By introducing the FEM, the mixed method is extended to perform finite element reliability analysis.
通过引入有限元方法，混合分析法可适用于结构可靠度问题。
This dissertation successfully used cluster computing for solving large-scale linear algebraic equations problems when the finite element method (FEM) is applied in electrical prospecting.
本文成功地将机群计算应用到解决在电法勘探中使用有限元方法（FEM）时产生的大规模线性方程组问题。
Due to high computing precision and processing arbitrary structure shape, finite element method (FEM) can become proper method to solution this problem.
具有较高计算精度并能够处理任意结构形状的有限元素法可作为求解该问题的合适的方法。
The paper presents the research into the stress state of roller teeth using FEM (finite element method). The results show that different structure parameter causes a change in roll stress.
采用有限单元法对轧辊辊齿的应力状态进行了研究，得出了不同结构参数对轧辊应力变化的影响。
Based on finite element method (FEM), the vibration of power transformer windings caused by electrodynamic force is analyzed.
利用有限元算法分析了三相电力变压器绕组各线匝在不同运行模式下电动力引起振动。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
The variation finite element method (FEM) using the pseudo-potential function was presented for the simulation of transonic rotational flows.
本文运用赝势函数变分有限元方法数值模拟了绕翼型的跨音速有旋流动。
The thesis provides the concept of variable rigid body which simulates the grouting, and simulates the process of shield tunneling with finite element method (FEM).
本文提出了用变刚体模拟注浆体性质随施工过程的变化，用有限单元法模拟盾构法隧道施工的全过程。
The numerical analysis of finite element method (FEM) is an important means of modern engineering refined design, having become an indispensable engineering tool for designers.
有限元数值分析是现代工程精细设计的重要方法，已成为工程设计人员不可或缺的重要工具和手段。
The numerical result of water temperature of reservoir in Longtan engineering by use of finite element method (FEM) is reliable and accurate.
通过对龙滩工程水库水温的计算结果表明，用有限元法计算水库水温有较高的精度和可靠性。
In the evaluation of heat flow, the quantity of heat in each position of the torque tube has been determined using FEM (finite element method).
在对热流的估算中，力矩管上每个位置的热量是通过有限元法计算获得的。
The analytical result proofed by finite element method (FEM) indicates the same results by two methods.
通过有限元法验证解析结果，两种方法所得结果吻合较好。
Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).
用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。
The solidification process of liquid metal in the CASTEX technique was studied by FEM (finite element method).
利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
The transient heat transfer process of piston set-cylinder liner system in gasoline engine was researched with direct coupling finite element method (FEM).
采用直接耦合的有限元分析方法对一汽油机的活塞组—气缸套系统的瞬态传热过程进行了研究。
An effective vector finite element method (FEM) for analysis of 3d radiation problem is proposed.
提出了一种用于3 -D电磁辐射特性分析的快速有限元方法。
Biomechanical analysis of artificial hip prosthesis was made by nonlinear finite element method (FEM).
并采用非线性有限元方法，进行人工髋关节的生物力学分析。
The rectangular groove guide (RGG) is analyzed by the finite element method (FEM).
本文用有限元法分析了矩形槽波导。
The results from analogy analysis, finite element method (FEM) and experiment analysis are presented.
分别用解析法和有限元方法的计算结果与试验结果进行了比较。
This paper analyzed the effect of corroded flaw interaction on remaining strength of line pipe with the finite element (FEM) analysis method.
采用有限元数值计算方法分析了腐蚀坑交互作用对管道剩余强度的影响。
Based on high viscous asphalt, this paper mainly studied the following four topics: Firstly, FEM (finite element method) was used to analyze the effect of stress absorbing layer.
本文以高粘性沥青为结合料，主要对以下四方面内容进行了研究：首先，用有限元方法计算分析应力吸收层防治反射裂缝效果。
The main forming process of 7005 aluminum by porthole die is simulated with the FEM (finite element method).
用有限单元法对7005铝合金通过平面分流模成型齿轮泵体型材的主要过程进行了模拟。
The stress and displacement distributions of the bellows under torsion loading are investigated by using both finite element method (FEM) and equivalent cylinder method.
本论文分别采用有限元法和等效圆筒法对波纹管在扭转载荷作用下的应力分布和位移变化情况进行了计算。
The technique facilitates the modeling of multilayered passive circuits using the hybrid mode matching and finite element method (MM/FEM).
这里采用了模式分析和有限元相混合的方法来分析多层无源电路。
The FEM(finite element method) of the main shaftclamping apparatus-cutter system for DMU-70V NC high speed machining was built, and the results of the FEM were validated using dynamic test.
建立了DMU-70V五轴数控高速加工中心主轴-夹具-刀具系统的有限元模型，并利用动态测试的方法对有限元计算结果进行验证；
Among the numerical simulation methods, the finite element method (FEM) is widely to solve the electric field with complex structure and multi-dielectric medium with high precision.
在常用数值求解方法中，有限元法以其通用性强，适用于结构复杂、多重介质复杂场域求解，且求解精度高等优点而被广泛用于电器电场的数值求解。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
应用推荐