Silicon steel is one of the most potential steel grades that can be produced with twin roll strip casting process.
硅钢是双辊薄带连铸工艺最具开发潜力的钢种之一。
The mechanical properties of the material are closely related to the chemical composition, heat treatment and casting process.
该材质铸件的力学性能与化学成分选择、热处理工艺和铸造工艺密切相关。
The near net shape thin strip casting process, a competitive new technology, can simplify procedure, save energy, reduce energy consumption and cost.
近终形薄带连铸是钢铁工业简化工序、节能降耗、降低成本最具有竞争能力的一项重大新工艺技术。
Strengthening controls of material quality and continuous casting process played an important role in preventing the formation of longitudinal corner cracks.
加强原材料的质量控制和连铸工艺过程的控制对防止铸坯产生角部纵裂纹有着重要作用。
Crystallizer sealing rope is used before casting process.
结晶器密封绳在炼钢开浇前使用。
Magnesium has performance superiority of casting process and engineering application.
镁合金具有优越的压铸工艺性能和工程使用性能。
The low-pressure casting process and die design for automobile housing were introduced.
介绍了汽车壳体零件低压铸造工艺与模具设计。
The optimization of casting process design was made by means of feedback achieved by FEM.
通过有限元模拟的反馈信息进行了铸件凝固工艺的优化设计。
The molten steel temperature is one of important parameters of continuous casting process.
连铸钢水温度是连铸生产工艺的重要参数之一。
The cast-penetration process with a tellurium coating is a useful special casting process.
碲涂料铸渗工艺是一项经济实用的特种铸造工艺。
A new kind of fuzzy control is proposed for mold level control in continuous casting process.
对连铸过程结晶器液面控制提出一种新的模糊控制方法。
The ingot alloy quality and casting process influence directly the casting metallurgy quality.
精铸合金锭的质量及铸件铸造工艺直接影响铸件冶金质量。
The centrifugal casting process of high aluminum-zinc alloys was investigated through products.
结合产品试验了高铝锌基合金的离心铸造工艺。
With the fabricated preforms, the pressure casting process of porous aluminum alloy was studied.
利用所制备的预制块，研究了多孔铝合金的加压铸造工艺。
Equipment used in a casting process includes furnaces, mold-making machinery, and casting machines.
铸造工艺中使用的设备包括熔炉、铸型制作机械和铸造机械。
In the casting process of ceramic, the key to the technology is how to control the slurry properties.
在陶瓷注浆成形中，如何控制泥浆性能是工艺上一个关键问题。
In continuous casting process, secondary cooling zone (SCZ) has significant influence on slab quality.
在连铸生产过程中，二冷段是影响铸坯质量的重要环节。
The rapid manufacturing for metal parts can be realized by SLS prototyping combining with casting process.
结合SLS快速成形和铸造工艺可以实现金属零件的快速铸造。
Modelling of the strong-coupled temperature and draught pressure during roll-casting process is discussed.
探讨了铸轧过程强耦合的温度场与轧制压力建模。
Plaster mould precise casting process was used to manufacture zinc-base alloy mould for plastic wares production.
介绍一种用于制造塑料制品生产用锌合金模具的石膏型精密铸造工艺。
A variety of protective casting process have been developed for decreasing defect on killed steel bloom sur-face.
为了减少镇静钢钢锭(坯)表面缺陷，出现了各种类型的保护浇铸技术。
CAE analysis and orthogonal design are applied in aluminum alloy housing die-casting process optimization design.
采用CAE方法和正交分析法对铝合金支架压铸件的压铸工艺进行了优化设计。
The casting process and reverse osmosis (RO) properties of hydroxy-propyl cellulose acetate (HPCA) membrane were studied.
研究了羟丙基醋酸纤维素反渗透膜的制膜工艺和膜性能。
It is hard to build a precise math model for counter-gravity casting process for its time lag, uncertainty and complexity.
由于反重力铸造过程的时滞性、不确定性、复杂性，难以建立精确的数学模型。
Analysis of hot spot resulting from core during casting process was conducted by ANSYS software aiming at the boss hot spot.
以凸台型热节为对象，采用ANSYS软件对铸造过程中由于型芯形成的热节进行分析。
By applying the stack casting process obtained through computing and designing, the problems above were successfully solved.
通过在高铬铸球的生产中采用叠铸工艺，成功地解决了上述问题。
Pattern inspection: the pattern inspector should examine the pattern as per casting process drawing after pattern completion.
模具检验：模具制作完毕后，由模具检验员按照铸造工艺图对模具进行检验。
The paper analyzes characteristics of tundish refractory, and raises suitable baking rules of CCM tundish in casting process.
文章对中包用耐火材料的特点进行了分析，提出适合连铸工艺生产的中包烘烤制度。
When low alloy steel replaced carbon steel castings, a series of questions were uncovered in traditional sand casting process.
铸钢材质升级为低合金钢后，传统的砂型铸造工艺在生产中暴露出了一系列问题。
When low alloy steel replaced carbon steel castings, a series of questions were uncovered in traditional sand casting process.
铸钢材质升级为低合金钢后，传统的砂型铸造工艺在生产中暴露出了一系列问题。
应用推荐