Based on finite element method (FEM), the author compiles the three-dimensional seepage field computation program of RCC dam.
开展碾压混凝土坝渗流场的有限单元法研究工作，编制完成碾压混凝土坝三维渗流场计算程序。
In this paper, we performed modelling of DC resistivity sounding in tunnel using the finite element method (FEM).
本文用有限单元法对坑道内的直流电阻率测深进行数值模拟计算。
The calculation code including manifold method (MM) and finite element method (FEM) is developed to study the non-simultaneous coupling problem of stress-strain and seepage for discontinuous material.
提出了一个用流形元与有限元的变形和渗流非同步耦合的分析方法，用于模拟不连续块体在水压作用下的变形过程。
To obtain a constant gradient magnetic field outside unilateral nuclear magnetic resonance (NMR), optimal design method based on finite element method (FEM) and topology optimization is proposed.
为了在单边核磁共振仪器外产生梯度恒定的磁场，提出利用基于拓扑优化和有限元法的优化设计方法。
The variation finite element method (FEM) using the pseudo-potential function was presented for the simulation of transonic rotational flows.
本文运用赝势函数变分有限元方法数值模拟了绕翼型的跨音速有旋流动。
The thesis provides the concept of variable rigid body which simulates the grouting, and simulates the process of shield tunneling with finite element method (FEM).
本文提出了用变刚体模拟注浆体性质随施工过程的变化，用有限单元法模拟盾构法隧道施工的全过程。
The Monte Carlo method combined with the elastoplastic finite element method (FEM) is proposed to analyze the slope stability problems.
蒙特卡洛随机搜索法与弹塑性有限元法结合，求解边坡稳定问题。
The numerical analysis of finite element method (FEM) is an important means of modern engineering refined design, having become an indispensable engineering tool for designers.
有限元数值分析是现代工程精细设计的重要方法，已成为工程设计人员不可或缺的重要工具和手段。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).
用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。
The rectangular groove guide (RGG) is analyzed by the finite element method (FEM).
本文用有限元法分析了矩形槽波导。
Biomechanical analysis of artificial hip prosthesis was made by nonlinear finite element method (FEM).
并采用非线性有限元方法，进行人工髋关节的生物力学分析。
The numerical result of water temperature of reservoir in Longtan engineering by use of finite element method (FEM) is reliable and accurate.
通过对龙滩工程水库水温的计算结果表明，用有限元法计算水库水温有较高的精度和可靠性。
The effects of stator and rotor eccentricity on the magnetic field distributions, cogging torque and unbalanced force were calculated in this paper by using finite element method (FEM).
采用有限元法计算分析了定子偏心与转子偏心对无刷直流电动机的气隙磁场、定位力矩及单向磁拉力的影响。
We all know that both finite element method (FEM), symplectic algorithm and multi-symplectic algorithm are powerful tools to solve partial differential equations numerically.
我们知道有限元方法以及辛算法和多辛算法是解偏微分方程数值解的重要方法。
The effects of casing diameter on acoustic log in cased-borehole at free pipe situation are investigated with finite element method (FEM).
用有限元方法研究了自由套管井中不同直径的套管对声波测井的影响。
The stress distribution of continuous and recessed bonding single-lap joints is discussed with use of elastoplastic finite element method (FEM) and experiment, considering the effect of fillet.
运用弹塑性有限元法结合实验研究了连续和间隙连接的单搭接接头应力分布规律，并考虑了胶瘤的影响。
The resistivity, formation factor, and resistivity index of rocks were calculated using the finite element method (FEM) and we studied the effect of rock wettability on electrical properties.
利用有限元方法计算了岩石电阻率，进而得到岩石地层因素和电阻率指数，并考查了岩石润湿性对岩石电阻率指数的影响。
The effect of elastic modulus of adhesive on the str ess distribution in aluminium alloy single lap joint was investigated using elastic-plastic finite element method(FEM).
运用弹塑性有限元法，研究了胶粘剂弹性模量对含间隙的铝合金单搭接接头上应力分布的影响。
The bulk metal forming processes are calculated and analyzed by using a multi - step finite element method (FEM) based on deformation theory of plasticity.
运用一种基于全量理论的多步有限元方法计算分析了金属体积成形过程。
The variational of finite element method(FEM) using the pseudo-potential function is presented to design the airfoil shape of transonic rotational flows.
本文运用赝势函数变域变分有限元方法进行了跨音速翼型设计。
In this paper, finite element method (FEM) of axisymmetric linear elastic model has been used to calculate the tilt and strain induced by small annual temperature variations in a deep tunnel.
利用轴对称线弹性模型有限元方法，计算了洞室中温度微小年变化引起的地倾斜和地应变。
The transient heat transfer process of piston set-cylinder liner system in gasoline engine was researched with direct coupling finite element method (FEM).
采用直接耦合的有限元分析方法对一汽油机的活塞组—气缸套系统的瞬态传热过程进行了研究。
For the applications of the metal stamping numerical simulation system in the rolling stock manufacture, the forming parameters are all optimized in finite element method (FEM).
分析了冲压成形数值仿真系统在铁路车辆制造中的应用，指出了用显式有限元分析的方法，可以对冲压成形中各方面的参数进行优化处理。
The flow stress of ferrite/pearlite steel under uniaxial tension was simulated with finite element method (FEM) by applying commercial software MARC/MENTAT.
应用MARC/MENTAT商用有限元软件，对铁素体/珠光体钢的单向拉伸过程进行了有限元模拟。
The stress and displacement distributions of the bellows under torsion loading are investigated by using both finite element method (FEM) and equivalent cylinder method.
本论文分别采用有限元法和等效圆筒法对波纹管在扭转载荷作用下的应力分布和位移变化情况进行了计算。
The author researches the seepage characteristics of Longtan RCC dam by finite element method (FEM), and concludes the best suitable seepage control scheme of the dam after analysis in so many cases.
在对龙滩高碾压混凝土重力坝渗流特性进行分析时，就有关主要渗流影响因素进行众多计算工况的比较分析研究，得出大坝的最终优选渗控方案。
This dissertation successfully used cluster computing for solving large-scale linear algebraic equations problems when the finite element method (FEM) is applied in electrical prospecting.
本文成功地将机群计算应用到解决在电法勘探中使用有限元方法（FEM）时产生的大规模线性方程组问题。
A theoretical study on ultrasonic guide waves generated by a pulsed laser was presented, using the finite element method (FEM).
利用有限元法(FEM)对板状金属材料中脉冲激光激发的超声导波进行了理论研究。
A theoretical study on ultrasonic guide waves generated by a pulsed laser was presented, using the finite element method (FEM).
利用有限元法(FEM)对板状金属材料中脉冲激光激发的超声导波进行了理论研究。
应用推荐