Engineers are also investigating how to use molten salt itself as the heat-transfer fluid, reducing heat losses as well as capital costs.
工程师也正在研究如何让熔盐本身成为热交换液以减少热流失及成本。
Numerical simulation is a effective method for solving problems of fluid flow and heat transfer in complex geometries.
数值模拟是解决复杂区域的流动和换热问题的一个行之有效的方法。
The effective thermal conductivity model and coupled model were developed for simulating the influences of fluid flow on heat transfer and solidification in continuous casting process.
综述了在连铸数值模拟过程中，为评估流体流动对铸坯热量传递和凝固过程影响所开发的有效导热模型和耦合模型。
A major advantage of fluidised beds is that they provide a well mixed, high surface area, fluid-solid system which is useful for efficient reactions and heat transfer.
流化床的一大优点在于能产生一个充分混合的具有很大表面积的流体与固体的接触系统，这对高效反应和传热都很有用。
Besides the minority of strong oxidizer outside, it can be used to seal hot water, overheating steam, heat transfer fluid, ammonia solution, hydrocarbons, low temperature liquids, and other media.
除少数的强氧化剂外，它能用于密封热水、过热蒸气、热传递流体、氨溶液、碳氢化合物、低温液体等介质。
Using the fluid differential unit, the heat transfer mathematic model of heat pipe bioreactor (HPBR) was established by the calculated fluid hydrodynamics (CFD).
从流体微元出发，用计算流体力学（CFD）的方法建立热管生物反应器的传热数学模型。
In fluid bed, both particles and carrier gas occur violent turbulence so that the heat transfer and mass transfer in the furnace are speeded.
在流化床中，粒子和炉气发生剧烈的紊流运动，加快了炉内传热和传质过程。
Centrifugal buoyancy arising from radial temperature gradient of fluid has a great influence on the enhanced heat transfer performance of swirling flow.
由流体径向温度梯度引起的离心浮力对旋流强化传热效果有重要影响。
The results of experimental investigation on heat transfer and fluid pressure drop of spirally fluted titanium-tubes for steam condensation are reported and analyzed.
摘要介绍了钛螺纹槽管传热及流动阻力的实验结果，并对结果进行了分析。
The heat transfer principle of power maximization in power plants with heat transfer irreversibilities is extended to fluid flow.
将具有传热不可逆性的动力装置功率优化传热原理扩展到流体流动分析。
In this paper, some progress attained in recent years on heat transfer and fluid flow in weld pool was summarized, then generalized the factors that influenced heat transfer and fluid flow greatly.
文中概括了近年来焊接熔池传热与流体流动模拟所取得的一些进展，总结了影响熔池传热和流体流动的一些主要因素。
How to confirm the internal boundary condition is a difficulty for above fluid-solid coupling heat transfer system.
确定此系统的内部边界条件成为发动机传热研究的难点。
The bottom of the reservoir shall be designed to provide adequate retention time of the heat transfer fluid to ensure positive heat transfer.
流体贮存器必须为热传导流体提供适当的停留时间，以保证能够进行充分的热交换。
DSG power vs Heat Transfer fluid (HTF) - are the promises of 20% cost reduction in electricity prices through DSG really possible?
副法律政策专员功率与传热流体(导热油)-是20%的电力价格降低成本的承诺，通过DSG的可能吗？
A mathematical model has been established for fluid flow and heat transfer in weld pool with a deformed surface.
建立了熔池表面存在变形的流场与热场的数学模型。
The experiments involve different branches of Mechanical Engineering knowledge, so we try to assign the students for maximum exposure to heat transfer, dynamics, thermo, fluid mechanics, etc.
各项实验需应用机械工程领域中不同的知识，因此我们在分组时会尽可能使同学接触到热传学、动力学、热力学、及流体力学等领域。
Based on theories of computational fluid dynamics and heat transfer, an axial symmetry finite element model of velocity and temperature field of spot welding for aluminum alloy is established.
根据计算流体力学与传热学原理，建立了描述铝合金电阻点焊液态熔核流动行为和传热过程的轴对称有限元模型。
It is proved that this algorithm can be effectively used to simulate fluid flow and heat transfer in complex geometry, by the validation calculation of flow inside branching channel.
通过对分汊通道内的流动问题进行验证计算，结果表明该算法可以有效而准确地模拟复杂区域内的流动与换热问题。
It demonstrate the new principle of convective heat transfer enhancement by changing the Angle between fluid flow and heat flux.
从而验证了改变气流方向和热流密度矢量之间夹角可以强化换热的这一强化传热新原理。
Motor heat dissipation shall be accomplished by circulating a heat transfer fluid from an integral reservoir through channels that are internally cast into the motor stator housing.
电机散热应该通过热传导流体的循环流动来完成，这些流体从一体式贮存器流经内铸管道，进入电机定子外壳。
The boundary condition of temperature field for waved-edge milling insert is researched based on the heat transfer, fluid dynamics and metal cutting theory.
通过传热学、流体力学、切削理论的综合运用对波形刃铣刀片温度场边界条件进行了研究。
This paper describes data processing, mathematical models, calculation methods and flowcharts in the heat transfer calculation for multi - fluid plate-fin heat exchangers.
本文阐述多股流板翅式换热器传热计算中的数据处理、数学模型、计算方法和框图。
The irregular grid finite-volume method is proposed for computation of heat transfer and fluid flows in complex region.
提出用非规则网格有限体积法计算不规则边界区域的传热和流体流动问题。
MEPCM has been widely applied in the filed of textile, heat transfer fluid, building, military, agriculture and so on.
相变材料微胶囊已经广泛应用于纺织品、传热流体、建筑物、军事、农业等领域。
The reaction characteristics of synthesizing methyl chlorsilane by direct method and the heat transfer of the fluid bed in the reactor were analyzed.
分析了直接法合成甲基氯硅烷的反应特点及反应器内流化床的传热过程。
Based on that, the numerical of product leakage and its method of solving are proposed, which include volume balance calculations, heat transfer models and transients fluid flow models.
基于这一思想，给出了管道泄露检测的数学模型，即体积流量平衡模型、热力平衡模型、瞬变流动模型及其求解方法。
The irreversibility of heat transfer and fluid flow in regenerative he at exchanger was analyzed, and the number of entropy generation units was introduced.
分析了蓄热式热交换器传热和流动过程的不可逆性，提出了熵产数的概念。
The model takes into account the effect of the heat transfer in the wellbore and fractures during fracturing fluid injection on fracture geometry.
该模型考虑了注液过程中的井筒温度变化和裂缝中的热交换对裂缝几何形态的影响。
The porous thermal hydraulic model is used to calculate complex fluid flow and heat transfer in rod bundle. The simulating calculation is verified through experiment.
采用多孔体模型对流体在棒束间的复杂流动传热进行了模拟计算，并将模拟计算结果与实验数据进行了比较。
The porous thermal hydraulic model is used to calculate complex fluid flow and heat transfer in rod bundle. The simulating calculation is verified through experiment.
采用多孔体模型对流体在棒束间的复杂流动传热进行了模拟计算，并将模拟计算结果与实验数据进行了比较。
应用推荐