Curing and the dispersion of filler are two important factors for the conductive adhesive.
固化和填料的分散性是影响导电胶粘剂的两个重要因素。
The two major properties of the conductive adhesive are electrical and mechanical properties.
电性能和力学性能是导电胶粘剂的两大主要性能。
The conductive adhesive layer is introduced between the active material layer and the collector;
通过在活性物质层和集电极之间引入一层导电粘结剂层。
Is there evidence that the floor was installed using conductive adhesive with copper earth grounding straps?
是否有证据证明导电地板黏有铜线来接地？
The relation between the resistivity of conductive adhesive and the volume fraction of silver fillers was studied.
在电子工业中应用最广泛的导电胶粘剂是以银粉为导电填料以环氧树脂为粘合剂的体系。
Company's main business areas: Zebra Article, the silicone rubber products, conductive adhesive, such as by keyboard.
公司主营业务：斑马条、硅橡胶制品、导电胶按键盘等。
The disadvantages of three typical lead-free solders, and three problems in the conductive adhesive study are discussed.
文中介绍了三种典型无铅焊料体系的不足之处，以及银导电胶研究中的三个难题。
The effects of silver particles morphologies and size on the electrical bulk resistivity of conductive adhesive were described.
从导电性角度考查银粉颗粒形貌和粒径大小对导电胶电阻率的影响。
So, the selection of the curing agent and the improvement of filler dispersion powder lay a foundation for the conductive adhesive.
因此，固化剂的选择和粉体填料分散性的改善为导电胶粘剂性能的研究奠定了基础。
The conductive adhesive is prepared by polymer matrix, barium titanate ceramic powder, diluent, curing agent and silane coupling agent.
本发明的导电胶由聚合物基体、钛酸钡陶瓷粉、稀释剂、固化剂和硅烷偶联剂制成。
Copper conductive adhesive is prepared by using modified resins and mixed resins as cohesive materials and Copper powders as conductive fillers.
以改性树脂和混合树脂为粘料，铜粉为导电性填料，并配以适当添加剂、固化剂制备铜导电胶。
Heat ageing, natural ageing and water tolerance etc. tests are carried out to study and improve the ageing resistance of copper conductive adhesive.
将铜导电胶进行热老化、自然老化、耐水等试验，以研究其老化性能，并探求改善铜胶抗老化性能的途径。
In order to obtain better conductive functional filler and conductive adhesive, the surface of carbon nanotube (CNT) was wrapped by silver using chemical plating.
采用化学镀法在碳纳米管表面包覆金属银，从而获得了导电性极好的纳米银-碳复合管，并以该复合管为导电功能体制备导电胶。
On the other hand, the tenacity, conductivity and shear strength of conductive adhesive were enhanced by the incorporation of SiO2/Ag composites into conductive adhesive.
同时，在引入载银二氧化硅后，导电胶的韧性、导电性和剪切强度得到有效改善。
The wire with rubber core conductive seal can through the conductive adhesive and article (metal wire point of contact to penetrate film) fixed in the groove or in aperture.
带橡胶芯的金属丝导电密封条能够通过导电胶粘结(金属丝的接触点能够穿透薄膜)固定在沟槽或缝隙内。
The invention solves the problems of the conductive adhesive with metal as the conductive filler, such as high preparation cost and large change of volume resistance after an aging test.
本发明解决了采用金属作为导电填料的导电胶制备成本高、老化试验后体积电阻变化大的问题。
The optimal formula of the UV curable conductive adhesive gained from single factor test was as follows: Silver-plated copper powder 70%, complex photoinitiator 4%, AIBN 2% and KH570 2.5%.
通过单因素实验确定了导电胶的最佳配方：镀银铜粉填充量为70%、复合光引发剂用量为4%、热引发剂aibn用量为2%、偶联剂KH570用量为2.5%。
During the integrated circuit packing process, the quality and service life of integrated circuit are decided directly by the quality of conductive adhesive through non-oxidation thermal curing.
在集成电路封装工艺过程中，对导电胶进行无氧化加热固化的质量直接决定了集成电路的质量和使用寿命。
The conductive mechanism of copper powder acrylate adhesive composite was discussed.
从理论上讨论了铜粉丙烯酸酯胶粘剂的导电机理。
By choosing the solvent, colorant, adhesive, conductive regulator, we have established the composition of the ink and analyzed its main mechanism.
本文通过对油墨成分中溶剂、着色剂、粘合剂、电导调节剂等选材，确立了该油墨的组成，并分析了其主要作用机。
A static conductive emulsion adhesive which is used to paste poly (vinyl chloride) conducting static block was prepared with nonsoap emulsion polymerization mechanism as a reference.
研究借鉴无皂乳液聚合机理，加入导电纤维丝，制备了用于粘贴导静电聚氯乙烯地板胶粘剂。
Insulation materials, optical materials, adhesive products, protective film, conductive cloth, dustproof net and special tape.
本机适用于绝缘材料、光学材料、胶粘产品、保护膜、防尘网、导电布及特殊胶带模切。
The metal foil or conductive fabric with high conductive, one side back adhesive, Excellent electrical conductivity and adhesive force0.
带高导电背胶的金属箔或导电布，单面胶形式，导电性及粘着性优秀。
The heat seal connector is made of coating layer that is consisted in conductive particulate dispersed in hot-melt adhesive on printed circuit polyester film.
热压密封连接器是在聚酯膜上印刷导电线路后，涂覆一层分散有导电微粒并具有热熔性的胶粘层而组成。
RT-B series hot melt coating machine is suitable for producting double-side tapes, double-side sponge tape, masking tapes, fibre tape conductive cloth, adhesive label, etc.
系列使用于加工双面胶带、泡棉双面胶、布基胶带、牛皮纸胶带、美纹纸胶带、纤维胶带、不干胶商标纸等。
The conductive layer joins to a carrier substrate with an adhesive.
导电层通过粘合剂接合至载体衬底。
The thermal property of adhesive was decided by PU matrix, but the influence for conductive carbon black was small on thermal properties.
该胶粘剂的热性能由PU基体所决定，导电炭黑对其热性能的影响不大；
A heat conductive insulation adhesive with good heat resistance by medium temperature solidification was developed.
研究了一种中温固化、耐热性能良好的导热绝缘胶粘剂。
One- side adhesive tape, with excellent heat dissipation performance, film form, excellent bonding . emitting the heat in the mobile phone battery _(thermal conductive&spread application).
单面胶形式，散热性能优秀，薄膜形式，粘着力优秀。 将手机电池中产生的热量散发出去（导热分散用）。
One- side adhesive tape, with excellent heat dissipation performance, film form, excellent bonding . emitting the heat in the mobile phone battery _(thermal conductive&spread application).
单面胶形式，散热性能优秀，薄膜形式，粘着力优秀。 将手机电池中产生的热量散发出去（导热分散用）。
应用推荐