The driving schedule generator with optional output has been designed for CCD camera.
在分析了CCD器件驱动时序关系的基础上，设计了可选输出的驱动时序发生器。
The system mainly consists of lighting lamp, reflecting prism, CCD camera and driving unit.
该系统主要由照明光源、反射锥镜、CCD相机和驱动机构组成。
Aim to describe accumulating frames characteristics of CCD camera as a night vision detector.
目的研究CCD摄像机作为微光夜视探测器的帧累积特性。
The CCD camera is extensively used in many fields due to high sensitivity and small size, etc.
由于CCD摄像机具有灵敏度高、体积小等特点，其应用领域日益广泛。
The measuring system consists of a laser diode, an optical ring pattern generator and a CCD camera.
测量系统主要由半导体激光器、环形光发生器以及CCD摄像机组成。
Cross semiconductor laser and CCD camera are used to set up a vision inspection system in this paper.
本文使用十字线激光器，配置CCD相机组成十字线结构光视觉测量系统。
The reliability and the ability of anti irradiation of CCD is concerned in the lifetime of CCD camera.
CCD器件的可靠度及耐辐照能力关系到CCD相机的工作寿命；
This paper is based on ideal pin-hole imaging model and researches the distortion problem of CCD camera.
本文以理想针孔成像模型为基础，对CCD摄像机的径向畸变问题进行了系统研究。
Combining the interface design of CCD Camera System, the application of serial communication is introduced.
结合CCD相机系统的接口设计，介绍了串口通讯的应用方案。
A construction of single CCD camera large view field measurement system and its tests are briefly introduced.
介绍了单个CCD摄像机大视场测量方法系统的搭建及测试情况。
The device comprises a CCD camera, an image collecting card, a control circuit, a fixing device and a computer.
包括CCD摄像机、图像采集卡、控制电路、固定装置和计算机。
Three-dimensional measurement of the size of a moving hot steel slab using an area-array CCD camera is proposed.
首次提出用一台面阵CCD摄像机测量运动高温钢坯的三维尺寸。
The system chiefly consists of a confocal microscope, a CCD camera, testing stages, image grab card and a computer.
该系统主要由同轴显微镜、CCD摄像头、检测平台、图像采集卡和计算机组成。
The modulation transfer function (MTF) is an important parameter in the performance of the CCD Camera imaging system.
调制传递函数是衡量CCD相机成像系统性能指标的重要参数。
The problems on the CCD sensor to be improved and the optimized index of the CCD camera technique functions are discussed.
讨论了CCD传感器需改进的几个问题和CCD摄像机技术性能的优化指标。
The calculation method of CCD camera system and the essentials of digital image processing software design are introduced.
重点介绍CCD摄象系统设计的计算方法，数字图象处理软件的设计要点。
The CCD camera is used to observe the orientation of eyeball, in order to check whether it moves or not during observation.
用CCD摄像头实时监测眼球位置，判断眼球在测试期间是否移动。
World coordinates of geometric center line of pruned plane was acquired by combination of Ultrasonic sensor and CCD camera.
超声波传感器和摄像机组合可获得修剪平面几何中心线的绝对坐标。
The system's hardware is mainly comprised of a microscope, a CCD camera, a video image card and a precise positioning stage.
硬件系统以显微镜头、CCD、图像采集卡和精密工作台为核心组成。
CCD camera dynamically grabbed image of chestnut conveyed by belt through frame grabber, which triggered by infrared sensor.
板栗由皮带输送到摄像区域，利用红外传感器的触发脉冲控制图像采集卡动态采集板栗图像。
The fingerprint image is taken by a CCD camera, and the digitalized image signal is stored, and then processed by a computer.
该方法用CCD摄像机摄取指纹图像，图像信号经数字化后存入微机并对其进行各种处理。
Objective To improve the image intensifying X-TV system by replacing the light-conduct camera with CCD camera for future usage.
目的：通过采用CCD摄像机取代老化的光导管摄像机，使影像增强电视系统继续发挥作用。
The angle of Moire fringes is obtained by processing on the Moire fringes image, which is captured into computers by CCD camera.
其中莫尔条纹由CCD采集到计算机中，通过对条纹图像的处理来得到莫尔条纹的精确角度值。
We measure PZTs displacement by using CCD camera, picture card, computer and Michelson interferometer that is designed specially.
采用CCD摄像机、图像卡和计算机，结合本文设计的麦克尔逊干涉仪对压电晶体(PZT)的位移曲线进行了测量。
The design of the miniature visible light monochrome CCD camera using the chip of ICX259AL image sensor made in SONY was presented.
介绍了采用SONY的ICX259AL图像传感器芯片的小型可见光黑白CCD相机的设计。
In addition, the radiance theorem is also adopted to establish the energy relationship between the virtual detector and the CCD camera.
此外，光学系统中像的辐射量度定理用来建立虚拟探测器平面与CCD相机平面之间的能量映射关系。
Projection grating measuring technique, which records the measurement results with binocular CCD camera, is a new optical measuring method.
利用双目CCD相机记录的光栅投影测量技术是一种新型的光学测量方法。
The theory based on smoothness constraint restoration is introduced, then the remote sensing image of CCD camera with the method is processed.
文章先介绍了平滑约束复原方法的理论基础，然后用该方法对CCD相机的遥感图像进行了复原处理。
The theory based on smoothness constraint restoration is introduced, then the remote sensing image of CCD camera with the method is processed.
文章先介绍了平滑约束复原方法的理论基础，然后用该方法对CCD相机的遥感图像进行了复原处理。
应用推荐