The concept of heat treating foods to inactivate pathogenic organisms is termed appropriately "pasteurization" today.
今天人们把这种对食品进行热处理使致病生物体失活的概念恰当地称为“巴氏灭菌”。
The process of heat treating is the method by which metals are heated and cooled in a series of specific operations that never allow the metal to reach the molten state.
金属热处理过程其实是一系列具体的操作，通过这些操作加热与冷却金属，但加热时进行控制，使得金属不达到熔融的状态。
Other uses for this high power diode laser bar are as a direct source for various materials processing applications including cladding, welding, heat treating and brazing.
该高能半导体激光器的其他用途包括，用作各种材料处理应用的激光光源，这些处理应用包括覆层、焊接、热处理和铜焊接。
Please wear heat protective gloves when using the heat treating furnace.
使用热处理炉的时候请戴好隔热手套。
Special heat treating process will bring latent properties of high speed steel with Co into full play and obviously improve its strength and toughness.
含钴高速钢采用特定的热处理工艺处理，可充分发挥材料的潜在性能，显著提高其强韧性。
Plating, heat treating and machining operations can also be used.
仍然可以进行电镀、热处理和机加工作业。
Gas, oil and electric furnaces are commonly used for heat treating metals.
金属热处理常用煤气炉、油炉和电炉。
This paper researched a method of heat treating to inactivate trypsin in dolichos lablab.
该文主要研究热处理钝化扁豆液中胰蛋白酶抑制子的方法。
But just how do we go about doing this, in other words, how does one define "good" heat treating?
但是，我们要如何去做呢，换句话说，如何定义“好的”热处理？
The cutting performances of saw blade by solution and non-solution heat treating were determined.
对比测定了经固溶处理和未经固溶处理锯条的锯切性能。
The following table shows the material composition and heat treating details of a ball screw system.
下表列出了丝杠部件的材料构成和热处理工艺。
The temperatures required for heat treating are much higher than an engine will ever reach during operation.
热处理需要的温度要比发动机运行时达到的温度要高的多。
CRACK: Surface defect on product caused by improper heat treating process during the process of producing steel.
裂痕：因为热处理工艺不恰当而产生在产品表面的损伤。
It is reviewed and discussed for industrial application and economical benefit of vacuum heat treating technology.
同时，对我国真空热处理技术的工业应用及经济效益进行评述。
The remaining 20%of the acetylene production is principally used for oxyacetylene cutting, heat treating, and welding.
乙炔生产的剩余20%主要用于氧乙炔切割、热处理和焊接。
During induction heat treating of pump tube, quenching machine tool plays a key role to fulfill the required properties.
在成套泵筒感应热处理设备中，淬火机床对满足性能要求起着关键作用。
The effect of rare-earth elements to prevent oxidation and decarburization in heat treating salt bathshas been discussed.
本文就稀土对盐浴防氧化脱碳的作用进行了研究。
The results show that the purification and the heat treating can not improve the hygroscopic property of attapulgite effectively.
研究结果表明：提纯和热处理并不能有效的改善凹凸棒石粘土的吸湿性能。
These products may be ordered with the organic binding agents already removed by heat treating following the manufacturing process.
定购这些产品时，可以要求在制造流程之后通过热处理方法除去有机粘合剂。
At the same time, it is reviewed and discussed for industrial application and economical benefit of vacuum heat treating technology.
同时，对我国真空热处理技术的工业应用及经济效益进行了评述。
The effect of heat treating process on the magnetic characteristics of Low-neodymium-iron-boron alloy has been studied in this paper.
本文研究了热处理工艺对低钕铁硼合金磁性能的影响，得到了符合交换耦合理论的结果。
Manufacturing is defined as the process of making production materials, parts or assemblies, or heat treating, painting, plating services.
制造的定义为制作生产原料，零件或组装，或热处理，涂装与电镀服务。
The system has the multi-functions, simple system and practical operation, therefore, it will be widely used in the heat treating industry.
该系统具有功能多、系统结构简洁明了、操作性能强等优点，在热处理行业中应用十分广泛。
Different morphologies of carbides and different matrixes have been obtained by heat treating the medium chromium cast iron in different ways.
通过对中铬铸铁进行不同的热处理，得到不同的碳化物形貌和基体。
The layout characteristic of domestic heat treating product line and the development trend of heat treatment process for medium plate are introduced.
介绍了目前国内中厚板热处理生产线的布置特点与热处理工艺发展趋势。
This paper introduces the application and method of implementing of Digitronik SDC40B in double cross limit combustion control mode of heat treating furnace.
本文讨论了SDC40 B可编程数字调节器在热处理炉双交叉限幅控制方式中的应用。
The mathematical model experimental study about velocity field in a car-bottom heat treating furnace is carried out by using numerical simulation technology.
利用数值模拟技术，对台车式热处理炉的速度场进行了数学模型实验研究。
Heat processing: normal heat treating and chemical heat treating of steel and nonferrous metal; testing the hardenability of steel; surface treatment of steel.
热处理：钢及有色金属的常规热处理与化学热处理，钢的淬透性测试，钢的表面处理等。
The test results offered a theoretical basis for determining the heat treating technic parameters of U74 rail steel, and the quenching quality can be improved.
从而为现有U74轨钢制定淬火工艺参数提供理论指导，以提高其淬火质量。
The test results offered a theoretical basis for determining the heat treating technic parameters of U74 rail steel, and the quenching quality can be improved.
从而为现有U74轨钢制定淬火工艺参数提供理论指导，以提高其淬火质量。
应用推荐