Daheishan gold deposit is a fractured alteration type and quartz vein type gold deposit, hosted in the outer contact zone of Damiao granite.
大黑山金矿是赋存于大庙花岗岩体外接触带的破碎蚀变岩型和石英脉型金矿。
The contact zone width of crane wheel with track is analyzed by plane stress elastic theory.
采用平面应力弹性理论,对吊车车轮与轨道的接触区尺寸进行理论分析。
Based on the above straight lines, the contact zone can be determined from the known indentor curvature and loading.
根据这些直线族,可以由已知的压头曲率和外载荷确定接触区尺寸。
The contact zone between roller and workpiece and its contour's definition are the cruxes of establishing the FEM mechanical model.
在建立筒形件强旋有限元力学模型过程中,旋轮与工件接触区及其边界的描述是重要的一环。
Granite is distributed in the periphery of mining area far from the andalusite bodies, and its contact zone can't control the pegmatitic andalusite bodies.
矿区内未见花岗岩体出露,矿区外围虽有花岗岩体分布,但距离矿体很远,矿体并不受岩体接触带控制。
Marmatite is the guide mineral of the second ore type which appears in bedded, veined and irregular ore bodies near contact zone of magmatic rock or joint positions between faults and ore beds.
另一种以铁闪锌矿为标志,矿体呈似层状、脉状及不规则状等,靠近岩体接触带或断裂与赋矿层的交汇部位产出,代表了成矿第二世代。
The nephrite in Qinghai occurs within the internal contact zone between granite and marble.
青海软玉产于花岗岩与大理岩的内接触带。
The value is determined by the grinding wheel speed and the fluid film thickness within the contact zone.
它由砂轮的转速及接触区域的液体薄膜的厚度决定。
The copper (molybdenum) ore bodies are mainly situated in or out of the contact zone between the mineralized porphyry bodies and the biotite granite porphyry.
铜(钼)矿(化)体主要产于含矿斑岩体和黑云母花岗斑岩的内外接触带中。
The light coloured nephrite, which formed on the contact zone of the dolomitic marbles and the granites, has more translucency and practically has not ore dissemination.
产于大理岩和花岗岩接触带的浅色软玉,透明度高,无金属矿物浸染。
The geologic environment was mostly resulted from the intrusion of magma which led to folding of the overlying volcanic series, the formation of the intrusive dome and the contact broken zone.
形成这样的地质环境条件主要是岩浆侵入作用导致上覆火山岩的褶皱构造、侵入体的岩穹构造及接触破碎带构造等。
Carter (1962) assumed that the zone of adhesion occurred at the leading edge of the contact.
卡特(1962)曾假定,粘着区域发生在接触的前缘。
Temperature response at contact zone during grinding of granite were measured using thermocouple detector.
采用热电偶夹丝法测量了平面磨削山西黑石材过程中接触弧区的温度。
Important gold ore bodies generally occur in the contact zone of rock bodies and country rocks.
有规模的金矿体一般产在岩体的接触带上。
With a practical project, authors state application status of the pipe jacking method in construction of contact tunnels of a subway shield zone tunnel.
从工程实例出发介绍顶管法在地铁盾构区间隧道联络通道施工中的应用情况。
Ludousou gold deposits belong to fractured altered rock-type gold deposit, produced in Dewulu quartz diorite and Ludousou quartz porphyry contact zone.
录斗艘金矿床属破碎蚀变岩型金矿,产于德乌鲁石英闪长岩与录斗艘石英闪长斑岩接触带附近。
The scheelite orebody of the Yangjingou mining area occurred in the contact zone of the lower Paleozoic Wudaogou Group strata and the Indo-Sinian adamellite.
杨金沟矿区白钨矿体产于下古生界五道沟群地层与印支期二长花岗岩内外接触带中。
The contact metamorphic zone may be further divided into coking coal mixing zone, natural coke zone, coking coal zone and normal coal zone.
接触变质带可进一步划分为岩焦混杂带、天然焦带、焦化煤带、正常煤带。
The contact deposit is controlled by the contact zone, and shows typical features of skarn orebody.
接触带矿体受接触带控制,具矽卡岩型矿体典型特征。
The zone is maintained in contact with a liquid medium that serves to replenish the liquid in the zone and maintain the composition of the mixture in the zone substantially constant.
将该区与液体介质保持接触,该液体介质用来补充区内的液体并保持区中混合物组分基本不变。
The grain refinement begins from the center ellipsoidal zone, and then gradually expands to the vertical edge zone and conical contact zone.
细化首先开始于易变形区,再相继扩展到纵向棱边区和接触锥形区。
The variation of lateral displacement affects extremely the geometry and mechanics parameters in contact zone.
横移量的变化将极大地影响接触斑上的几何参数和力学参数。
A new method is designed for in process monitoring of grinding temperature at contact zone in workshop with strong interference.
设计了一种可以在生产现场的强背景干扰下在线监测磨削弧区温度的新方法。
The spacious outdoor area within the complex will be designed communally and serve as a contact zone for the residents of both buildings.
建筑群宽敞的户外区域将被设计成公共区域,作为两座建筑中的居民的生活交流区。
The state of tool workpiece contact zone in Electric Hot Machining (EHM) is different from that of conventional cutting.
导电加热切削时,刀工接触区的状态与常规切削的不同。
The main characteristics of the skarn are as follows:(1)occurring as bedded, para-bedded in the contact zone between carbonate and microclastic rock, and its occurrence being accordance to the strata;
研究表明该夕卡岩的主要特征为:(1)呈层状、似层状赋存于碳酸盐岩和细碎屑岩接触带,产状与地层一致;
The main characteristics of the skarn are as follows:(1)occurring as bedded, para-bedded in the contact zone between carbonate and microclastic rock, and its occurrence being accordance to the strata;
研究表明该夕卡岩的主要特征为:(1)呈层状、似层状赋存于碳酸盐岩和细碎屑岩接触带,产状与地层一致;
应用推荐