Because of good applicability and high precision the finite element analysis method has become the preferred method for numerical magnetic field computation of machines.
由于电磁场有限元分析方法具有通用性好、计算精度高的特点，因此成为目前首选的电机磁场数值计算方法。
Methods Three-dimensional finite element analysis method was used.
方法采用三维有限元法。
Methods: Three-dimensional finite element analysis method was adopted.
方法：采用三维有限元法。
The modeling of toroidal mirror was analyzed by finite element analysis method.
利用有限元方法对超环面镜的压弯力学模型进行分析。
The finite element analysis method is used to check the mechanical characteristic of the mainly structures.
在设计中应用了有限元方法对结构的主要受力部件进行了力学分析。
This paper suggests a finite element analysis method of the multilayer pavement with materials of nonlinearity.
本文提出了一个考虑材料非线性的多层路面应力分析的有限单元法。
On the constitutive laws of incompressible rubber like materials and the corresponding finite element analysis method.
讨论大变形拟不可压缩橡胶类材料的本构关系及有限元分析方法。
The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.
本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；
The finite element analysis method is used to simulate the 3D precision cutting, including orthogonal cutting and oblique cutting.
采用有限元方法模拟三维精密切削过程，包括三维正交切削和三维斜角切削。
The article introduces the characteristics of analytic method and finite element analysis method of transverse bearing of the box beam.
介绍了箱梁横向受力的解析法与有限元分析法的特点。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
The finite element analysis method was used to analyze the static electric field with the orthogonal design method to optimize the transducer.
采用三维有限元方法和正交试验设计方法相结合对传感器结构进行了优化设计。
Finally it discussed the model structure's load-carrying capacity, deformation, shape of damage etc. through macro finite element analysis method.
再次采用宏观有限元方法分析了模型结构的承载力、位移、破坏形式等问题。
Let the finite element analysis method be introduced into the CAD of carbide end mill, and carry out an analysis on the strength and rigidity of the cutter.
将有限元分析方法引入硬质合金立铣刀CAD中，对刀具的强度、刚度进行分析。
In this paper, the vibration character of the spark ignition engine model 492 and its major components are calculated with the finite element analysis method.
本文用有限元法计算了492型汽油机及其主要部件的自振特性。
Applying the finite element analysis method to the design of Hydraulic Gate Hoist structure will furthest shorten the period of design, and improve efficiency.
将有限元法应用于门架的设计过程，可以大大减少设计工作量，提高设计的效率。
Using finite element analysis method, three-dimensional calculation is conducted for force summing on rod in high-inclination well of Liaohe tidal zone oilfield.
应用有限元法对辽河滩海油田大斜度定向井抽油杆柱受力进行了三维计算。
Based on the deformation theory of linear hardening materials, a simplified finite element analysis method is proposed to calculate the limit load of structures.
基于线性硬化材料形变理论，本文提出了一种计算结构极限载荷的有限元简化算法。
The value and trend of finite element analysis method and analytical method are consistent, This can prove that the model of hydraulic cylinder is right in ANSYS.
基于有限元数值模拟结果与解析计算结果在数值和变化趋势上均趋于一致，充分地证明了建模的正确性。
According to lifting hoist reel tube shell structure and work situation, a 3-d calculated model of tube shell has been established with finite element analysis method.
采用有限元分析方法，根据提升绞车卷筒筒壳的结构和工作情况建立了筒壳的三维计算模型。
Adopting elastic finite element analysis method to analyze temperature stress in large area concrete beam-slab structure may provide basis for extra huge building design.
对此采用一套以弹性有限元分析为基础的方法，对大面积混凝土梁板结构温度应力进行分析，可为超大建筑物的设计提供依据。
Safety evaluation were carried out on the typical corrosion defect of Pipelines and facilities by finite element analysis method in Jingbian gas field for the first time.
首次采用有限元分析方法对靖边气田典型性腐蚀缺陷管道及设备进行了安全性评价。
The whole dynamic response process of the flexible impact between the human head and the composite material veneer is simulated using the3D finite element analysis method.
利用三维有限元分析方法模拟了人体头部与复合材料层板发生柔性撞击时的整个动态响应过程。
Adopting linear and nonlinear bearing model, this paper analyses the deformation and stress of bearing with large radius, basing on nonlinear finite element analysis method.
基于非线性有限元分析方法，采用了线性轴承模型和非线性轴承模型分析了大型四点接触球轴承的变形和受力。
Adopting finite element analysis method, the stress and deformation of gear coupling is analyzed, the cause of gear coupling failure is found, and the structure is optimized.
运用有限元分析方法，对齿轮联轴器进行应力、变形的分析，找出齿轮联轴器的失效原因并对它的结构设计进行了优化。
The rotor bearing system was analyzed by using a simple discrete method. The results of the analysis are quite different from those obtained under the finite element analysis method.
运用简单离散方法对该转子轴承系统进行了分析，其结果与有限元法偏差较大。
The natural frequency of the gas column in simple pipelines was solved using the finite element analysis method. The result agreed with that derived with transportation matrix method.
采用有限元分析方法，对简单管道气柱的固有频率进行求解，其结果与用传递矩阵法求得的结果是一致的。
The temperature field and warming process of the transient and steady state in the laser rod by symmetrical trigonal side-pumping were simulated using the finite element analysis method.
用有限元法计算模拟了三角均匀分布侧面泵浦结构激光棒瞬态温升过程及稳态温度分布情况。
The problem of achieving stable reliability analysis of piezoelectric trusses with random parameters was studied on the basis of the finite element analysis method and stable secular equation.
在有限元分析方法基础上，基于稳定特征方程对随机参数压电桁架结构进行稳定可靠性分析。
The problem of achieving stable reliability analysis of piezoelectric trusses with random parameters was studied on the basis of the finite element analysis method and stable secular equation.
在有限元分析方法基础上，基于稳定特征方程对随机参数压电桁架结构进行稳定可靠性分析。
应用推荐