Store the quicklime and gypsum in the tank after crushing and ball milling.
生石灰、石膏经过破碎、球磨后进入料仓储存待用;
The optimal processing parameters of ball milling have been obtained by experiments.
通过实验获得了最佳球磨工艺参数。
Some key factors influencing the efficiency of ball milling were discussed in the paper.
对球磨过程中的一些关键的影响因素进行了分析。
The influence of ball milling time on hydrogen storage performance was also investigated.
研究了材料的组成和球磨时间对吸放氢性能的影响。
Results show that hydrate characteristics of steel slag were increased after ball milling.
结果表明:钢渣经过球磨之后,其水化性能大大提高;
The results showed that tapioca starch granules can be effectively micronized by ball milling.
结果表明机械球磨方法能有效地使木薯淀粉颗粒微细化。
Barmac grains and ball milling grains are brown corundum grains from different granulating process.
巴马克砂与球磨砂是制粒工艺不同的棕刚玉砂。
The amorphous forming relates with variety of the crystal size, defect and stress during ball milling.
此非晶合金的形成是晶粒细化、球磨过程中的缺陷和应力等多种作用的结果。
Influence of process control agent in preparation of SiC/Al composite powder by high energy ball milling;
高能球磨法是制备超细粉体的一种重要方法,但对不同的材料,制备粉体所需的工艺区别较大。
Methods of leuco-oxidizing, solvent treating, ball milling and acid treating are used for pigmentation of Vat Blue RS .
还原蓝RS颜料化主要采用了隐色体氧化法、溶剂处理法、球磨法和酸处理法。
The effects of the mechanical ball milling on the microstructure and the performance of the composite were investigated.
研究了机械球磨对热挤压坯料组织和性能的影响。
The preparation process of KBF_4 nano powders by high energy ball milling and their :influencing factors have been studied.
探讨了高能球磨法制备纳米KBF_4粉末的工艺过程及影响因素。
XRD analysis revealed that MgO was not formed during ball milling of the magnesium alloy powder under the protection of ethanol.
将镁合金切屑在无水乙醇的保护下进行球磨,XRD分析显示镁合金粉末经过球磨没有被氧化。
It is prepared through mixing the materials, ball milling, calcining, crushing, pelletizing, forming, sintering and other steps.
将上述组份经过称量、混合球磨、煅烧、粉碎、造粒、成型和烧结等固相反应工序烧制成微波介质陶瓷。
The atomized powder was improved by high-energy ball milling, then the radar absorbent of flattened magnetic alloy powder was made.
采用气雾化法获得的合金粉,通过高能球磨处理工艺制备了扁平化磁性合金粉体雷达波吸收剂。
Properties and morphology of thermites mixed up by twin-screw and ball milling procedures are investigated with different mixing time.
采用双螺旋和球磨两种混料方式,研究不同混料时间对(铝)热剂性能及颗粒微现形态的影响。
This suggests that increasing the ball milling rotation speed can promote the alloying efficiency and decrease the consumption of time.
这说明增大球磨转速可以提高球磨效率,缩短耗时。
The present invention is surfactant aided high energy ball milling process for preparing nanometer Cu-In-Se (CIS) material for solar cell.
表面活性剂辅助的高能球磨法制备纳米铜铟硒太阳能电池材料,涉及一种制备纳米铜铟硒(CIS)太阳能电池材料的新方法。
The observation results of SEM and MS2000 indicate that cold welding, fragmentation and work harden occurred during high energy ball milling.
SEM和MS2000分析结果表明,高能球磨中存在冷焊、断裂和加工硬化现象。
Spheroidal graphite cast iron and graphite are chosen as raw material separately, ball milling method is used to fabricate carbon microspheres.
分别以球墨铸铁和石墨为原料,采用机械球磨法成功制备了碳微球。
Potato starch was mechanically ground by ball milling. The rheological properties of differently micronized products were studied by rheometer.
通过机械球磨对马铃薯淀粉进行粉磨,采用流变仪研究了马铃薯淀粉及其不同微细化程度产物的糊的流变特性。
Abstract :Graphene oxide/copper (GO/Cu) composites were successfully synthesized through the ball milling and vacuum hot press sintering process.
采用球磨和真空热压烧结方法成功制备氧化石墨烯/铜复合材料。
The electrophoretic particles of phthalocyanine Green G and Hansa yellow 10G which were modified with hyperdispersants were prepared by ball milling.
以酞菁绿G、汉沙黄10G为原料,以超分散剂为改性剂,通过球磨制备电泳粒子。
The feasibility of the preparation of nano-scale quartz powder by high energy ball milling is demonstrated through an analysis of experimental result.
通过对实验结果的分析,论证了高能球磨法制备石英纳米粉的可行性。
The morphologies of composite powders are affected remarkably by milling methods, and the high-energy ball milling definitely reduces the particle size.
球磨方式对复合粉末的形貌有显著影响,采用高能球磨对粉末的细化作用明显。
The sequence of the factors was determined by orthogonal experiments: ball gradation, milling rotational speed, ball milling time, and ratio of ball to powder.
正交试验表明四个因素的主次顺序为:磨球级配、球磨机转速、球磨时间、球料比。
The evolution of structure of the powder during ball milling was studied by XRD and SEM and microhardness of the powders milled for different time was measured.
利用X射线衍射仪、扫描电镜研究了球磨过程粉末的显微组织结构,测量不同球磨时间粉末的显微硬度。
The main influence factors of preparing molybdenum copper nano-powder by high-energy ball milling were studied; the morphology and size of powders were analyzed.
研究高能球磨法制备纳米钼铜复合粉末的主要影响因素,通过扫描电镜和透射电镜分析粉末的形貌及颗粒尺寸。
The methods of thermal spray and mechanical ball milling are combined in this paper and a new method of preparation of Cu-Zn ultrafine powders is brought forward.
本文将热喷涂法与机械球磨法相结合,提出一种新的超细铜锌粉末的制备方法。
The project made studies on the manufacturing process of the bright nanometer Ag powder, and fixed the process route of chemical reduction-mechanical ball milling.
本项目对纳米光亮片状银粉的制备工艺进行了研究,确定了化学还原—机械球磨的工艺路线。
应用推荐