The shearing machine is one of the most popular single unit equipment in the production of cold rolled steel strip.
剪切机是冷轧带钢生产中使用最广泛的单机设备之一。
The paper introduced the equipment, technology innovation and application situation of the domestic large-scale and high speed continuous annealing line for cold rolled silicon-steel sheet.
介绍了我国设计建设的大型高速冷轧硅钢片连续退火机组工艺及设备装备水平，技术创新及应用情况。
The mechanism of the shear band formation in the high cold rolled BCC metal is analyzed.
分析了冷轧体心立方金属中微带的形成原因。
Reducing annealing furnace: The furnace is used to anneal and reduce cold rolled carbon steels.
还原退火炉：炉子用于冷轧低碳钢的还原退火。
A new method for on-line inspecting the surface quality of the cold rolled strip is put forward.
提出了一种新的冷轧带钢表面质量在线检测方法。
Tinned sheet is cold rolled sheet whose surface is electroplated with a layer of uniform and dense tin.
镀锡板就是在冷轧板的表面电镀一层均匀致密的锡层。
After cold rolled and drawn, the columnar crystals fined to fibrous crystals, which resulted in remarkable work hardening.
经过冷轧和冷拔，柱状晶组织细化为纤维晶组织，并产生显著的加工硬化。
We use hot-rolled steel to produce cold rolled coils and other high-value added products at the Lipetsk plant and VIZ-Stal.
我们利佩茨克工厂和维兹工厂里使用热轧钢板生产冷轧板卷和其他高附加值产品。
The principle and the design of the cold rolled manufacturing process of skew tooth rollers for drawing frames are introduced.
介绍了并条机牵伸罗拉斜齿沟槽的冷轧加工原理及其装置的设计方法。
Surface damage of cold rolled aluminum strip was investigated by observation of roiled surface with a scanning electron microscope.
通过对轧后铝板表面的扫描电子显微观察，就冷轧铝板表面损伤进行了探讨。
The cold rolled coils entered into hot DIP galvanizing workshop are put on waiting position and then transferred to uncoiler by coil car.
冷轧卷进入热镀锌车间后置于待处理位置，然后通过上卷小车送至开卷机。
These housings (series p) are produced from cold rolled sheet steel and are protected against corrosion by a yellow chromate surface treatment.
这些轴承座(系列p)用冷轧钢板制造，表面经过黄色镀铬处理，以防腐蚀。
STRIP: Flat rolled steel used in the forming of cages. Hot or cold rolled to specified thickness, slit to specified widths and wrapped into coils.
钢带：卷起来用于加工保持架的带型钢材。通过热轧或冷轧达到一定的厚度，然后切割成一定的宽度并卷成钢带卷。
This paper presents the test results of the mechanical properties, and relaxation of steel wires for medium strength cold rolled ribbed steel wires.
本文介绍了中强度冷轧带肋钢筋的机械性能和应力松弛试验结果。
A surface inspection system for cold rolled strips is introduced, which is used in on-line detection and recognition of surface defects on cold rolled strips.
介绍一套目前正在开发的冷轧带钢表面质量在线监测系统，该系统用于在线检测和识别冷轧带钢的表面缺陷。
Surface defect in cold rolled galvanization plate in Handan Iron and Steel Limited Group has been introduced, meanwhile the solution process has been discussed.
介绍邯钢冷轧热镀锌线在生产中所遇到的一些表面缺陷，及对解决过程中所遇到的一些问题进行探讨。
The effect of batch annealing process on the microstructure and mechanical properties of SPCCSD cold rolled steel sheet was studied under laboratory conditions.
在实验室条件下，研究了罩式退火工艺对SPCC- SD冷轧板组织和性能的影响。
The effect of speed ratio on the texture of non-oriented cold rolled low silicon steel sheet was investigated after cross shear rolling at different speed ratios.
选取低硅无取向硅钢常化态板材，分别在不同速比下进行异步轧制，考察了速比对低硅无取向硅钢冷轧织构的影响。
However cold-finished steel, especially cold rolled twisted steel is of more advantages in components in bending such as slabs. Therefore it shall be popularized.
而冷加工钢筋，尤其是冷轧扭钢筋，用于板类受弯构件中具有较多优越性，宜大力推广应用。
A fast border-detection algorithm named local border search algorithm was presented here, and applied to an on-line surface inspection system for cold rolled strips.
提出一种快速的边部检测算法，即边界局部搜索算法，并应用于冷轧带钢表面缺陷在线检测系统。
Mechanical properties testing, SEM and TEM was used to study the effects of cold rolled reduction and aging temperature on the cohesion of the weak interface of DISC.
通过力学性能测试、扫描电镜及透射电镜观察，研究了冷轧压下量及时效温度对内生复合钢板弱界面结合强度的影响。
The surface degree of finish of cold rolled stainless steel strip is controlled generally by surface roughness in production and the roughness lower the degree of finish higher.
在生产中，不锈冷轧带钢的表面光洁度一般用粗糙度进行控制，其粗糙度越低，光洁度越高。
The results obtained show the microstructure characteristics of the welded HAZ of the cold rolled low carbon sheets (steel a and b) are same, but the ferrite grain sizes are different.
结果表明：钢a和钢b冷轧低碳钢板焊接HAZ具有相同的显微组织特征，但铁素体晶粒大小不同。
The status and development trend of morden cold rolled strip production technology are introduced in details. Some Suggestions are also put forward on AISC cold rolling strip production.
全面介绍了现代冷轧带钢生产技术的现状及发展趋势，并对鞍钢的冷轧生产提出了一些建议。
Cross breaks are formed on the surface of cold rolled and tempered strip during temper rolling, which influence the surface quality and mechanical characteristics of the temper rolled strip.
冷轧退火后的带钢在平整过程中产生横折印缺陷，严重影响平整后带钢的表面质量及其力学性能。
The species and composition of contamination on the surface of cold rolled steel plates were investigated. Comparison between china made and imported cold rolled steel products was carried out.
研究和分析了国产冷轧低碳钢板试样表面污染物的种类及成分，并且与进口同类钢板进行了比较。
The difference of phosphate coating between aluminum alloy sheet and cold rolled sheet is compared by the test of chemical converted film and its structure on the surface of aluminum alloy sheet.
通过对铝合金板材进行的化学转化膜及膜结构的研究试验，对比了铝合金板与冷轧钢板磷化的异同点。
Effects of relevant manufacture techniques on cold rolled steel sheet performances are analyzed and the performance parameters which should be adopted for different automobile parts are advanced.
分析了相关制造工艺对冷轧薄钢板性能的影响，指出不同的汽车部件应采取的性能参数。
Effects of relevant manufacture techniques on cold rolled steel sheet performances are analyzed and the performance parameters which should be adopted for different automobile parts are advanced.
分析了相关制造工艺对冷轧薄钢板性能的影响，指出不同的汽车部件应采取的性能参数。
应用推荐