Mg alloy; electroless plating; bond strength.
镁合金；化学镀；结合强度。
And this turns out to have a bond strength of 435 kilojoules per mole.
这证明有每摩尔435焦的，的共价能。
The bond strength between corroded deformed bars and concrete is studied.
对锈蚀变形钢筋与混凝土之间的粘结力进行了研究。
Xeno III Adhesive provides bond strength comparable to total etch systems.
异种三胶粘剂粘结强度可比提供总额蚀刻系统。
The bond strength adhesive tape for repeatability of test results is critical.
胶带的粘合强度对于测试结果的可重复性非常关键。
Moreover, 27 small cube concretes are investigated to the bond strength per area.
此外，还进行了单位粘结面积上粘结强度的试验，共27个小试件。
The shear bond strength decreased while the concentration of NaF was higher than 3%.
当氟化钠浓度高于3%后，托槽的抗剪粘接强度下降。
Influence of Storage Methods on Microtensile Bond Strength of Dentin Adhesive System.
离体牙储存方式对牙本质粘结系统微拉伸强度的影响。
The bond strength between bone and titanium coatings was also measured by push-out test.
涂层与骨组织之间的结合强度用推出实验进行测量。
The bond strength of polymer(PAE) cement mortar with double booked steel fiber is the highest.
聚合物水泥砂浆与双肢钢纤维的粘结强度最大。
With same material and technics, bond strength of parallel lay-up is higher than upright lay-up.
材料和工艺相同时，顺纹组坯时的胶合强度高于垂直纹理组坯时的胶合强度。
Objective To compare the shear bond strength of light cured and chemically cured resin adhesive.
目的对光固化和化学固化树脂粘接剂的剪切强度进行对比研究。
Results show the pretreatment of basal body of magnesium alloy is important to the bond strength.
结果表明，镁合金基体的镀前处理对镀层的结合强度至关重要。
The resin fast permeability, infiltration of good products can improve bond strength between layers.
该树脂渗透性快，浸润性好，可提高制品层间粘结力。
The bond strength between AFRP belts and concrete was higher than that between steel bars and concrete.
而纤维带与混凝土之间的粘结性能要强于普通钢筋。
Insulating ability and peel bond strength are two important properties for thermal insulating covering.
保温性能和剥离强力是保温被两个非常重要的性能指标。
In addition, the ultimate bond strength decreases with the increase of anchorage length and bar diameter.
此外，极限粘结强度也随着锚固长度、钢筋直径的增大而减小。
Both of these applications require adequate bond strength of composite resin to the surface of porcelain.
通常各类全瓷修复体应用粘结性树脂粘固于牙体表面。
This energy level diagram helps us understand the relationship between electron filling and bond strength.
能级图能帮助我们，理解电子填充，和键强的关系。
Conclusion Self-curing hydrogel lining material has a very high bond strength, but partly affected by water.
结论自凝水凝胶软衬材料具有很高的粘结强度，但水对其有一定影响。
Moreover, it has other merits, such as high bond strength, innocuity, insipidity and no atmosphere pollution.
同时它还具有粘结强度高、无毒、无味、无大气污染等优点。
Adhesive for leather and footwear materials. bond strength. minimum requirements and adhesive classification.
皮革和制鞋材料用胶粘剂。粘结强度。最低要求和胶粘剂分类。
The results show that the methods maintain the original properties and increase coating-substrates bond strength.
结果表明，该方法既可保持涂层原有性能，又可增加涂层-基体间结合强度。
In this paper, an improvement example of die shear strength and bond strength of a microwave module is introduced.
本文介绍了某微波组件芯片剪切力和键合强度的改进案例。
The bond strength between the coating and substrate can be enhanced through producing functionally graded coating.
通过制备梯度涂层可以提高涂层与基体之间的结合强度。
So what we can actually directly compare is the dissociation energy or the bond strength of nitrogen versus hydrogen.
因此实际上我们可以直接进行比较，对氮分子与氢分子的离解能，或键的强度。
Bending strength, compressive strength, interfacial bond strength and frost-resistance were also studied and analyzed.
并对其抗压、抗折、新老界面粘结强度及抗冻性等进行了实验研究。
Secondly, Neural Network model was built up to predict ultimate bond strength between the rebar and corroded concrete.
其次，建立了受腐蚀钢筋混凝土极限粘结力的神经网络预测模型。
The results show that the interfacial bond strength of different embedding lengths in M30 mortar almost is a constant 3.
试验表明：在M 30砂浆中，纤维不同埋置长度的界面粘结强度基本为一常数3。
The factors influenced the hydrogen bond strength was discussed. The hydrogen bond energy in polypeptides was estimated.
探讨影响氢键性质的主要因素，并对氢键键能进行了初步估算。
应用推荐