Through the comparison of modal shape of floating caliper brake system elements by finite element modal analysis and experiment modal analysis, the validity of finite element model is confirmed.
通过对比浮钳式盘式制动器各零部件的有限元模态分析和试验模态分析所得出的模态阵型，验证了有限元模型的正确性。
The effects of disuse on trabecular bone structure was simulated, using the bone (re) modeling model with goals of physiological regulation, based on finite element analysis.
本研究将有限元分析与带有调整目标的骨再造方程相结合，模拟废用对松质骨结构的影响。
Complete finite element analysis is conducted on pile frame of SYR200 rotary pile drill with the model, which provides guiding reference for the design of pile frames.
使用这种模型对SYR200旋挖钻机桩架进行了整体有限元分析，分析对钻孔机桩架的结构设计有指导意义。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
By analysis of the middle section stress of the hollow slab in the two situations of consider contact and not consider contact, verified the accuracy of contact finite element model in that situation.
通过考虑接触与不考虑接触两种情况时桥面板跨中截面的受力分析，验证该问题中接触有限元模型的正确性。
Using complex structure finite element analysis, the theoretical prediction conforms with the experimental results very well, the equivalent model is reasonable, and the method is correct.
所建模型经复杂结构有限元方法分析，结果和试验相吻合，表明等效模型是合理的，方法是正确的。
A kind of finite segment element model for analysis of shear lag effect in plate and truss composite girder is proposed. The model avoids certain deficiencies in conventional calculations.
提出一种板桁结合梁剪滞效应分析的有限段单元模型，避免了常规计算方法中的某些不足。
The paper USES finite element method to calculate the whole reel structure of a ship lift and presents the mechanical model of finite element analysis for the structure as a whole.
采用有限单元法对升船机卷筒结构进行整体计算，提出了有限元分析的力学模型，对筒壳、幅板的强度及刚度作了全面分析。
It is also presented a finite element analytical model suitable for non-linear analysis of HFB flexural members.
采用有限元方法，建立适于冷弯截面受弯构件性能分析的非线性有限元分析模型。
Based on the finite element analysis (FEA) model of steel tube scaffold couplers, the corresponding connection of scaffold couplers and pre-load of slide wedge have been discussed.
在建立新型钢管脚手架扣件的有限元分析模型的基础上，对扣件各部件之间的连接以及斜楔的预紧力问题进行了处理。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。
Based on the spread rule obtained, a fast simulation spread model for 2050 hot strip roughing trains at Baosteel has been established by combining the finite element analysis and analytical model.
根据研究所得的宽展规律，采用有限元分析与解析计算相结合的方法，建立了适合宝钢2050粗轧区带钢宽展计算的快速仿真模型。
The modal experiment analysis on vibration mechanism will be completed by INV306 intellectualized signal collection and process analysis system for validating the finite element analysis model.
利用INV306型智能信号采集和处理分析系统对振动机构进行模态验证试验分析，以确定仿真模型和分析数据的正确性。
Objective: To establish a three-dimensional finite element model of normal human hip as a foundation of finite element analysis in this area.
目的：构建正常人体髋关节的三维有限元模型，作为该部位进一步有限元分析的基础。
Reducing the order of a large structural finite element model is important in improving the efficiency of finite element analysis in the field of structural dynamics and vibration.
对大型复杂结构振动有限元模型进行减缩降阶，是使结构有限元模型可有效地用在结构动力分析和振动计算方面的一个重要措施。
The finite element modal analysis of an effective model has been done after building up its analytic model by applying modern CAD techniques.
利用现代CAD技术建立有效的有限元分析模型，并在此基础上对其进行有限元模态分析。
Considering the interface slip, a nonlinear finite element analysis model is established by using finite element analysis soft-ANSYS, and gained a reasonable shearing connection coefficient.
利用有限元分析软件ANSYS，对组合梁的交界面相对滑移性能进行了非线性有限元分析，提出剪力连接系数的合理范围。
The finite element model of this sensor is built by applying the finite element analysis software ANSYS.
用有限元分析软件ANSYS建立了该传感器的有限元模型。
The similarity between equivalent stress distribution around the holes in cylindrical shell and its plate model is shown through finite element analysis.
有限元分析表明，开孔圆柱壳与其相应的平板模型在开孔附近的等效应力分布非常相似。
The method was discussed for how to integrate optimizing and building model with finite element analysis on 3D development and analysis of outer-tooth gear pump through UG design platform.
探讨通过UG设计平台，如何将优化程序、3D模型建立、有限元分析等，有机集成于外啮合齿轮泵齿轮3D设计和分析中去。
In this paper a practicable testing method for frame rigidity is described. The method is aimed at checking the finite element model of frame structure analysis.
为检验车架结构分析的有限元模型，通过一具体车架的刚度试验，总结出一套实用的车架刚度试验方法。
The finite element analysis model of cylinder and vessel head structures was established.
建立了高压容器筒体与封头结构的有限元分析模型。
Porous fluid pressure are also presented by using permeable mechanics method. Finite element model and stress analysis program are developed.
用有限元方法进行应力分析及设计保持井眼稳定的泥浆密度。
Finite element analysis for constraint model was conducted on the gear box casing of 7ypj agricultural tricar using modal analytic theory according to its structural characteristics.
针对7ypj型农用三轮汽车齿轮箱体的结构特点，应用模态分析理论对其进行了约束模态的有限元分析。
This paper describes the finite element analysis model, load condition and results of C37-type hopper car body exported to Australia.
介绍了出口澳大利亚c37型漏斗车车体有限元分析模型、载荷工况和结果。
Then, by using beam element and MPC184 element, the finite element model for strength analysis was setup and simplified.
然后利用梁单元和MPC184单元，建立了供强度计算的有限元模型并进行了简化。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
用TL法分析研究，建立了二维弹性大变形接触问题的一般实用有限元分析模型。
To compare the results of static and dynamic test with initial finite element model calculations, error analysis of finite element modeling has been developed.
基于试验模型的静力试验和振动试验结果与初始有限元模型计算结果的比较，展开对面向健康诊断的悬索桥有限元建模的模型误差分析。
The finite element analysis model of truss structures was established.
建立了桁架结构的有限元分析模型。
The finite element analysis model of truss structures was established.
建立了桁架结构的有限元分析模型。
应用推荐