It shows high dimensional stability, rigidity and high impact strength.
它具有优秀的尺寸稳定性，刚性，耐冲击等特性。
The polycarbonate also exhibits high impact strength and reduces the risk of accidental damage during the course of a surgery.
聚碳酸酯还具有很强的耐冲击特性，在手术过程中能减少仪器意外破碎带来的风险。
The polycarbonate- polysiloxane copolymer resin composition has high impact strength at low temperature and high mechanical strength.
所述聚碳酸酯-聚硅氧烷共聚物树脂组合物在低温下具有高抗冲强度并具有高机械强度。
With high impact strength PC embossed sheet, may provide UV protection on one side or both sides, widely used in constructions and decorations.
可提供单面或者双面抗uv功能，广泛应用于建筑以及装潢材料。
In general, most of the thermoplastic materials offer high impact strength, corrosion resistance, and easy processing with good flow characteristics for molding complex designs.
一般而言，大多数热塑性材料具有较高的抗冲击强度、耐腐蚀性以及良好流动性使其容易加工而适于复杂成型设计。
However, in case the content of EP copolymer was controlled at not higher than 10%, then the PP alloy would possess not only the high impact strength but also the flexural module.
若控制合金中乙丙共聚物的含量不超过10%，则可使PP合金材料既具有较高的冲击强度又具有较高的模量。
Finally, the two types of toughened pa alloy products have been developed and produced, which were proved to possess high impact strength and good technical and economic performance.
根据实验研究的结果，研制和试产了增韧效果明显、技术经济性良好的两大类增韧尼龙合金产品。
The cellphone window protecting screen has high impact strength, high scratch resistance and high safety, and the process has low production cost, high production efficiency and high product quality.
在超薄玻璃层上镀 覆超硬膜并贴合防裂膜，具有较高的附着力和抗划伤能力、抗冲击强度，明显降低生产成 本，产品的生产效率及良品率以及使用的安全性均得到有效提高。
Therefore, the liner materials should be required to have both very high surface to resist the drilling and cutting of ore and very high strength and toughness to resist impact Lord.
因此，对衬板材质的要求是：既要求具有很高的表面硬度，以抵抗矿石的凿削与切削，又要求具有很高的强度与韧性，以抵抗冲击载荷。
F. shell is made of high strength aluminum alloy material, resistant to strong collision and impact resistance.
外壳选用高强度铝合金材料，具有抗强力碰撞和冲击能力。
Mechanical properties and fracture mechanism of high strength steel sheet with low yield ratio under impact loading have been studied through instrumented impact and quasi-static tensile tests.
通过室温下的仪器化冲击试验和静态拉伸试验，研究一种低屈服比高强度钢板在冲击载荷下的力学性能和断裂机理。
The quenched and tempered steel WH80Q offers high strength, excellent low temperature impact toughness, lamellar tearing resistance and lower aging sensitivity factor.
舞钢研制开发的调质钢wh80 Q具有高强度、良好的低温冲击韧性、抗层状撕裂性能、较低的时效敏感性系数。
The Charpy impact properties of high strength pipeline steel with different microstructures have been studied through a series of the instrumented impact tests.
采用示波冲击试验方法研究了具有不同微观组织高强度管线钢的夏比冲击性能。
Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.
硬质橡胶是一种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度的特种橡胶制品。
This article introduces the impact of flame-cutting on high strength lower alloy structural steels from curious aspects Such as remnant stress, quench rigidity, cementite and so on.
介绍了火焰切割对低合金高强度钢在残余应力、淬硬、渗碳等方面的影响。
But the impact strength of PP is not high, low temperature issued crisp, easy to burn.
但是聚丙烯的抗冲击强度不够高，低温下发脆，容易燃烧。
Ceramics are often used as protective materials against impact damage because of their desirable properties such as low density, high hardness and compressive strength.
陶瓷材料由于具有硬度高，抗压强度高，低密度等优良的力学性能，被经常用作抗冲击的防护材料。
The Charpy impact properties of high strength pipeline steel with different microstructure were investigated.
研究了具有不同微观组织类型的高强度管线钢的夏比冲击韧性。
The results showed moisture adsorption of the platen dried veneer was lower and its dimensional stability was better, but its impact strength dropped when pressing temperature was too high.
研究结果表明：高温热压后的板材吸湿性降低，尺寸稳定性好，但热压温度过高会产生木材热分解，冲击强度略有降低。
Furthermore, the modification has no obvious influence on the hardness of high boron and low carbon ferroalloy, but increases its impact toughness and bending strength obviously.
此外，变质处理对高硼低碳铁基合金硬度无明显影响，但明显提高抗弯强度和冲击韧度。
The composition exhibits an improved combination of high flow during molding and high post-cure stiffness and impact strength.
该组合物展现出在模塑期间的高流动性以及高固化后硬度和冲击强度的改进组合。
Advanced high strength after quenching and tempering has good mechanical properties and low temperature impact toughness.
高强度的高级淬火低温回火后具有良好的综合力学性能和低温冲击韧度。
Low viscosity, high strength, resistant to impact, vibration and solvent.
低粘度，高强度，耐冲击、耐振动、耐溶剂性优良。
Moreover, the invention provides higher impact strength and tensile strength for products and is a low-foamed sheet special regulator which has small dosage and high efficiency.
并且能为产品提供较高的冲击强度和拉伸强度，是一种用量少效能高的低发泡板材专用调节剂。
Thus, requirements of steel with high elastic limit, high fatigue strength and high impact toughness and plasticity.
因此，要求钢具有高的弹性极限，高的疲劳强度以及高的冲击韧性和塑性。
This kind of brazing filler metal had a good filling performance, at the same time, sound high-temperature strength and impact toughness can be obtained in the joint.
该钎料不仅具有较好的填缝能力，同时获得的钎缝接头具有良好的高温强度和抗冲击性能。
The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.
切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
The experimental results show that the flame retardancy of blends reach to GB 4609-84 FV 0 grade, and the impact strength could be higher than ordinary or high impact ABS resins.
实验结果表明：经适当配比的该阻燃体系不仅达到了垂直燃烧GB 460 9—84,FV0级标准，而且体系的冲击强度可高于通用ABS树脂和高冲击abs树脂。
High strength galvanized steel is widely used in vehicle body and safety part manufacture for well mechanical performance, erosive - resistant performance and impact-resistant performance.
高强度镀锌钢具有良好的机械性能、耐蚀性能和抗冲撞性能，因而被广泛应用在汽车车身及安全件制造上。
The impact of sodium nitrite on the microstructure and strength of hydrate product of high water content material is investigated.
研究表明：高水充填材料的水化产物主要是以钙矾石为主的胶凝材料；
应用推荐