It is a kind of coal gasification combustion dryer, which consists of coal gasification combustion furnace and heat exchanger.
一种燃煤气化燃烧烘干机，是由燃煤气化燃烧炉和换热器结合为一体组成。
This has the advantage that the sample is simply thrown into the vertical combustion furnace through a sample feeder (the 1000 times proven ball valve).
这种方式使样品可以很容易地通过样品进料器把样品送入垂直燃烧炉（耐用的1000次进样的球阀）。
The reactions in combustion furnace are very complicated in Claus sulfur recovery process, but it is important for design and production to research these reactions.
克劳斯法制硫过程燃烧炉内的化学反应十分复杂、但研究这些反应对设计和生产有重要意义。
By utilization of the existing boiler a horizontal combustion furnace and a burner that match have been designed for the recovery of the latent heat in the blow gas.
利用原有锅炉，设计与之匹配的卧式燃烧炉和燃烧器回收造气吹风气潜热。
This unit mainly supplies fuel gas for the equipment like in-plant boiler house heater in dehydration unit main combustion furnace in sour gas treatment unit tail gas incinerator and flare stack etc.
本单元主要为厂内锅炉房、脱水装置加热炉、酸气处理装置主燃烧炉、尾气灼烧炉以及放空火炬等燃气设备提供燃料气。
Accurate measurement of the furnace temperature is an important topic for safety and stabilization of the furnace running and optimize the combustion process.
炉膛温度准确测量对于锅炉运行的安全、稳定以及燃烧优化有着很大的意义。
For HTAC (Hight Temperature Air combustion) technology, pressure control and pressure fluctuation during combustion switchover are very important to the furnace reliability and stability.
蓄热式燃烧技术中，炉压控制和换向时造成的炉压波动是一个非常重要的问题。
The furnace flame detection system has wide application foreground. It is a valuable researching direction on combining image processing and combustion control.
全炉膛火焰检测系统具有广阔的应用前景，图像检测和燃烧控制相结合是一个有价值的研究方向。
Construction and working principle of a new design are introduced, combustion and heat transfer performance in the furnace approached.
本文介绍了一种新型的燃煤流化床热风炉的结构和工作原理，探讨了该炉的燃烧和传热特性。
A forcible stream of air, gas, or steam from an opening, especially one in a blast furnace to aid combustion.
吹风，送风从出口，尤其是从助燃鼓风炉的出口出来的空气，其他气体或蒸汽气流。
The concept of furnace combustion management through introduction on line monitoring system with pulverized coal burner was put forward.
通过介绍煤粉燃烧器在线监测系统，提出了炉膛燃烧管理这个概念。
The improvement of the furnace structure and the combustion control system are introduced.
重点介绍了炉体结构及燃烧控制系统的改进。
The flow, heat transfer and combustion process within a 200MW set's boiler furnace are analytically calculated.
针对焦作发电厂200MW锅炉燃烧室，进行了炉内流动、传热及燃烧过程数值分析计算。
This paper introduces the problem of the hot coal gas used in the heating furnace and the application of the regenerative combustion in the heating furnace burning the hot coal gas.
介绍燃热脏煤气在特钢加热炉上存在的问题和蓄热式燃烧技术在燃发生炉热脏煤气特钢加热炉上应用。
A monitoring method based on visualized three dimensional temperature field of combustion in the furnace has been presented.
介绍了一种基于炉内燃烧三维温度场可视化的监测方案。
The result shows that the "puffs" in the furnace are caused by the pressure oscillation, which indicates that there is combustion oscillation in the furnace.
研究表明，燃烧“喘息”现象是由燃烧压力周期波动引起的，说明炉膛内存在燃烧振荡。
Combustion of powdered coal in furnace is a very complicate suspension firing process. Noise interference must be overcome to achieve clear image of flame monitoring system.
锅炉中煤粉的燃烧过程是非常复杂的悬浮燃烧，炉膛火焰监视必须克服监视图像的噪声。
With PDA System the experiment and spectrum analysis on turbulent now had been conducted for vertical bias combustion in tangentially fired furnace.
采用PDA测量系统对四角切圆燃烧锅炉垂直浓淡煤粉燃烧方式下炉内湍流特性进行了实验研究和频谱分析。
Injecting blended pulverized coal combined with oxygen-enriched blast and enhancing wind temperature can notably improve the combustion properties of blast furnace pulverized anthracite injection.
大量富氧效果最为明显，比较而言，混合喷吹，辅以富氧及加入助燃剂能够显著提高煤粉的燃烧性能。
As for the combustion method, a composite combustion technology combined suspension combustion of wood powder with layer combustion of coal on the chain furnace is suggested.
在燃烧方式上，尽量考虑运用木材粉悬浮燃烧和链条炉上煤层燃的复合燃烧技术。
This paper gives an account of the renovated combustion controls for hot blast stove. which is designed to attain stability, economy, rationality during the combustion in blast furnace.
高炉热风炉燃烧控制系统通过改造，对实现高炉燃烧过程的稳定性、经济性、合理性，起到了一定的效果。
The thermal status model is established according to a certain walking beam reheating industrial furnace and the flow field, combustion and heat transfer condition in the furnace are simulated.
本文通过对轧钢步进梁式加热炉内热工状态建模，并对炉内流体流动、燃烧化学反应、传热过程进行了模拟仿真。
Experimental study was conducted of the combustion characteristics of this type of coal in a fixed-bed furnace.
并在一个固定床燃烧试验台上对这种复合型煤的燃烧特性进行了研究。
Discussions are made on the roller track and combustion system etc. of roller hearth type heating furnace. Some opinions are presented.
对辊底式加热炉的炉底辊道、燃烧系统等有关问题进行分析讨论，提出一些看法。
The signal of furnace radiant energy is put into the combustion control system to control the fuel.
将炉膛辐射能信号引入燃烧控制系统，对入炉燃料量进行反馈控制。
By reforming the heating furnace using regenerative combustion technology, the good social and economic benefits has been taken.
采用蓄热式燃烧技术对加热炉进行了改造，取得了良好的经济效益和社会效益。
By reforming the heating furnace using regenerative combustion technology, the good social and economic benefits has been taken.
采用蓄热式燃烧技术对加热炉进行了改造，取得了良好的经济效益和社会效益。
应用推荐