Said ferro-silicone is an important raw material for smelting IF steel (gapless atomic steel), car steel and high-grade electric steel, etc.
此硅铁是冶炼IF钢（无间隙原子钢）、轿车用钢、高级电工钢等的重要原料。
The CONSTEEL process introduces a new concept in electric steel -making. The process USES the furnace off-gas and fuel to preheat the scrap fed into the furnace.
康斯迪工艺提出了电炉炼钢新概念：即利用电弧炉排出的高温废气对送往炉中的炉料进行连续预热。
A new technology and equipment of annealing and bluing for finished stator and rotor of uncoated cold-rolled electric steel lamination in bell-type hytrogen furnace was introduced.
介绍了无涂层电工钢冲片叠片成型后的电机定子和转子在罩式炉内进行退火和发蓝处理一次完成的新工艺及装置。
A new technology and equipment of annealing and bluing for finished stator and rotor of uncoated cold-rolled electric steel lamination in bell-type hydrogen furnace was introduced.
介绍了无涂层电工钢冲片迭片成型后的电机定子和转子在罩式炉内进行退火和发蓝处理一次完成的新工艺及装置。
In metallurgical industry and in machine building industry, any steel making process (converter or electric steel furnace) needs to control the variation in molten steel composition and temperature.
冶金和机器制造工业的炼钢(转炉、电炉)过程中，需要控制钢水温度的变化。
Magnetic properties (including lower iron loss and higher magnetic flux) of non-oriented electric steel can be obtained effectively through controlling slab heating, rolling and coiling temperatures.
合理地控制板坯加热温度、轧制温度和卷取温度可以有效提高无取向电工钢产品的电磁性能(降低铁损、提高磁感)。
The material is the main source of iron for the steel industry, and it’s cheaper and more common than the rare-earth metals typically used to make electric car motors.
原材料的主要来源是钢铁工业中的铁，而且与通常用来制造电动汽车发动机的稀土金属相比，它不仅更便宜，而且也更普通。
The material is the main source of iron for the steel industry, and it's cheaper and more common than the rare-earth metals typically used to make electric car motors.
原材料的主要来源是钢铁工业中的铁，而且与通常用来制造电动汽车发动机的稀土金属相比，它不仅更便宜，而且也更普通。
Its circular brick-and-cement foundation is stationary, supporting a steel track on which the house revolves, moved by a small electric motor.
圆形的砖混地基底座是固定的上面安装了钢轨而房体就由一台小型电动马达驱动在钢轨上转动。
Another: impervious Steel Liner electric kettle is to do this.
另：不透水钢衬电热水壶是做到这一点。
In the construction of steel pipe scaffold on electric welding machine, vibrator and other electrical equipment should be placed in dry wood, operators shall wear insulating protective equipment.
在钢管脚手架上施工的电焊机、振捣器等用电设备应放置在枯燥的木板上，操作人员应穿戴绝缘的防护用品。
To take away the refining part of the steel making cycle off an electric arc furnace, which is discussed elsewhere, is an excellent start.
把炼钢周期中的精炼阶段从电弧炉中移走（这个问题将在别处加以讨论），是一个良好的开端。
Since the property requirements are so special, tool steel are usually melted in electric furnace using careful metallurgical quality control.
由于需要的性质是如此特别，工具钢通常使用冶金质量控制的方法在电炉中熔化。
Electric welding is used to repair iron and steel parts of machinery, and to make steel pipe and frameworks of all kinds.
电焊可用于修理机器的铁制和钢制部件，还可以用于制作各种各样的钢管和其它钢结构部件。
But once the installation of the electric heating device, especially the bearing type operation, stainless steel products limited.
但是一旦安装了电加热装置，特别是采用了承压式运行，不锈钢内胆产品存在很大的局限性。
The carbon fiber strengthening method is compared with electric chemical strengthening method and stick steel strengthening method.
并针对碳纤维布加固特点，与电化学加固法、粘钢加固法加以对比。
The electric circuit in the work location should use steel-pipe laying wire and select explosion-proof electrical equipment.
工作场所内的电气线路应采用钢管布线，电气设备选用防爆型的。
The influences of steel can on electric performance of batteries were mainly exhibited after storage.
钢壳对电池电性能的影响主要表现在电池储存以后的电性能上。
The results showed that the initial electric performance had no difference between batteries made of different steel cans.
结果表明：不同钢壳的无汞碱性锌锰电池初始期电性能无明显差异。
Most of the steel for line pipe is made by open-hearth, electric furnace, and basic-oxygen processes.
大部分建管道用管子的钢材由平炉、电炉和碱性顶吹转炉生产。
The electric arc furnace steel-making productivity has gained rapid progress in the recent years.
近几年来，电弧炉炼钢生产率有较大的提高。
The peak value load of main electric power consumers such as steel works causes electric power resource to waste, short supply of mains power and consumer to increase electric cost.
钢厂等主要用电大户的峰值负荷造成电力资源浪费，供电紧张及企业自身用电成本高居。
Technology employing plasma body of corona to electric atomization of the antirust oil to spray is a new item of spraying steel plate.
应用电晕等离子体对防锈油荷电雾化进行喷涂的技术，是一项新的钢板喷涂防锈油技术。
A special device with arranged steel electrodes and controlled interferential electric field in water pool was designed.
设计了室内模拟装置：在水池内放置排列的钢电极和可控制干扰电场。
Park a small electric train, Youlong Water, the space shuttle, electric cars, steel Bridges, tunnels, - Chuen, such as more than 20 kinds of recreational facilities.
园内有电动小火车、游龙戏水、航天飞机、电动汽车、铁索桥、隧道、喷泉等20多种游乐设施。
Steel wire cable or other suspension element can be added at both sides of the electric cable according to customers'requirements(YFFBJ type).
可按顾客需要，在缆芯两侧增加钢丝绳或其他承力元件（YFFBJ型）。
The improvement of slab equiaxed crystal ratio by electric pulse on liquid steel in continuous casting mould at Pan steel slab castor No.
从结晶器施加电脉冲输入能量、钢液过热度、电极间距三方面，探讨电脉冲处理提高铸坯等轴晶率的效果。
The improvement of slab equiaxed crystal ratio by electric pulse on liquid steel in continuous casting mould at Pan steel slab castor No.
从结晶器施加电脉冲输入能量、钢液过热度、电极间距三方面，探讨电脉冲处理提高铸坯等轴晶率的效果。
应用推荐