The equations can be conveniently solved by numerical method.
该方程组可以用数值方法方便地求解。
Corresponding energy and chemical potential are also worked out by numerical method.
并且，通过数值模拟我们计算了不同原子数的能量和化学势。
The effect of axial heat conduction on a heat transfer pipe is analyzed by numerical method.
通过数值计算方法对传热管轴向导热的影响进行了分析。
The turbulent flow in 2 D mixed compression supersonic inlet is simulated by numerical method.
对二元混压超音速进气道湍流流场进行了数值模拟。
By numerical method, the fin efficiency curves for X-type two-side strip fin surfaces were achieved.
通过数值模拟得出了X型双向开缝翅片的效率计算曲线。
The aerodynamic field for Venturi oil-burner with a intake swirler is simulated by numerical method.
针对带入口旋流器的新型文丘利调风器流场的数值模拟，提出了一种分析模型和处理方法。
The discrete equation was deduced by control volume integral method, and realized by numerical method.
用控制容积积分法导出了离散方程，并用数值方法进行了求解。
This paper presented several methods for establishing the model of composite structure by numerical method.
本文简要介绍了复合材料结构的数值计算模型的建立方法。
Objective To study hemodynamics in 3D microvascular networks and interstitium of solid tumor by numerical method.
目的数值研究实体肿瘤内外三维微血管网及间质内的血液动力学。
The processes of the combustion and flow and the movement of the lifting device were simulated by numerical method.
通过数值方法模拟了燃气发生器内部的燃烧和流动以及提升机构的运动过程。
In this paper, the blade optimization effect has been investigated by numerical method under the condition of unsteady flow.
本文对叶型优化在非定常流动条件下的效果进行数值研究。
The distribution of the temperature field and flow field in longitudinal-flow heat exchanger is explored by numerical method.
采用数值模拟方法，研究了纵流式换热器和折流板式换热器流场和温度场的分布。
The aerodynamic characteristics of an airfoil with a jet issuing from its lower surface are investigated by numerical method.
应用数值方法模拟了飞行器升力面下表面喷气的增升作用。
In this paper, the flow field of the supersonic diffuser and the subsonic-supersonic ejector is simulated by numerical method.
本文采用上述数值算法模拟了超声速扩压器和超声速引射器内流场。
The influence of tip clearance on the performance of fan rotor has been investigated by numerical method at different clearances.
在不同叶尖间隙下，对高负荷风扇转子的特性进行了研究；通过数值方法分析了叶尖间隙对转子特性的影响。
In the photoisomerized polymer, the perpendicular and all-optical control of optical spatial soliton is simulated by numerical method.
用数值方法研究了在具有光致异构非线性的聚合物中光学空间孤子的垂直全光调控。
By applying theory of heat transfer, a melting model of material filament in liquefied pipeline is built and solved by numerical method.
应用传热学理论，建立材料丝在液化管中的熔融模型。采用数值解方法，求出该模型的解。
The mathematical model was established and it was calculated by numerical method, the speed vectors on each dispersed point was obtained.
并通过建立数理模型，数值求解，得到各个离散节点上的速度矢量。
The complex heat transfer of turbulent natural convection combined with surface radiation in open cavities is analyzed by numerical method.
用数值方法分析了开口空腔中的湍流自然对流与表面辐射相互耦合的复杂传热。
Gas-flow and heat-transfer in the wedge-shape air-gap of horizontal evaporation cooling motor is studied by numerical method and experiment.
本文通过数值和实验手段研究了卧式蒸发冷却电机楔形气隙中的流体流动、传热现象。
The mechanical parameters were then used to compute, by numerical method, the displacements of the rock mass surrounding every stope in the block.
并应用反演结果对该采场各矿房围岩的变形进行了模拟计算；
The algorithm applies to both enhancement (e -) and depletion (d -) MOS and the strict solution of Poisson's equation by numerical method is avoided.
这种算法对增强(e-)和耗尽(D -)型MOS器件都适用，且避免了对泊松方程的严格数值求解。
The cross- section curvature ductility ratio for R. C inequiaxial T - shaped, L - shaped and cress - shaped columns is calculated by numerical method.
采用非线性全过程数值分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。
The seal capacities are computed by numerical method. The effects of the ferrofluid quantity and the rotating speed on the seal capacity are discus...
对静止和旋转密封进行了数值计算，分析了磁性流体量和转速对密封能力的影响。
The seal capacities are computed by numerical method. The effects of the ferrofluid quantity and the rotating speed on the seal capacity are discussed.
对静止和旋转密封进行了数值计算，分析了磁性流体量和转速对密封能力的影响。
The transfer function of the earthquake response of the complicated structures is computed by numerical method using deterministic complex response analysis.
借助于复反应分析技术，用确定性方法求得复杂结构的离散传递函数曲线。
The stiffness coefficients of piles have been calculated by numerical method and duly employed in the matrix analysis of pile foundations as space structures.
利用主解系数等方法导出了桩轴向、横向及扭转刚度系数的通用算法并用于桩基作为空间结构的矩阵分析。
Finally, the multiple control points model for multiple degree of freedom vibration modes was analyzed by numerical method and the selection of number of c...
最后，对多振型多点控制模型进行了数值分析，并探讨了选择控制点个数和位置的方法。
Based on thermodynamics and considerations of the influence of arc, the equations to express the behaviour of gas flow with the arc is solved by numerical method.
根据热力学理沦并考虑到电弧的作用，运用数值运算方法对灭弧室气流的解析方程进行了计算。
Simulating the temperature field of a rocket motor (including propellant) by numerical method is an effective way to get real-time temperatures of the rocket propellant.
对火箭发动机(包含发射药)的非稳态温度场进行数值模拟是确定火箭发射药实时温度的一种有效方法。
应用推荐