Interaction between Protein and Lipid in Soybean Milk at Elevated Temperature
蛋白质亚基缺失的特异大豆的筛选及β亚基在大豆加工中的作用
It has satisfactory mecha deal properties both at room and elevated temperature.
它具有良好的常温与高温机械性能。
Cobalt - based alloy is a kind of important materials used in elevated temperature.
钴基合金是一种重要的高温材料。
Increased humidity and elevated temperature will reduce available work time and set time.
湿度和温度增加将使可得的工作时间和凝固时间缩短。
Casting and curing of concrete at elevated temperature would decrease its compressive strength.
拌和及养护的温度高，混凝土抗压强度低。
Applications requiring strength at elevated temperature, e. g. engineering hardware, brake component.
用于在高温下需要保持强度的铸件，如工程配件，刹车组件。
The purified precipitate burns at elevated temperature and high pure tungsten trioxide can be obtained.
通过这一系列过程将钨酸纯化，然后高温灼烧即得高纯三氧化钨。
Elevated temperature method is used to measure the thermal power and electrical properties of welding arc.
采用温升法测量了电弧的热功率和静特性。
The correlation between mechanical behavior of concrete and temperature was analyzed at elevated temperature.
分析研究了高温作用下混凝土的力学性能与温度之间的关系。
The erosion tests at elevated temperature show that coating's erosion behavior is between plasticity and fragility.
高温冲蚀磨损试验表明，各涂层的冲蚀磨损行为介于塑性与脆性冲蚀之间，并以塑性磨损为主。
The research provides a theoretical base for the fatigue life evaluation of similar materials at elevated temperature.
得出的结论为在高温条件下相类似材料的疲劳寿命评估提供了理论依据。
MTC pastes cured at elevated temperature in alkalis environment can yield amount of gelatinous hydrate to solidify mud.
MT C浆在高温碱性环境中能够生成大量凝胶水化产物，使泥浆固化。
Deformation behavior at elevated temperature of AZ31B magnesium alloy was studied systematically by processing map theory.
采用加工图理论系统分析了AZ31 b镁合金在高温变形过程中的变形行为。
Performance check and trial use in elevated temperature environment indicated that this adhesive has very good properties.
性能检测和高温环境试用表明，该胶粘剂性能优良。
A finite element program CCGC-1 is compiled to simulate the creep crack growth rate in materials working at elevated temperature.
编制了有限元程序CCGC - 1以模拟计算高温材料蠕变裂纹的扩展。
Finally, the fluid flow of the weld pool was taken into account by increasing the heat conduction coefficient at elevated temperature.
最后采用增大热传导系数的方法，考虑了熔池内流体流动对整个温度场的影响。
A tumor, for example, requires an increased flow of blood to grow, possibly resulting in a slightly elevated temperature around the tumor.
例如，肿瘤需要血流才能生长，这就会引起肿瘤周围的温度轻微升高。
The rupture mode of the composite at room and elevated temperature depends upon the work-hardening characteristics of the nickel alloy matrix.
复合材料常温和高温的拉伸断裂模式与基体相的形变强化特性有关。
The process of annealing consists of heating the steel to an elevated temperature for a definite period of time and, usually, cooling it slowly.
退火工艺的组成为把钢加热到一定温度并保持一段时间，通常再缓慢冷却。
Effective sintering AIDS not only can improve microstructure but also can enhance performances of elevated temperature and oxidation resistance.
有效的烧结助剂不但可以改善氮化硅陶瓷的显微结构，而且可以提高氮化硅陶瓷的高温性能和抗氧化性能。
The experiment results showed that the stabilization . by K-AHM was better than that by S-P at both normal temperature and elevated temperature.
实验结果表明，不论是室温还是加温的情况下，K-AHM对页岩膨胀的抑制作用均好于S-P。
On the basis of experimental facts, a new process of producing copper sulfate by medium acidic air oxidation at elevated temperature was offered.
在实验基础上，提出了中酸度高温空气氧化法生产硫酸铜的新工艺。
To predict the fatigue crack growth life of welded equipments at elevated temperature, a group of novel fatigue crack growth equations was proposed.
为了预测焊接构件在中温环境下的疲劳裂纹扩展寿命，提出了一组新的疲劳裂纹扩展方程。
The influence of the microstructure on mechanical property and rupture mechanism of the composite at the room and elevated temperature were discussed.
探讨了自生复合材料凝固组织对力学性能的影响以及室温和高温复合材料的断裂机制。
The fatigue behavior of non-transferring toughened ceramics and fiber reinforced ceramics at ambient and elevated temperature was discussed in detail.
论述了非相变增韧陶瓷及纤维增韧陶瓷的室温及高温疲劳特性，重点介绍了循环载荷对疲劳裂纹扩展过程的影响。
QUENCHING: The process of rapid cooling from an elevated temperature. The product is placed in contact with liquids or gases, usually oil, water, or air.
淬火：指从某一高温快速冷却的过程。产品被放置于液体或气体中接触，通常是油，水或者空气。
The results show that the mechanical properties of ZA45 at room temperature is better, and the elevated temperature mechanical properties of ZA50 is better.
结果表明：在室温下ZA45具有较高的力学性能；而ZA50则具有较高的高温力学性能。
The failure of bolted flanged connections will lead to enormous economic loss, serious environment pollution and personal injury accidents at elevated temperature.
高温螺栓法兰连接系统的失效不仅会造成巨大的经济损失，而且还会污染环境，甚至酿成重要人员伤亡事故。
The failure of bolted flanged connections will lead to enormous economic loss, serious environment pollution and personal injury accidents at elevated temperature.
高温螺栓法兰连接系统的失效不仅会造成巨大的经济损失，而且还会污染环境，甚至酿成重要人员伤亡事故。
应用推荐