The application of electro-hydraulic servo system to the tilting car body structure is discussed.
就电液伺服系统在可倾车体结构中的应用进行了讨论。
By car body structure stiffness analysis, can guide the car design engineers to optimize the structure of the body.
对轿车车身结构进行刚度特性的分析，汽车设计工程师们以分析的结果作为车身结构优化设计的依据。
This paper describes how the finite element methods can be used for analysis and evaluation of passenger car body structure.
本文简述了用有限元法对轿车车身结构进行分析与评价。
The white car body structure of the static stiffness of the field of computing has been valued by domestic and foreign automobiles industry.
国内外各大汽车公司对轿车白车身的结构静态刚度分析计算一直非常重视。
The computation analysis shows that the car body structure design is reasonable and meets the locomotive general (arrangement) and relevant national standards for (locomotive) static strength.
最后通过计算分析，校验说明该车体结构设计合理，满足了机车总体布置和国家相关标准对机车静强度的要求。
This makes some of the work for the design of car body structure of active wheel electric vehicle in the future. It also gets some guidance data in use of magnesium alloy material for reference.
本文所作的一些工作为以后的轮毂式电动汽车的车身结构设计提供了一些参考，并在采用镁合金材料上得出一些指导性的数据供参考。
This paper describes how the finite element methods can be used for analysis and evaluation of passenger car body structure. The method also suits to body structures of other types of motor vehicles.
本文简述了用有限元法对轿车身结构进行与评价，也适用于其它类型车身的结构分析。
Thirty years ago, the firm was the first to introduce a Formula 1 car that had a carbon monocoque (a body structure that also works as a chassis).
30年前，迈凯轮首先将全碳纤维车架(也用于底盘)引入F1赛车。
This paper conducts finite element analysis on the body structure of a city passenger car with low entrance recently developed by certain company.
文章对某公司最新开发的低入口城市客车车身结构进行了有限元分析。
The type B120 metro vehicle aluminum car body is overall load bearing structure, which is mainly made from large aluminum extrusions connected by welding.
B120型地铁铝合金车体为整体承载全焊接结构，主要采用大型中空铝合金型材组焊而成。
The analysis of the stiffness and modal characteristics of car body is the guidance for optimization of car structure.
对轿车车身进行刚度、模态特性的分析，可以指导人们对车身结构进行优化。
The traditional structure design method of car body based on the statistical, analogy and experience mainly focuses on the static properties of car body, taking no account of dynamic properties.
传统的车身结构设计多采用统计、类比和经验的方法，主要关注车身的静态性能，而对动态特性考虑较少。
The bodywork structure is the main load-bearing body in a well car, and its design quality will directly influence the well car.
车体是落下孔车中的主要的承载件。其设计的优劣将直接影响落下孔车的性能。
Widely absorbed some new advantages of mechanical structure fatigue of the domestic and abroad, lots of researches on fatigue problem of locomotive car-body has been done in this thesis.
本文在广泛吸取国内外机械结构疲劳问题的研究成果的基础上，对某型机车车体结构的疲劳问题的研究进行了大量的工作。
Rigid-Elastic Coupled Model of full vehicle, Acoustical-Structure Interaction Model of car body and Irregularity model of road are built using the technique of Virtual Proving Ground.
借助于虚拟试验场技术建立了用于车内噪声评价的整车刚弹耦合模型、声固耦合车身模型和不平路面模型。
With common modal test method of structure, a modal test is carried out in some locomotive car body steel structure.
文章主要介绍了一种比较常用的模态试验方法和某型电力机车车体钢结构模态试验。
The body performance is very important part of the general performance of the car. The performance of car body is determined by the static and dynamic characteristics of its structure.
车身的性能是整个轿车产品性能非常重要的组成部分，轿车车身的性能主要取决于结构的静态、动态特性。
Described are the fundamental structure and performance of the air spring rising type car-body tilting system of N700 series EMUs for Shinkansen in Japan.
介绍了日本新干线N700系电动车组空气弹簧上升式车体倾摆系统的基本结构和性能。
Described are the technical parameters, main structure, performance features and testing, operation of the TD type Monorail car-body special transport car.
介绍了TD型单轨车体运输专用车的技术参数、要结构、能特点以及试验、用等情况。
The results show the effective dissipation of the crash energy and the ordered deformation of the car-body structure, so that the reasonability and feasibility of the design are verified.
结果表明了撞击能量的有效耗散和车体结构的有序变形，验证了设计的合理性和可行性。
It can be seen from the analysis that the mixed structure car-body is feasible no matter from the technical points or from the economical points.
通过分析可知，无论从技术角度还是从经济角度看，混合结构车体都是可行的。
The main objective of this research is to explore a method how to solve the fatigue design problem of the locomotive car-body structure.
此项研究的主要目的在于探索机车车体结构疲劳设计的解决方法。
We set the thickness of the shell elements of the welding parts of the steel structure of the car body and its sheathings, such as side wall sheathing, as the sum of their thickness.
通过设置不同部分壳体单元的不同厚度，巧妙地处理了车体钢骨架与车体侧墙板及其他各种板件的焊接关系。
The car-body structure is analyzed, checked and revised with the ANSYS analysis software.
用ANSYS分析软件对车体结构进行了分析、校验和修改；
Morris Oxford car garage sales, and accumulated a large amount of money, as well as his auto-body parts of the structure has a profound understanding of comparison.
莫里斯车库在牛津的汽车销售情况良好，并积累了大量的资金，他对汽车车身以及零件的构造有了比较深刻的了解。
The utility model discloses a drive cable quick fastening structure for a fitness car, which comprises a base body and an overhead element;
本实用新型公开了一种健身车的传动索快速扣接结构，包括座体及倒勾元件；
The utility model is reasonable in structure and the car body shape can be changed into different types of car bodies when needed.
本实用新型结构合理，车身的形状可根据需要改变，而成为不同形式的车身。
At last, combining the characteristics of injury in pole side impact, improve corresponding structure of the car body, and improved the side impact safety of vehicle to some extent.
最后，结合仿真中得出的侧面柱碰伤害的特点，对车体结构进行相应的改进，一定程度上提高了车辆的侧碰安全性。
The structure of a car body is improved with the structure of magnesium alloy to lightweight the car body.
采用镁合金结构对某轿车车身前端进行轻量化的改进设计，显著降低了车身质量。
The structure of a car body is improved with the structure of magnesium alloy to lightweight the car body.
采用镁合金结构对某轿车车身前端进行轻量化的改进设计，显著降低了车身质量。
应用推荐