Introduced the properties, main manufacture methods and application of casting high speed steel rolls.
着重介绍铸造高速钢轧辊的性能特点、主要制造方法和在轧钢行业中的应用。
The paper deals with YG6 coating on fore-and-aft face of high speed steel tool with high power CO_2laser.
利用高功率CO_2气体激光器对高速钢刀具前、后面进行YG6表面涂敷；
The valence electron structures and covalent bond energy have been calculated for cobalt high speed steel.
计算了含钴高速钢的价电子结构与共价键能。
The results indicate that pulse magnetization can significantly prolong the lifetime of the high speed steel tools.
结果表明，脉冲磁化处理能够明显地提高高速钢刀具寿命。
Incomparision to tile traditional power hacksaw blade made of high speed steel, this blade was very cheap and tough.
与传统的高速钢锯条相比，这种锯条的韧性大大改善，而成本大幅度降低。
All normal designs are made of high speed steel quality material no. 1.3343 and can be supplied in cobalt alloyed too.
所有的普通设计都是选用高速钢材质，钢号：1.3343并可提供钴合金材料。
The wear of the unmagnetized and magnetized high speed steel material are compared in the wear between pin and disk text.
通过销盘的磨损对比试验，对进行了磁化处理的与未作磁化处理的高速钢材料作了耐磨损性能的研究。
The present paper has briefly described the basical technologies of sintered high speed steel products and their properties.
本文简述烧结高速钢制品的基本生产工艺及其性能。
This method is launched in 1970, the special steel industry, quickly promoted to improve the performance of high speed steel.
这种方法是在1970年推出后，特殊钢行业，迅速晋升为提高高速钢的性能。
The high speed steel (HSS) as a roll material significantly increased the service life of hot and cold strip milling work rolls.
高速钢用作轧辊材料使冷、热带钢工作辊寿命得到大幅度提高。
The overall design, layout, parameters and structure of high speed steel wire armoring strander for fiber optic cables are presented.
主要介绍新型光缆钢丝铠装高速成缆机的总体设计、布局、参数、结构特点。
Upon characteristics analysis of high speed steel, forging technology of high speed steel and sequential heat treatment have been introduced.
在分析高速钢特性的基础上，介绍了高速钢的锻造工艺及其锻后热处理。
Compared with the high carbon high speed steel without modification treatment, the impact toughness is increased by 73.6 %, with same hardness.
变质后高碳高速钢辊环在硬度不变的情况下，冲击韧性提高了73.6 %。
This article in the light df the main wear type of high speed steel tool and common hard alloy tool, design 'es a new kind wear resistance coating.
本文针对高速钢刀具和普通硬质合金刀具的主要磨损形式，设计了一种新型的刀具耐磨涂料。
Ferrovanadium can be used as additive in smelting high-intensity-low-alloy steel, high speed steel, tool steel, stainless steel and permanent magnet.
钒铁用作炼钢的添加剂，生产高强度低合金钢、高速钢、工具钢、不锈钢及永久磁铁等。
Special heat treating process will bring latent properties of high speed steel with Co into full play and obviously improve its strength and toughness.
含钴高速钢采用特定的热处理工艺处理，可充分发挥材料的潜在性能，显著提高其强韧性。
The results indicate that pulse magnetization can improve the wear of high speed steel, and meanwhile it prolongs the lifetime of high speed steel material.
实验结果表明：脉冲磁化处理能够提高高速钢材料的耐磨损性能，可以显著地提高高速钢材料的使用性能。
The process of making high speed steel by direct alloying of scheelite, molybdenum oxide and V2O5 is calculated and analyzed by thermodynamics and kinetics.
对用白钨矿、氧化钼和V2O5直接合金化冶炼高速钢进行了热力学和动力学的计算和分析。
This series machine is suitable of ferrous, nonferrous metal and some kinds of non-metal materials with hard alloy, high capacity and high speed steel tools.
本机床主要适用于高速钢、硬质合金及陶瓷刀具切削加工黑色金属、有色金属及部分非金属零件的内外圆柱面、内外圆锥面、沟槽、平面。
The energy absorptivity and hardness of knife surface are obviously increased using graphite coating during laser thermal treatment for high speed steel knife.
采用石墨涂层，对高速钢刀片进行了激光热处理，显著地提高了刀片表面的能量吸收率和硬度。
An experimental study on the wear of pulse magnetized cemented carbide and high speed steel tools has been carried out according to the orthogonal design scheme.
通过现场正交优化试验，对经过脉冲磁化处理的硬质合金及高速钢刀具的耐磨性能进行了研究。
This paper introduces three methods of rapid softening and annealing for high speed steel. There are many advancetages of energy-saving, short cycle and low cost.
本文介绍了高速钢快速软化退火的三种方法。这些方法具有节能、高效、周期短、成本低等特点。
High carbon high speed steel (HSS) is a new material replacing common wear resistant alloy. Quenched high speed steel roll sleeve has high hardness and poor workability.
高碳高速钢是取代普通耐磨合金制造轧辊的新材质，淬火高速钢辊套硬度高，内孔加工性能差。
The study results about structure of the aging hardening high speed steel have been obtained. This paper is of great importance in developing a new series of tool steels.
时效高速钢的组织结构进行了系统研究，提供了有关研究结果。对于进一步开展这方面的研究具有一定的参考价值。
Diamond-like carbon DLC thin films were deposited onto si 100 and high speed steel substrates by mid-frequency magnetron sputtering system SP0806AS, Beijing Power tech Co.
采用SP0806AS中频磁控溅射镀膜机，在硅(100)和高速钢基体上，采用双石墨靶在不同功率下沉积了类金刚石薄膜。
We research the effect of high speed steel compositions, centrifuge casting technology parameter and composite modification on the properties of high speed steel roll collar.
研究了高速钢成分、离心铸造工艺参数和复合变质处理对高速钢辊环性能的影响。
According to real production case of our country, it is necessary to establish the standard about the conversion tables on hardness and strength of hardened high speed steel.
根据我国具体的生产实际情况，有必要建立我国自己的淬硬高速钢洛氏硬度和维氏硬度换算的标准。
According to real production case of our country, it is necessary to establish the standard about the conversion tables on hardness and strength of hardened high speed steel.
根据我国具体的生产实际情况，有必要建立我国自己的淬硬高速钢洛氏硬度和维氏硬度换算的标准。
应用推荐