The crack propagation path follows some regularity on the whole.
裂纹扩展路径总体上遵循一定的规律。
Short fatigue crack propagation is much accelerated by filled hydrogen.
充氢条件下，大大加速短裂纹疲劳扩展。
The results show that the failure of the tube is due to stress corrosion crack propagation.
结果表明，该进气管断裂系由于应力腐蚀裂纹失稳扩展所造成。
A distribution function of two dimensional threshold is given for fatigue crack propagation.
本文给出二维疲劳裂纹扩展门槛值分布函数，建立二维应力—门槛值干涉模型。
Special attention has been focused on the instability phenomenon associated with crack propagation.
我们特别把注意力集中在裂纹扩张过程中的不稳定现象上。
This is formed by the cracks oscillating about the centerline in the direction of crack propagation.
这是由于在裂纹的传播过程中，裂纹尖端沿着传播方向的中线上下振荡所形成的。
Transgranular fracture. Fracture of polycrystalline materials by crack propagation through the grains.
多晶材料裂纹穿过晶粒扩展而断裂。
The formula of the fatigue crack propagation rate was directly derived from the fatigue damage criterion.
通过疲劳损伤准则，导出疲劳裂纹稳定扩展速率的计算公式。
Intergranular fracture. Fracture of polycrystalline materials by crack propagation along grain boundaries.
多晶材料裂纹沿着晶界扩展而断裂。
Fatigue crack propagation in a compressive residual stress field can be characterized with the closure effect.
疲劳裂纹在残余压应力场中的扩展可借助于裂纹闭合力来描述。
According to the mode of crack propagation the mechanism of crack initiation and propagation was also discussed.
根据裂纹扩展方式的变化，对氢致裂纹萌生和扩展机制进行了讨论。
Brittle fracture. Fracture that occurs by rapid crack propagation and without appreciable macroscopic deformation.
通过快速裂纹扩展发生断裂，没有明显的宏观变形。
An approach for modeling rock crack propagation using discontinuous deformation analysis (DDA) method is presented.
提出一种用非连续变形分析方法模拟岩石裂纹扩展的方法。
Crack propagation is affected by many factors, among which, the crack tip plastic zone attracts a lot of attention.
影响裂纹扩展的因素有许多，这其中，裂纹尖端塑性区引起众多研究者的兴趣。
The energy release rate for crack propagation depends only on the stress intensity factor and the material constants.
电导通裂纹模型中的静电场对裂纹尖端扩展的能量释放率不作贡献。
The fatigue crack growth rate is the core for predicting fatigue life by use of fatigue crack propagation (FCP) theory.
疲劳裂纹扩展率表达式是采用疲劳裂纹扩展理论预报疲劳寿命的核心。
An automatic compliance crack length measurement system for fatigue crack propagation test was used in the experiments.
研究中应用了一种柔度法疲劳裂纹自动测量系统进行裂纹长度测量。
From the view point of material selection, we analyzed their dynamic fracture toughness and crack propagation resistance.
从选材角度对比分析了几种铝合金的动态断裂韧性及裂纹扩展阻力。
A conclusion that the acoustic emission rate depends mainly on the crack propagation rate is also verified by experiments.
指出声发射率主要受裂纹扩展速率控制，此结论亦得到了实验的证实。
All the result demonstrated the relationship between the pull out property and the crack propagation in matrix qualitatively.
实验结果定性地证明了纤维的拉拔特性对基体裂纹扩展的影响关系。
The crack propagation characteristics of X70 pipeline steel in the synthetic soil solution under cyclic loading are investigated.
试验研究了X70管线钢在模拟土壤介质中，循环载荷下的裂纹扩展特性和宏观规律。
The fatigue crack propagation testing were completed for CT specimens of LZ50 axle steels with continuous casting and mould casting.
完成了连铸和模铸LZ50车轴钢疲劳裂纹扩展试验，得到了两类LZ50车轴钢的疲劳裂纹扩展曲线。
Fractures in the rich gas transportation pipeline was analyzed based on a crack propagation pipeline model for rich gas transmission.
为了研究富气输送对管道动态断裂的影响，建立了富气输送裂纹动态扩展管道模型。
Short cracks propagation research: the degree of Microscopic structure influence to the fatigue crack propagation depends on crack length.
短裂纹扩展研究：微观组织结构对疲劳短裂纹扩展的影响程度取决于裂纹的长度。
Fatigue crack propagation behaviour under variable amplitude loading is significantly influenced by load history induced sequence effects.
导致加载序列作用的加载历史极大地影响着变幅加载下的疲劳裂纹扩展行为。
By the application of complex functions theory, the dynamic crack propagation problems under the condition of anti-plane were investigated.
采用复变函数论，对反平面条件下的动态裂纹扩展问题进行研究。
The strain energy release rate of the crack propagation was calculated by using virtual crack closure technique, and fatigue life was forecasted.
采用虚拟裂纹闭合技术计算裂纹扩展的应变能释放率，并对裂纹扩展寿命进行计算。
In this paper, a relative criterion method is presented for analysing the elastic plastic stable crack propagation under biaxial loading conditions.
本文提出了一个用相对准则分析双向载荷下弹塑性裂纹稳定扩展的方法。
This paper presents a review of the characteristics and mechanisms of fatigue crack propagation at near-threshold range in various metals and alloys.
本文回顾了各种金属及合金在门坎区附近的疲劳裂纹扩展的机制和特征。
This paper presents a review of the characteristics and mechanisms of fatigue crack propagation at near-threshold range in various metals and alloys.
本文回顾了各种金属及合金在门坎区附近的疲劳裂纹扩展的机制和特征。
应用推荐