We adopted the precision cold drawn, honing and polishing to manufacture the precision Slender Shaft (Piston Rod), every technical target is over the national standard.
我公司专业生产精密细长轴(活塞杆)采用精密冷拔、精磨和高精度抛光的先进工艺制造，各项技术指标均符合并超过国家标准。
The stress corrosion of cold drawn prestressed steel wire hasn't been paid full attention to for a long time.
长期以来，冷拉预应力钢丝的应力腐蚀问题并未引起人们的足够重视。
Aluminium and aluminium alloys. cold drawn rod bar and tube. part 8 : porthole tubes, tolerances on dimensions and form.
铝及铝合金。冷拔棒材条材和管材。第8部分：多孔拉拔管尺寸和形状公差。
Experiment results show that removing the surface broken crystal layer of the cold drawn rod can prevent heat treatment induced cracks.
实验结果表明，热处理前去掉冷拉棒表面的碎晶层可以防止它在热处理过程中产生裂纹。
Non welded technology, USES no heat and tubing is all cold drawn, therefore there is no requirement for chemical cleaning, either on site or Offsite.
无焊接管路连接技术的管路都是冷拔的，无需任何加热，因此无论是装置前或装置后，都不需要化学清洁。
It is suggested that the broken crystal layer and microcracks in surface layer of the cold drawn rod is the source of the heat treatment induced cracks.
GH105合金冷拉棒表面存在的碎晶层和其内部的显微裂纹是热处理裂纹源。
The main products are high precision cold-drawn fuel tank, high strength precision cold drawn cylinder tube, precision honing tubes, hydraulic cylinder assembly.
主要产品有高精度冷拔油缸、高强度精密冷拔油缸筒、精密珩磨管、液压油缸总成。
Plymouth Tube COMPANY Description Plymouth Tube is a manufacturer of round and specialty shaped tubing, extruded and cold drawn shapes in Carbon, Alloy, Stainless Steel and Nickel Alloys.
普利茅斯钢管生产圆形与异形钢管以及热挤、冷拔特殊型钢，所生产的钢种有碳钢、合金钢、不锈钢与镍基合金钢。
Professional engaged in the production of various grades of cold-drawn stainless steel seamless steel tubes, all used with the domestic advanced level of processing.
专业从事生产各种牌号的冷拔不锈钢无缝钢管，全线采用具有国内先进水平的工艺加工。
Both amorphous and crystalline polymers can yield and be cold-drawn.
无定形和结晶聚合物两者都能发生屈服并能冷拉伸。
It is proved that the third one is the best for cold-drawn steel tubes at present.
实践证明，第三代磷化剂是目前使用性能最好的一种冷拔钢管磷化剂。
Each wire is galvanized and the cable is covered with a protective coating. The wire for the cable should be cold-drawn and not of the heat-treated variety.
每根钢丝进行了镀锌处理，悬索也要涂上防腐层。用来做悬索的钢丝应是冷拉出来的，不能经过热处理。
Experimental results proves that the theoretical values are close to those measured, so this formula can be used in production of cold-drawn inner fin tube.
实验结果证明，理论计算值与实测值较吻合，因而，该公式可在冷拔内直筋管的生产中应用。
The formula of drawing force for cold-drawn inner fin tube is derived with slab method in this paper.
采用工程法推导了冷拔内直筋管拔制力的计算公式。
As a chronic problem with cold-drawn seamless steel pipes, inner surface scale in the form of lump or powder makes such pipes unsatisfactory to relevant customer requirement.
冷拔无缝钢管内表面的氧化皮始终以块状或粉末状存在，难以满足用户的使用要求。
When the fuel for the heating furnace of Beiman Special steel Corporation was changed from gas to oil, severe carbonization happened on the surface of cold-drawn steel.
北满特钢加热炉由烧煤气改烧油后，冷拔材表面产生严重增碳的现象。
The wire for the cable should be cold-drawn and not of the heat-treated variety.
用来做悬索的钢丝应是冷拉出来的，不能经过热处理。
The experience relationship between fin-height and rough tube wall-thickness for cold-drawn outer-spiral-fin tube is established with many-membered Iinear regression in this paper.
利用多元线性回归建立了冷拔外螺纹铜管凸筋高度与坯料壁厚之间的经验关系式。
This relationship can be used to forecast and control the fin-height of the outer-spiral-fin tube, and it has referenced value for the working-out of the technics for cold-drawn outer-spiral-fin tube.
该关系式可对外螺纹铜管凸筋高度进行预测与控制，对外螺纹铜管冷拔工艺的制订具有参考价值。
The five characteristics of cold-drawn steel industry status are expounded. The countermeasures of industrial readjustment of cold-drawn industry is put forward from six aspects.
分析了冷拔钢材行业现状的五大特点。从六个方面提出了对冷拔行业进行产业调整的对策。
Described in the paper is the processing technique for hi-finish dies for high - precision cold-drawn steel tube.
介绍了用于冷拔高精密钢管的高光洁度模具的加工工艺试验情况。
Both amorphous and crystalline polymers can yield and be cold - drawn.
无定形和结晶聚合物两者都能发生屈服并能冷拉伸。
The main products are: 1, various specifications Cold-drawn seamless steel tubes for mechanical, chemical and other industries.
主要产品分为：1、各种规格冷拔无缝钢管，用于机械、化工等行业。
The circumference adopts galvanized cold-drawn frame or plastic-steel frame.
四周采用镀锌板冷拉型框架或塑钢框。
This paper mainly introduces application of chemical vapour deposition (CVD) technology to the cold-drawn dies and relevant methods to make dies by using this technology.
本文主要介绍化学气相沉积(CVD)技术应用于冷拔模具以及采用该技术的模具在制作过程中的几个问题。
We have professional ranks, strict management, advanced technology and strive to create profiles of cold-drawn quality, professional.
我厂以专业的队伍、严谨的管理、先进的工艺，着力打造型材冷拉精品化、专业化。
New product development and production design, chemical composition of Q175 cold-drawn wire with the low carbon and low silicon are introduced in this paper.
介绍了低碳低硅冷加工用拉丝线材的化学成分、生产工艺设计及新产品开发。
New product development and production design, chemical composition of Q175 cold-drawn wire with the low carbon and low silicon are introduced in this paper.
介绍了低碳低硅冷加工用拉丝线材的化学成分、生产工艺设计及新产品开发。
应用推荐