Using the fiber laser as light source, Stable performance, High photoelectric conversion efficiency, Low energy consumption.
采用光纤激光器作为光源，性能稳定，光电转换效率高，能耗低。
DOE with high diffractive efficiency can be fabricated by laser aided fabrication technology LDWS (laser direct writing system), similar to the way manufacturing micro electronics.
采用类似于微电子加工手段的激光辅助制造技术——激光直写技术，可以制作具有高衍射效率的DOE。
Solid-state tube laser (SSTL) is one of available laser with high power output, for its high slop efficiency and electro-optical efficiency compared to the solid-state rod laser.
管状固体激光器可获得较高的斜效率及电光转换效率，因此是人们寻求可获得高输出功率的有效器件之一。
At the same time CCD pickup camera and laser sensor are combined to meet the high efficiency and high accurateness requirements of this non-contact measure.
同时测量系统中采用CCD摄像头和激光传感器相配合，实现了高效、高精度的非接触式测量方案。
In the high efficiency and small signal region, we investigate theoretically the efficiency enhancement mechanism of far infrared free electron laser (FIR-FEL) with a reverse tapering waveguide.
在高效率和低电流小信号范围内，理论地分析了用反向渐变波导提高远红外波导自由电子激光器(FIR - FEL)效率的机理。
It owns high working efficiency, high laser power and simplicity of operator.
工作效率高，激光功率大，操作简单。
The people's studious aim is that the silicon materials can realize high luminescence efficiency and prepare efficient laser apparatus and LED.
硅基材料能否实现高效发光，从而做成高效率的激光器及发光二极管等，这是人们一直追求的目标。
High efficient laser could be obtained by up-converting, so a most important task is to improve the efficiency of up-conversion.
通过对上转换的研究可以得到效率更高的激光器，而提高上转换效率是当前研究的重中之重。
The advantage of laser cutting is that the operation is simple, the precision is high, the cutting speed is fast, and the efficiency is high.
激光下料的好处在于操作简单、精度高，切割快速，效率高。
The double-clad fiber laser has the advantages of simple structure and high reliability, high output power, high conversion efficiency, high beam quality.
它具有结构简单紧凑、输出功率高、稳定可靠、光电转换效率高、光束质量好等优点。
Very high efficiency and stable single frequency (SF) operation was obtained by using model 801D ring dye laser at normal pumping level.
本文报告了利用801D型环形染料激光器，在一般泵浦功率下获得了甚高效率的相当稳定的单频运转结果。
A new type of laser welding machine is introduced in this paper. New conception and reasonable design were adopted. The machine possesses not only superior function but also high efficiency.
本文介绍的金刚石锯片激光焊机，采用新颖的构思、合理的设计，使机器不但具有优越的性能，而且具有高的生产效率。
The main factor limiting the output energy and efficiency of high power solid state laser drivers used in ICF is the small-scale self-focusing.
用于惯性约束核聚变(icf)的高功率激光在传输中的小尺度自聚焦是使光束质量变坏和限制输出功率的主要因素。
With appropriate choice of laser medium parameters, high pumping efficiency and good pump uniformity can be obtained for corner-pumped composite slab lasers.
通过选择合理的激光介质结构参数，角泵浦方式也能得到高的泵浦效率、较好的泵浦均匀性和激光输出。
Since coating and laser beam irradiation can be performed parallel, operation efficiency is high.
由于并行进行涂敷和激光照射，所以，作业效率高。
It is proposed to make a high power solid laser amplifier tentative design in the paper, which is going to have great energy utilization efficiency and strong output.
本文力求设计出一种高能量固体激光放大器方案，它要具有很高的能量利用效率以及输出光强。
Based on this analysis we have designed two type lens ducts and the coupling efficiency as high as 84% with quasi CW laser diode array was obtained for ar uncoated lens duct.
基于这种分析，我们设计了两种结构的透镜导管，用激光二极管阵列实验测得未镀抗反膜的透镜导管的耦合效率高达84%。
The power supply adopts zero-current half-bridge soft switching circuit, featuring high efficiency, fast response and easy matching for laser tubes produced by various manufacturers.
本电源采用零电流半桥软开关电路，使电源具有效率高，响应速度快的特点，很容易配合各种厂家的激光管。
High efficiency soliton laser produces qualified optical solitons that is important for long distant soliton fiber communications.
高效率的孤子激光器所产生的高质量光孤子能为长途光通信准备良好的初条件。
Laser, power source, the work platform USES the integration structural design. The efficiency of marking is high and marking metal is better.
激光器、电源、工作台一体化结构，打标效率高，金属打标效果好。
A method for the high efficient power coupling of large emitting area pulsed semiconductor laser and standard communication fiber is given and its measured coupling efficiency is up to 21%.
给出一种实现大发光面脉冲半导体激光器与标准通信光纤的高效耦合方案，实测耦合效率达21％。
Since TEC has the disadvantage of limited power and low efficiency, the cooling effect is not as effective as expected when used to control the temperature of high-power laser diodes.
TEC存在功率有限、制冷效率低的问题，在用于大功率半导体激光器的温度控制时，常常无法达到所需的制冷效果。
The results show that the high spectral beam combining efficiency for more beams can be obtained by this method, which provides a doable way for high power laser.
当光谱宽度较窄时，实现多路光束较高的合成效率是可行的，这为高能激光的获得提供了一种确实可行的方法。
The principle and method of applying laser technology to the lens centering are discussed. The merits of it are high efficiency and accuracy.
本文介绍了激光技术应用于光学透镜定心的加工原理和方法，它具有高效率、高精度的优点。
Owing to its high efficiency, it is especially suitable for the experiments of ultrashort femtosecond pulse laser produced plasmas.
由于其高效率，该谱仪尤其适用于超短飞秒脉冲激光产生等离子体的实验研究。
The using of chirped laser pulse can restrain the Rabi oscillations and realize high efficiency of photoionization.
利用光脉冲的啁啾效应，可以抑制拉比振荡实现高效率的光电离。
The laser-TIG hybrid welding technique, with the characteristics of high welding speed, high efficiency and quality, is being paid more attention by the domestic and foreign researchers.
激光-电弧复合热源焊接具有高速、高效、接头质量优异等特点，目前正在被国内外的研究者日益关注。
The developed laser processing CAM system is practical with high speed and high efficiency for laser processing of complex 3D parts.
开发出的三维激光加工软件实用性强，可快速、高效地完成对三维复杂形状工件的激光加工。
Laser spot welding will take the place of the traditional joining methods such as resistance welding and rivet connection for its high precision and high efficiency.
激光点焊具有高精度，高效率等特点，在航空航天工业中有望替代传统的电阻点焊和铆接等连接方法。
Laser spot welding will take the place of the traditional joining methods such as resistance welding and rivet connection for its high precision and high efficiency.
激光点焊具有高精度，高效率等特点，在航空航天工业中有望替代传统的电阻点焊和铆接等连接方法。
应用推荐