So rather than calling this an electron beam, this was called a cathode ray.
因此我们最好别叫它电子束，而是阴极射线。
Food is irradiated by brief exposure to X-rays, gamma rays or an electron beam.
食品通过短暂地暴露在x射线、γ射线或电子束来进行辐照杀菌。
Resolution is still limited by the wavelength of the electron beam, but this wavelength is much smaller than that of visible light.
分辨率仍受限于电子束的波长，但此波长远小于可见光的波长。
As shown in this diagram, food, such as large cuts of meat or packaged products, is placed on a conveyor belt under the electron beam.
如图所示，食物，诸如大块切割肉或包装产品，放在传送带上，置于电子束下。
Though it's fairly uncommon to see irradiated steaks in your grocer's meat case, electron beam irradiation is a well-established practice, according to the U.S. Environmental Protection Agency.
尽管你很少会在杂货店肉案看到辐照过的牛排，但按照美国环境保护局的说法，电子束辐照确实是一个行之有效的做法。
The electron beam lithography and its improvement are introduced also.
同时还介绍了电子束光刻技术及其改进。
Using methods like electron beam melting or selective laser sintering.
使用方法如电子束熔炼或选择性激光烧结。
Technique of mutation breeding in gladiola was studied by means of electron beam.
用电子束辐射唐菖蒲种球，研究唐菖蒲的诱变育种。
Finally, electron beam modification technology of cast aluminum alloy is introduced.
介绍了铸造铝合金的电子束改性技术。
The study on the third continuum of argon pumped by the relativistic electron beam was made.
对强流相对论电子束抽运氩产生的氩的第三谱带进行了研究。
This paper describes a new multi ion and electron beam system for preparing optic thin films.
本文介绍一种新型的光学薄膜制备用多离子束电子束系统。
The drift tube assembly provides the axial trap for ions in an electron beam ion trap (EBIT).
漂移管组件为EBIT提供约束离子的轴向电势阱，是EBIT装置的核心区域。
When exert a sine signal, the trace of electron beam on screen also changes along sine signal.
当水平方向偏转电压为正弦信号时，屏上电子的扫描轨迹也按正弦规律变化。
Purpose: To investigate electron beam ct (EBCT) features of congenital coronary artery fistula.
目的：探讨先天性冠状动脉瘘的电子束ct (EBCT)征象。
Cooling force in electron cooling system is closely related to the temperature of electron beam.
电子冷却系统中冷却力的大小与电子束的温度密切相关。
Based on thin annular electron beam approximation, the focusing effect of plasma is investigated.
在薄环形束的近似下讨论了等离子体对空心电子束的聚束作用。
High energy density electron beam is employed in surface rapid solidification on Ni plated ti alloy.
采用高能量密度电子束进行了钛镀镍合金表面熔凝处理的研究。
In the electron beam and ion beam device, the emission system affects the quality of the whole device.
在电子束及粒子束器件中，发射系统直接影响整个器件的质量。
The stability of intense electron beam via the periodic static electric and magnetic fields is discussed.
本文讨论了强流电子束通过周期性静电场和静磁场的稳定性。
An electron beam does not diffract at atomic scales, so it does not cause blurring of the edges of features.
由于电子束在原子尺度不会绕射，所以它不会使得图案细节的边缘模糊。
This paper introduces rapidly controlling principle on electron beam current for electron beam welder (EBW).
介绍了电子束焊机用电子束流快速控制原理。
The chief specifications, construction and performance of the new vacuum electron beam furnace are introduced.
本文介绍了新型电子束熔炼炉技术参数、结构、性能及其特点。
The effects of diaryliodonium salt initiator on electron beam (EB) curing behavior of epoxy resins were studied.
研究了碘钅翁盐引发剂对于环氧树脂电子束辐射固化效果的影响。
Objective to evaluate value of electron beam computed tomography (EBCT) in diagnosis of truncus arteriosus (TA).
目的探讨电子束ct (EBCT)在共同动脉干(TA)诊断中的应用价值。
The results show that the MTGM method is an effective way of emittance measurement for intense pulse electron beam.
实验结果表明，修正三梯度方法是强流脉冲电子束发射度测量的一种有效的手段。
The most accurate ray-tracing model is used firstly on the development simulation of resist exposed by electron beam.
在电子束曝光胶图形的三维显影模拟工作中，首次使用了最精确的三维线踪模型。
An online beam spot diagnostic system for high current, short pulse electron beam based on Cerenkov radiation is introduced.
介绍了一套基于切伦科夫辐射的用于强流短脉冲电子束束斑实时测量的装置。
After electron beam welding, electron beam local heat treatment was applied in GH4133 superalloy as the turbine disk material in this paper.
针对涡轮盘材料GH4133合金，在电子束焊后采用新颖的电子束局部热处理工艺对接头进行热处理。
This article introduces the process and characteristics of clutch gear welded by vacuum electron beam and jig design for better welding quality.
论述了离合器齿轮采用真空电子束焊接的工艺过程及特点，并设计夹具以保证焊接质量。
This article introduces the process and characteristics of clutch gear welded by vacuum electron beam and jig design for better welding quality.
论述了离合器齿轮采用真空电子束焊接的工艺过程及特点，并设计夹具以保证焊接质量。
应用推荐