩波器的脉冲弧焊电源是由普通的直流弧焊电源，附加晶闸管直流斩波器组成的。
Two cores melting speed can keep consistence is very important for twin electrode single arc welding to be stabilized.
两焊芯熔化速度能否保持一致是双电极焊条单弧焊过程能否稳定进行的关键。
This article chiefly introduces the adjustment of demonstration program of arc welding robot after occurring collision.
在此主要介绍了弧焊机器人在发生撞枪后的一些重新调整示教经验。
In this paper, the method integrating CPV350 inverter welding machine to arc welding robot control system is introduced.
介绍了CPV350型逆变电焊机与弧焊机器人控制系统的连接方法。
The process investigation on hybrid YAG - MAG laser arc welding of austenite stainless steel is systematically developed.
针对奥氏体不锈钢材料，系统地开展了YAG-MAG激光电弧复合焊工艺研究。
This work may be as a useful tool for the understanding of the parameters matching and process optimization in plasma arc welding.
本文的工作对于等离子弧焊接工艺参数的匹配及其过程的优化有重要的指导意义。
The system can not only be used in pulse plasma arc welding, but also can be used in penetration controlling in plasma arc welding.
该系统不仅可以进行脉冲等离子弧焊接，而且可以实现脉冲等离子弧焊接的熔透控制。
Connect the ground connection of the electric arc welding equipment as near as possible to the welding point on the part to be welded.
将电弧焊设备上的接地连接尽可能近地连接到将要焊接零件的焊接点上。
Connect the ground connection of the electric arc welding equipment as near as possible to the welding point on the part to be welded.
将电弧焊设备上的接地连接尽可能近地连接到将要焊接零件的焊接点上。
应用推荐